@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/rockchip,rk3528-cru.h>
+#include <dt-bindings/reset/rockchip,rk3528-cru.h>
/ {
compatible = "rockchip,rk3528";
@@ -122,6 +123,16 @@ gic: interrupt-controller@fed01000 {
#interrupt-cells = <3>;
};
+ vpu_grf: syscon@ff340000 {
+ compatible = "rockchip,rk3528-vpu-grf", "syscon";
+ reg = <0x0 0xff340000 0x0 0x8000>;
+ };
+
+ vo_grf: syscon@ff360000 {
+ compatible = "rockchip,rk3528-vo-grf", "syscon";
+ reg = <0x0 0xff360000 0x0 0x10000>;
+ };
+
cru: clock-controller@ff4a0000 {
compatible = "rockchip,rk3528-cru";
reg = <0x0 0xff4a0000 0x0 0x30000>;
@@ -251,5 +262,56 @@ uart7: serial@ffa28000 {
reg-shift = <2>;
status = "disabled";
};
+
+ sdio0: mmc@ffc10000 {
+ compatible = "rockchip,rk3528-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xffc10000 0x0 0x4000>;
+ clocks = <&cru HCLK_SDIO0>,
+ <&cru CCLK_SRC_SDIO0>,
+ <&cru SCLK_SDIO0_DRV>,
+ <&cru SCLK_SDIO0_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_H_SDIO0>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdio1: mmc@ffc20000 {
+ compatible = "rockchip,rk3528-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xffc20000 0x0 0x4000>;
+ clocks = <&cru HCLK_SDIO1>,
+ <&cru CCLK_SRC_SDIO1>,
+ <&cru SCLK_SDIO1_DRV>,
+ <&cru SCLK_SDIO1_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_H_SDIO1>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdmmc: mmc@ffc30000 {
+ compatible = "rockchip,rk3528-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xffc30000 0x0 0x4000>;
+ clocks = <&cru HCLK_SDMMC0>,
+ <&cru CCLK_SRC_SDMMC0>,
+ <&cru SCLK_SDMMC_DRV>,
+ <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_H_SDMMC0>;
+ reset-names = "reset";
+ status = "disabled";
+ };
};
};
RK3528 features two SDIO controllers and one SD/MMC controller, describe them in devicetree. Since their sample and drive clocks are located in the VO and VPU GRFs, corresponding syscons are added to make these clocks available. Signed-off-by: Yao Zi <ziyao@disroot.org> --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 62 ++++++++++++++++++++++++ 1 file changed, 62 insertions(+)