@@ -6,6 +6,30 @@
. common/shellcheck
+_have_xfs_io() {
+ if ! _have_program xfs_io; then
+ return 1
+ fi
+ return 0
+}
+
+# Check whether the version of xfs_io is greater than or equal to $1.$2.$3
+
+_have_xfs_io_atomic_write() {
+ local s
+
+ _have_xfs_io || return $?
+
+ # If the pwrite command supports the -A option then this version
+ # of xfs_io supports atomic writes.
+ s=$(xfs_io -c help | grep pwrite | awk '{ print $4}')
+ if [[ $s == *"A"* ]];
+ then
+ return 0
+ fi
+ return 1
+}
+
_have_xfs() {
_have_fs xfs && _have_program mkfs.xfs
}
@@ -52,3 +76,40 @@ _xfs_run_fio_verify_io() {
return "${rc}"
}
+
+# Use xfs_io to perform a non-atomic write using pwritev2().
+# Args: $1 - device to write to
+# $2 - number of bytes to write
+# Returns: Number of bytes written
+run_xfs_io_pwritev2() {
+ local dev=$1
+ local bytes_to_write=$2
+ local bytes_written
+
+ # Perform write and extract out bytes written from xfs_io output
+ bytes_written=$(xfs_io -d -C "pwrite -b ${bytes_to_write} -V 1 -D 0 ${bytes_to_write}" "$dev" | grep "wrote" | sed 's/\// /g' | awk '{ print $2 }')
+ echo "$bytes_written"
+}
+
+# Use xfs_io to perform an atomic write using pwritev2().
+# Args: $1 - device to write to
+# $2 - number of bytes to write
+# Returns: Number of bytes written
+run_xfs_io_pwritev2_atomic() {
+ local dev=$1
+ local bytes_to_write=$2
+ local bytes_written
+
+ # Perform atomic write and extract out bytes written from xfs_io output
+ bytes_written=$(xfs_io -d -C "pwrite -b ${bytes_to_write} -V 1 -A -D 0 ${bytes_to_write}" "$dev" | grep "wrote" | sed 's/\// /g' | awk '{ print $2 }')
+ echo "$bytes_written"
+}
+
+run_xfs_io_xstat() {
+ local dev=$1
+ local field=$2
+ local statx_output
+
+ statx_output=$(xfs_io -c "statx -r -m 0x00010000" "$dev" | grep "$field" | awk '{ print $3 }')
+ echo "$statx_output"
+}
new file mode 100755
@@ -0,0 +1,233 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-3.0+
+# Copyright (C) 2025 Oracle and/or its affiliates
+#
+# Test SCSI Atomic Writes with scsi_debug
+
+. tests/scsi/rc
+. common/scsi_debug
+. common/xfs
+
+DESCRIPTION="test scsi atomic writes"
+QUICK=1
+
+requires() {
+ _have_driver scsi_debug
+ _have_xfs_io_atomic_write
+}
+
+device_requires() {
+ _require_test_dev_sysfs queue/atomic_write_max_bytes
+ if (( $(< "${TEST_DEV_SYSFS}"/queue/atomic_write_max_bytes) == 0 )); then
+ SKIP_REASONS+=("${TEST_DEV} does not support atomic write")
+ return 1
+ fi
+}
+
+fallback_device() {
+ local scsi_debug_params=(
+ delay=0
+ atomic_wr=1
+ )
+ if ! _configure_scsi_debug "${scsi_debug_params[@]}"; then
+ return 1
+ fi
+ echo "/dev/${SCSI_DEBUG_DEVICES[0]}"
+}
+
+cleanup_fallback_device() {
+ _exit_scsi_debug
+}
+
+test_device() {
+ local scsi_debug_atomic_wr_max_length
+ local scsi_debug_atomic_wr_gran
+ local scsi_atomic_max_bytes
+ local scsi_atomic_min_bytes
+ local sysfs_max_hw_sectors_kb
+ local max_hw_bytes
+ local sysfs_logical_block_size
+ local sysfs_atomic_max_bytes
+ local sysfs_atomic_unit_max_bytes
+ local sysfs_atomic_unit_min_bytes
+ local statx_atomic_min
+ local statx_atomic_max
+ local bytes_to_write
+ local bytes_written
+ local test_desc
+
+ echo "Running ${TEST_NAME}"
+
+ sysfs_logical_block_size=$(< "${TEST_DEV_SYSFS}"/queue/logical_block_size)
+ sysfs_max_hw_sectors_kb=$(< "${TEST_DEV_SYSFS}"/queue/max_hw_sectors_kb)
+ max_hw_bytes=$(( "$sysfs_max_hw_sectors_kb" * 1024 ))
+ sysfs_atomic_max_bytes=$(< "${TEST_DEV_SYSFS}"/queue/atomic_write_max_bytes)
+ sysfs_atomic_unit_max_bytes=$(< "${TEST_DEV_SYSFS}"/queue/atomic_write_unit_max_bytes)
+ sysfs_atomic_unit_min_bytes=$(< "${TEST_DEV_SYSFS}"/queue/atomic_write_unit_min_bytes)
+ scsi_debug_atomic_wr_max_length=$(< /sys/module/scsi_debug/parameters/atomic_wr_max_length)
+ scsi_debug_atomic_wr_gran=$(< /sys/module/scsi_debug/parameters/atomic_wr_gran)
+ scsi_atomic_max_bytes=$(( "$scsi_debug_atomic_wr_max_length" * "$sysfs_logical_block_size" ))
+ scsi_atomic_min_bytes=$(( "$scsi_debug_atomic_wr_gran" * "$sysfs_logical_block_size" ))
+
+ test_desc="TEST 1 - Verify sysfs atomic attributes"
+ if [ "$max_hw_bytes" -ge "$sysfs_atomic_max_bytes" ] &&
+ [ "$sysfs_atomic_max_bytes" -ge "$sysfs_atomic_unit_max_bytes" ] &&
+ [ "$sysfs_atomic_unit_max_bytes" -ge "$sysfs_atomic_unit_min_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $max_hw_bytes - $sysfs_max_hw_sectors_kb -" \
+ "$sysfs_atomic_max_bytes - $sysfs_atomic_unit_max_bytes -" \
+ "$sysfs_atomic_unit_min_bytes"
+ fi
+
+ test_desc="TEST 2 - check scsi_debug atomic_wr_max_length is the same as sysfs atomic_write_max_bytes"
+ if [ "$scsi_atomic_max_bytes" -le "$max_hw_bytes" ]
+ then
+ if [ "$scsi_atomic_max_bytes" = "$sysfs_atomic_max_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $scsi_atomic_max_bytes - $max_hw_bytes -" \
+ "$sysfs_atomic_max_bytes"
+ fi
+ else
+ if [ "$sysfs_atomic_max_bytes" = "$max_hw_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $scsi_atomic_max_bytes - $max_hw_bytes -" \
+ "$sysfs_atomic_max_bytes"
+ fi
+ fi
+
+ test_desc="TEST 3 - check sysfs atomic_write_unit_max_bytes <= scsi_debug atomic_wr_max_length"
+ if (("$sysfs_atomic_unit_max_bytes" <= "$scsi_atomic_max_bytes"))
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $sysfs_atomic_unit_max_bytes - $scsi_atomic_max_bytes"
+ fi
+
+ test_desc="TEST 4 - check sysfs atomic_write_unit_min_bytes = scsi_debug atomic_wr_gran"
+ if [ "$sysfs_atomic_unit_min_bytes" = "$scsi_atomic_min_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $sysfs_atomic_unit_min_bytes - $scsi_atomic_min_bytes"
+ fi
+
+ test_desc="TEST 5 - check statx stx_atomic_write_unit_min"
+ statx_atomic_min=$(run_xfs_io_xstat "$TEST_DEV" "stat.atomic_write_unit_min")
+ if [ "$statx_atomic_min" = "$scsi_atomic_min_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $statx_atomic_min - $scsi_atomic_min_bytes"
+ fi
+
+ test_desc="TEST 6 - check statx stx_atomic_write_unit_max"
+ statx_atomic_max=$(run_xfs_io_xstat "$TEST_DEV" "stat.atomic_write_unit_max")
+ if [ "$statx_atomic_max" = "$sysfs_atomic_unit_max_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $statx_atomic_max - $sysfs_atomic_unit_max_bytes"
+ fi
+
+ test_desc="TEST 7 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes "
+ test_desc+="with no RWF_ATOMIC flag - pwritev2 should be succesful"
+ bytes_written=$(run_xfs_io_pwritev2 "$TEST_DEV" "$sysfs_atomic_unit_max_bytes")
+ if [ "$bytes_written" = "$sysfs_atomic_unit_max_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "test_desc - fail $bytes_written - $sysfs_atomic_unit_max_bytes"
+ fi
+
+ test_desc="TEST 8 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes with "
+ test_desc+="RWF_ATOMIC flag - pwritev2 should be succesful"
+ bytes_written=$(run_xfs_io_pwritev2_atomic "$TEST_DEV" "$sysfs_atomic_unit_max_bytes")
+ if [ "$bytes_written" = "$sysfs_atomic_unit_max_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $sysfs_atomic_unit_max_bytes"
+ fi
+
+ test_desc="TEST 9 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes + 512 "
+ test_desc+="bytes with no RWF_ATOMIC flag - pwritev2 should be succesful"
+ bytes_to_write=$(( "${sysfs_atomic_unit_max_bytes}" + "$sysfs_logical_block_size" ))
+ bytes_written=$(run_xfs_io_pwritev2 "$TEST_DEV" "$bytes_to_write")
+ if [ "$bytes_written" = "$bytes_to_write" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $bytes_to_write"
+ fi
+
+ test_desc="TEST 10 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes + 512 "
+ test_desc+="bytes with RWF_ATOMIC flag - pwritev2 should not be succesful"
+ bytes_written=$(run_xfs_io_pwritev2_atomic "$TEST_DEV" "$bytes_to_write")
+ if [ "$bytes_written" = "" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $bytes_to_write"
+ fi
+
+ test_desc="TEST 11 - perform a pwritev2 with size of sysfs_atomic_unit_min_bytes "
+ test_desc+="with no RWF_ATOMIC flag - pwritev2 should be succesful"
+ bytes_written=$(run_xfs_io_pwritev2 "$TEST_DEV" "$sysfs_atomic_unit_min_bytes")
+ if [ "$bytes_written" = "$sysfs_atomic_unit_min_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $scsi_atomic_min_bytes"
+ fi
+
+ test_desc="TEST 12 - perform a pwritev2 with size of sysfs_atomic_unit_min_bytes "
+ test_desc+="with RWF_ATOMIC flag - pwritev2 should be succesful"
+ bytes_written=$(run_xfs_io_pwritev2_atomic "$TEST_DEV" "$sysfs_atomic_unit_min_bytes")
+ if [ "$bytes_written" = "$sysfs_atomic_unit_min_bytes" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $scsi_atomic_min_bytes"
+ fi
+
+ test_desc="TEST 13 - perform a pwritev2 with a size of sysfs_atomic_unit_min_bytes - 512 "
+ test_desc+="bytes with no RWF_ATOMIC flag - pwritev2 should be succesful"
+ bytes_to_write=$(( "${sysfs_atomic_unit_min_bytes}" - "${sysfs_logical_block_size}" ))
+ if [ "$bytes_to_write" = 0 ]
+ then
+ echo "$test_desc - pass"
+ echo "pwrite: Invalid argument"
+ else
+ bytes_written=$(run_xfs_io_pwritev2 "$TEST_DEV" "$bytes_to_write")
+ if [ "$bytes_written" = "$bytes_to_write" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $bytes_to_write"
+ fi
+ fi
+ test_desc="TEST 14 - perform a pwritev2 with a size of sysfs_atomic_unit_min_bytes - 512 "
+ test_desc+="bytes with RWF_ATOMIC flag - pwritev2 should fail"
+ if [ "$bytes_to_write" = 0 ]
+ then
+ echo "$test_desc - pass"
+ else
+ bytes_written=$(run_xfs_io_pwritev2_atomic "$TEST_DEV" "$bytes_to_write")
+ if [ "$bytes_written" = "" ]
+ then
+ echo "$test_desc - pass"
+ else
+ echo "$test_desc - fail $bytes_written - $bytes_to_write"
+ fi
+ fi
+
+ _exit_scsi_debug
+
+ echo "Test complete"
+}
new file mode 100644
@@ -0,0 +1,18 @@
+Running scsi/009
+TEST 1 - Verify sysfs atomic attributes - pass
+TEST 2 - check scsi_debug atomic_wr_max_length is the same as sysfs atomic_write_max_bytes - pass
+TEST 3 - check sysfs atomic_write_unit_max_bytes <= scsi_debug atomic_wr_max_length - pass
+TEST 4 - check sysfs atomic_write_unit_min_bytes = scsi_debug atomic_wr_gran - pass
+TEST 5 - check statx stx_atomic_write_unit_min - pass
+TEST 6 - check statx stx_atomic_write_unit_max - pass
+TEST 7 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes with no RWF_ATOMIC flag - pwritev2 should be succesful - pass
+TEST 8 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes with RWF_ATOMIC flag - pwritev2 should be succesful - pass
+TEST 9 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes + 512 bytes with no RWF_ATOMIC flag - pwritev2 should be succesful - pass
+pwrite: Invalid argument
+TEST 10 - perform a pwritev2 with size of sysfs_atomic_unit_max_bytes + 512 bytes with RWF_ATOMIC flag - pwritev2 should not be succesful - pass
+TEST 11 - perform a pwritev2 with size of sysfs_atomic_unit_min_bytes with no RWF_ATOMIC flag - pwritev2 should be succesful - pass
+TEST 12 - perform a pwritev2 with size of sysfs_atomic_unit_min_bytes with RWF_ATOMIC flag - pwritev2 should be succesful - pass
+TEST 13 - perform a pwritev2 with a size of sysfs_atomic_unit_min_bytes - 512 bytes with no RWF_ATOMIC flag - pwritev2 should be succesful - pass
+pwrite: Invalid argument
+TEST 14 - perform a pwritev2 with a size of sysfs_atomic_unit_min_bytes - 512 bytes with RWF_ATOMIC flag - pwritev2 should fail - pass
+Test complete
Tests basic atomic write functionality. If no scsi test device is provided, a scsi_debug device will be used. Testing areas include: - Verify sysfs atomic write attributes are consistent with atomic write attributes advertised by scsi_debug. - Verify the atomic write paramters of statx are correct using xfs_io. - Perform a pwritev2() (with and without RWF_ATOMIC flag) using xfs_io: - maximum byte size (atomic_write_unit_max_bytes) - minimum byte size (atomic_write_unit_min_bytes) - a write larger than atomic_write_unit_max_bytes - a write smaller than atomic_write_unit_min_bytes Signed-off-by: Alan Adamson <alan.adamson@oracle.com> --- common/xfs | 61 ++++++++++++ tests/scsi/009 | 233 +++++++++++++++++++++++++++++++++++++++++++++ tests/scsi/009.out | 18 ++++ 3 files changed, 312 insertions(+) create mode 100755 tests/scsi/009 create mode 100644 tests/scsi/009.out