diff mbox series

[v2] media: imx335: Set vblank immediately

Message ID 20250228091731.236162-1-paul.elder@ideasonboard.com
State New
Headers show
Series [v2] media: imx335: Set vblank immediately | expand

Commit Message

Paul Elder Feb. 28, 2025, 9:17 a.m. UTC 
When the vblank v4l2 control is set, it does not get written to the
hardware unless exposure is also changed. Change the behavior such that
the vblank is written immediately when the control is set, as setting
the vblank without changing the exposure is a valid use case (such as
for changing the frame rate).

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

---
Changes in v2:
- error check the modify range
- improve commit message
---
 drivers/media/i2c/imx335.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index fcfd1d851bd4..0beb80b8c458 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -559,12 +559,14 @@  static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
 			imx335->vblank,
 			imx335->vblank + imx335->cur_mode->height);
 
-		return __v4l2_ctrl_modify_range(imx335->exp_ctrl,
-						IMX335_EXPOSURE_MIN,
-						imx335->vblank +
-						imx335->cur_mode->height -
-						IMX335_EXPOSURE_OFFSET,
-						1, IMX335_EXPOSURE_DEFAULT);
+		ret = __v4l2_ctrl_modify_range(imx335->exp_ctrl,
+					       IMX335_EXPOSURE_MIN,
+					       imx335->vblank +
+					       imx335->cur_mode->height -
+					       IMX335_EXPOSURE_OFFSET,
+					       1, IMX335_EXPOSURE_DEFAULT);
+		if (ret)
+			return ret;
 	}
 
 	/*
@@ -575,6 +577,13 @@  static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
 		return 0;
 
 	switch (ctrl->id) {
+	case V4L2_CID_VBLANK:
+		exposure = imx335->exp_ctrl->val;
+		analog_gain = imx335->again_ctrl->val;
+
+		ret = imx335_update_exp_gain(imx335, exposure, analog_gain);
+
+		break;
 	case V4L2_CID_EXPOSURE:
 		exposure = ctrl->val;
 		analog_gain = imx335->again_ctrl->val;