@@ -52,12 +52,10 @@
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
#include <linux/ieee802154.h>
#include <linux/io.h>
#include <linux/kfifo.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/poll.h>
@@ -350,8 +348,8 @@ struct work_priv_container {
* @extclockenable: true if the external clock is to be enabled
* @extclockfreq: frequency of the external clock
* @extclockgpio: ca8210 output gpio of the external clock
- * @gpio_reset: gpio number of ca8210 reset line
- * @gpio_irq: gpio number of ca8210 interrupt line
+ * @reset_gpio: ca8210 reset GPIO descriptor
+ * @irq_gpio: ca8210 interrupt GPIO descriptor
* @irq_id: identifier for the ca8210 irq
*
*/
@@ -359,8 +357,8 @@ struct ca8210_platform_data {
bool extclockenable;
unsigned int extclockfreq;
unsigned int extclockgpio;
- int gpio_reset;
- int gpio_irq;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *irq_gpio;
int irq_id;
};
@@ -632,10 +630,10 @@ static void ca8210_reset_send(struct spi_device *spi, unsigned int ms)
struct ca8210_priv *priv = spi_get_drvdata(spi);
long status;
- gpio_set_value(pdata->gpio_reset, 0);
+ gpiod_set_value(pdata->reset_gpio, 0);
reinit_completion(&priv->ca8210_is_awake);
msleep(ms);
- gpio_set_value(pdata->gpio_reset, 1);
+ gpiod_set_value(pdata->reset_gpio, 1);
priv->promiscuous = false;
/* Wait until wakeup indication seen */
@@ -2788,24 +2786,14 @@ static int ca8210_reset_init(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct ca8210_platform_data *pdata = dev_get_platdata(dev);
- int ret;
- pdata->gpio_reset = of_get_named_gpio(
- spi->dev.of_node,
- "reset-gpio",
- 0
- );
-
- ret = gpio_direction_output(pdata->gpio_reset, 1);
- if (ret < 0) {
- dev_crit(
- &spi->dev,
- "Reset GPIO %d did not set to output mode\n",
- pdata->gpio_reset
- );
+ pdata->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(pdata->reset_gpio)) {
+ dev_crit(dev, "Reset GPIO did not set to output mode\n");
+ return PTR_ERR(pdata->reset_gpio);
}
- return ret;
+ return 0;
}
/**
@@ -2820,20 +2808,15 @@ static int ca8210_interrupt_init(struct spi_device *spi)
struct ca8210_platform_data *pdata = dev_get_platdata(dev);
int ret;
- pdata->gpio_irq = of_get_named_gpio(
- spi->dev.of_node,
- "irq-gpio",
- 0
- );
+ pdata->irq_gpio = devm_gpiod_get(dev, "irq", GPIOD_IN);
+ if (IS_ERR(pdata->irq_gpio)) {
+ dev_crit(dev, "Could not retrieve IRQ GPIO\n");
+ return PTR_ERR(pdata->irq_gpio);
+ }
- pdata->irq_id = gpio_to_irq(pdata->gpio_irq);
+ pdata->irq_id = gpiod_to_irq(pdata->irq_gpio);
if (pdata->irq_id < 0) {
- dev_crit(
- &spi->dev,
- "Could not get irq for gpio pin %d\n",
- pdata->gpio_irq
- );
- gpio_free(pdata->gpio_irq);
+ dev_crit(dev, "Could not get irq for IRQ GPIO\n");
return pdata->irq_id;
}
@@ -2844,10 +2827,8 @@ static int ca8210_interrupt_init(struct spi_device *spi)
"ca8210-irq",
spi_get_drvdata(spi)
);
- if (ret) {
+ if (ret)
dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
- gpio_free(pdata->gpio_irq);
- }
return ret;
}
This updates the driver to gpiod API, and removes yet another use of of_get_named_gpio(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/net/ieee802154/ca8210.c | 57 +++++++++++---------------------- 1 file changed, 19 insertions(+), 38 deletions(-)