diff mbox series

[RFC/HELP] add support for POWER-A/THQ BDA NSW Nintendo Controller

Message ID fbjhelddqwf6yenezqqndihm7sebehpg4cubdwktxyw2nnirrs@2yz7fahu6nr6
State New
Headers show
Series [RFC/HELP] add support for POWER-A/THQ BDA NSW Nintendo Controller | expand

Commit Message

Ethan Carter Edwards Jan. 28, 2025, 3:28 a.m. UTC 
Hello all,

I have an unofficial USB Nintendo Switch Pro controller that I have had
for a few years and want to try to use on Linux. For reference, the
vendor id and device ids are as follows:

Vendor: 20d6
Device: 0002

I tried adding the device to the hid-nintendo module to add support but
that did not work (see below for code). I recieved a few errors from dmesg

nintendo 0003:20D6:0002.0011: Failed to get joycon info; ret=-110
nintendo 0003:20D6:0002.0011: Failed to retrieve controller info; ret=-110
nintendo 0003:20D6:0002.0011: Failed to initialize controller; ret=-110
nintendo 0003:20D6:0002.0011: probe - fail = -110
nintendo 0003:20D6:0002.0011: probe with driver nintendo failed with error -110

I understand that -110 is a timeout. But I don't understand much else.

And I am not sure where to go from here. Any suggestions?

Thanks,
Ethan

---
 drivers/hid/hid-ids.h      | 1 +
 drivers/hid/hid-nintendo.c | 2 ++
 2 files changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index c448de53bf91..693e6f584c8a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1289,6 +1289,7 @@ 
 #define USB_DEVICE_ID_BLINK1		0x01ed
 
 #define USB_VENDOR_ID_THQ		0x20d6
+#define USB_DEVICE_ID_THQ_BDA_NSW	0x0002
 #define USB_DEVICE_ID_THQ_PS3_UDRAW	0xcb17
 
 #define USB_VENDOR_ID_THRUSTMASTER	0x044f
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 11ac246176ae..54f1b49849c0 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2783,6 +2783,8 @@  static const struct hid_device_id nintendo_hid_devices[] = {
 			 USB_DEVICE_ID_NINTENDO_GENCON) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
 			 USB_DEVICE_ID_NINTENDO_N64CON) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THQ,
+			 USB_DEVICE_ID_THQ_BDA_NSW) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, nintendo_hid_devices);