@@ -101,7 +101,15 @@ port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
- remote-endpoint = <&usb_1_dwc3_ss>;
+ remote-endpoint = <&redriver_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&ocp96011_sbu_mux>;
};
};
};
@@ -761,6 +769,13 @@ typec-mux@42 {
mode-switch;
orientation-switch;
+
+ port {
+ ocp96011_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ data-lanes = <1 0>;
+ };
+ };
};
/* AW86927FCR haptics @ 5a */
@@ -784,6 +799,27 @@ typec-mux@1a {
retimer-switch;
orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ redriver_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ redriver_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+ };
};
};
@@ -805,6 +841,14 @@ &mdss {
status = "okay";
};
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+};
+
&mdss_dsi {
vdda-supply = <&vreg_l6b>;
status = "okay";
@@ -1301,10 +1345,6 @@ &usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&pmic_glink_ss_in>;
-};
-
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l10c>;
vdda18-supply = <&vreg_l1c>;
@@ -1331,6 +1371,10 @@ &usb_1_qmpphy {
status = "okay";
};
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&redriver_ss_in>;
+};
+
&venus {
firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
status = "okay";
@@ -3639,6 +3639,8 @@ usb_1_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -3654,6 +3656,7 @@ port@1 {
reg = <1>;
usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
};
@@ -3661,6 +3664,7 @@ port@2 {
reg = <2>;
usb_dp_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp_out>;
};
};
};
@@ -4267,6 +4271,7 @@ port@1 {
reg = <1>;
usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
};
};
@@ -4820,7 +4825,9 @@ dp_in: endpoint {
port@1 {
reg = <1>;
- mdss_dp_out: endpoint { };
+ mdss_dp_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+ };
};
};
Extend the USB graph to connect the OCP96011 switch, the PTN36502 redriver, the USB controllers and the MDSS, so that DisplayPort over USB-C is working. Connect some parts of the graph directly in the SoC dtsi since those parts are wired up like this in the SoC directly. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 54 ++++++++++++++++++++-- arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++- 2 files changed, 57 insertions(+), 6 deletions(-)