diff mbox series

[v3,5/6] arm64: dts: qcom: qcm2290: add UART3 device

Message ID 20250202-rb1-bt-v3-5-6797a4467ced@linaro.org
State Superseded
Headers show
Series Bluetooth: qca: add Qualcomm WCN3950 BT/WiFi chip support | expand

Commit Message

Dmitry Baryshkov Feb. 2, 2025, 12:16 p.m. UTC 
On QCM2290-based devices the SE3 is used for the Bluetooth chips. Add
corresponding device node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 6e3e57dd02612f3568f07f1e198028413f463c69..30e9bb6c1679aab13c3f3f7f6455f2483b2ba0c5 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1239,6 +1239,21 @@  &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;