| Message ID | 20250124151746.1130-2-cedricjustine.encarnacion@analog.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for ADP1051/ADP1055 and LTP8800-1A/-2/-4A | expand |
On Fri, Jan 24, 2025 at 11:17:44PM +0800, Cedric Encarnacion wrote: > Add support for adp1051, adp1055, and ltp8800. > ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature > ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature > LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator > > Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> > Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> > Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> > --- > .../bindings/hwmon/pmbus/adi,adp1050.yaml | 15 +++++++++++++-- > 1 file changed, 13 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml > index 10c2204bc3df..af7530093942 100644 > --- a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml > +++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml > @@ -10,16 +10,27 @@ maintainers: > - Radu Sabau <radu.sabau@analog.com> > > description: | > - The ADP1050 is used to monitor system voltages, currents and temperatures. > + The ADP1050 and similar devices are used to monitor system voltages, > + currents, power, and temperatures. > + > Through the PMBus interface, the ADP1050 targets isolated power supplies > and has four individual monitors for input/output voltage, input current > and temperature. > Datasheet: > https://www.analog.com/en/products/adp1050.html > + https://www.analog.com/en/products/adp1051.html > + https://www.analog.com/en/products/adp1055.html > + https://www.analog.com/en/products/ltp8800-1a.html > + https://www.analog.com/en/products/ltp8800-2.html > + https://www.analog.com/en/products/ltp8800-4a.html > > properties: > compatible: > - const: adi,adp1050 > + enum: > + - adi,adp1050 > + - adi,adp1051 > + - adi,adp1055 > + - adi,ltp8800 > > reg: > maxItems: 1 > -- > 2.39.5 >
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml index 10c2204bc3df..af7530093942 100644 --- a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml +++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml @@ -10,16 +10,27 @@ maintainers: - Radu Sabau <radu.sabau@analog.com> description: | - The ADP1050 is used to monitor system voltages, currents and temperatures. + The ADP1050 and similar devices are used to monitor system voltages, + currents, power, and temperatures. + Through the PMBus interface, the ADP1050 targets isolated power supplies and has four individual monitors for input/output voltage, input current and temperature. Datasheet: https://www.analog.com/en/products/adp1050.html + https://www.analog.com/en/products/adp1051.html + https://www.analog.com/en/products/adp1055.html + https://www.analog.com/en/products/ltp8800-1a.html + https://www.analog.com/en/products/ltp8800-2.html + https://www.analog.com/en/products/ltp8800-4a.html properties: compatible: - const: adi,adp1050 + enum: + - adi,adp1050 + - adi,adp1051 + - adi,adp1055 + - adi,ltp8800 reg: maxItems: 1
Add support for adp1051, adp1055, and ltp8800. ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com> --- .../bindings/hwmon/pmbus/adi,adp1050.yaml | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)