diff mbox series

[8/8] ARM: dts: msm: Use Operation Points V2 for UFS on SM8650

Message ID 20250116091150.1167739-9-quic_ziqichen@quicinc.com
State New
Headers show
Series None | expand

Commit Message

Ziqi Chen Jan. 16, 2025, 9:11 a.m. UTC 
Use Operation Points V2 for UFS on SM8650 so that multi-level
clock/gear scaling can be possible.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 51 +++++++++++++++++++++++-----
 1 file changed, 43 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 01ac3769ffa6..5466f1217f64 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2557,18 +2557,11 @@  ufs_mem_hc: ufs@1d84000 {
 				      "tx_lane0_sync_clk",
 				      "rx_lane0_sync_clk",
 				      "rx_lane1_sync_clk";
-			freq-table-hz = <100000000 403000000>,
-					<0 0>,
-					<0 0>,
-					<100000000 403000000>,
-					<100000000 403000000>,
-					<0 0>,
-					<0 0>,
-					<0 0>;
 
 			resets = <&gcc GCC_UFS_PHY_BCR>;
 			reset-names = "rst";
 
+			operating-points-v2 = <&ufs_opp_table>;
 			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2590,6 +2583,48 @@  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			#reset-cells = <1>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+					   compatible = "operating-points-v2";
+					   // LOW_SVS
+					   opp-100000000 {
+							   opp-hz = /bits/ 64 <100000000>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <100000000>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>;
+							   required-opps = <&rpmhpd_opp_low_svs>;
+					   };
+
+					   // SVS
+					   opp-201500000 {
+							   opp-hz = /bits/ 64 <201500000>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <201500000>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>;
+							   required-opps = <&rpmhpd_opp_svs>;
+					   };
+
+					   // NOM/TURBO
+					   opp-403000000 {
+							   opp-hz = /bits/ 64 <403000000>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <403000000>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>,
+									   /bits/ 64 <0>;
+							   required-opps = <&rpmhpd_opp_nom>;
+					   };
+			   };
 		};
 
 		ice: crypto@1d88000 {