@@ -53,6 +53,14 @@ static const int isa_serial_irq[MAX_ISA_SERIAL_PORTS] = {
4, 3, 4, 3
};
+static void serial_isa_reset_hold(Object *obj, ResetType type)
+{
+ ISASerialState *isa = ISA_SERIAL(obj);
+ SerialState *s = &isa->state;
+
+ device_cold_reset(DEVICE(s));
+}
+
static void serial_isa_realizefn(DeviceState *dev, Error **errp)
{
static int index;
@@ -123,11 +131,13 @@ static void serial_isa_class_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
dc->realize = serial_isa_realizefn;
dc->vmsd = &vmstate_isa_serial;
adevc->build_dev_aml = serial_isa_build_aml;
device_class_set_props(dc, serial_isa_properties);
+ rc->phases.hold = serial_isa_reset_hold;
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
}
@@ -29,6 +29,7 @@
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "hw/qdev-properties.h"
+#include "system/reset.h"
static uint64_t serial_mm_read(void *opaque, hwaddr addr, unsigned size)
{
@@ -82,6 +83,16 @@ static void serial_mm_realize(DeviceState *dev, Error **errp)
8 << smm->regshift);
sysbus_init_mmio(SYS_BUS_DEVICE(smm), &s->io);
sysbus_init_irq(SYS_BUS_DEVICE(smm), &smm->serial.irq);
+
+ /*
+ * Because this Device is not on any bus in the qbus tree (it is
+ * not a sysbus device and it's not on some other bus like a PCI
+ * bus) it will not be automatically reset by the 'reset the
+ * sysbus' hook registered by vl.c like most devices. So we must
+ * manually register a reset hook for it.
+ * TODO: there should be a better way to do this.
+ */
+ qemu_register_reset(resettable_cold_reset_fn, DEVICE(s));
}
static const VMStateDescription vmstate_serial_mm = {
@@ -90,6 +90,19 @@ static size_t multi_serial_get_port_count(PCIDeviceClass *pc)
g_assert_not_reached();
}
+static void multi_serial_pci_reset_hold(Object *obj, ResetType type)
+{
+ PCIDevice *dev = PCI_DEVICE(obj);
+ PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
+ PCIMultiSerialState *pci = DO_UPCAST(PCIMultiSerialState, dev, dev);
+ size_t nports = multi_serial_get_port_count(pc);
+
+ for (size_t i = 0; i < nports; i++) {
+ SerialState *s = &pci->state[i];
+
+ device_cold_reset(DEVICE(s));
+ }
+}
static void multi_serial_pci_realize(PCIDevice *dev, Error **errp)
{
@@ -150,6 +163,8 @@ static void multi_2x_serial_pci_class_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
pc->realize = multi_serial_pci_realize;
pc->exit = multi_serial_pci_exit;
pc->vendor_id = PCI_VENDOR_ID_REDHAT;
@@ -159,12 +174,15 @@ static void multi_2x_serial_pci_class_initfn(ObjectClass *klass, void *data)
dc->vmsd = &vmstate_pci_multi_serial;
device_class_set_props(dc, multi_2x_serial_pci_properties);
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+ rc->phases.hold = multi_serial_pci_reset_hold;
}
static void multi_4x_serial_pci_class_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
pc->realize = multi_serial_pci_realize;
pc->exit = multi_serial_pci_exit;
pc->vendor_id = PCI_VENDOR_ID_REDHAT;
@@ -174,6 +192,7 @@ static void multi_4x_serial_pci_class_initfn(ObjectClass *klass, void *data)
dc->vmsd = &vmstate_pci_multi_serial;
device_class_set_props(dc, multi_4x_serial_pci_properties);
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+ rc->phases.hold = multi_serial_pci_reset_hold;
}
static void multi_serial_init(Object *o)
@@ -44,6 +44,15 @@ struct PCISerialState {
#define TYPE_PCI_SERIAL "pci-serial"
OBJECT_DECLARE_SIMPLE_TYPE(PCISerialState, PCI_SERIAL)
+static void serial_pci_reset_hold(Object *obj, ResetType type)
+{
+ PCIDevice *dev = PCI_DEVICE(obj);
+ PCISerialState *pci = DO_UPCAST(PCISerialState, dev, dev);
+ SerialState *s = &pci->state;
+
+ device_cold_reset(DEVICE(s));
+}
+
static void serial_pci_realize(PCIDevice *dev, Error **errp)
{
PCISerialState *pci = DO_UPCAST(PCISerialState, dev, dev);
@@ -89,6 +98,8 @@ static void serial_pci_class_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
pc->realize = serial_pci_realize;
pc->exit = serial_pci_exit;
pc->vendor_id = PCI_VENDOR_ID_REDHAT;
@@ -98,6 +109,7 @@ static void serial_pci_class_initfn(ObjectClass *klass, void *data)
dc->vmsd = &vmstate_pci_serial;
device_class_set_props(dc, serial_pci_properties);
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+ rc->phases.hold = serial_pci_reset_hold;
}
static void serial_pci_init(Object *o)
@@ -851,9 +851,9 @@ const VMStateDescription vmstate_serial = {
}
};
-static void serial_reset(void *opaque)
+static void serial_reset_hold(Object *obj, ResetType type)
{
- SerialState *s = opaque;
+ SerialState *s = (SerialState *)obj;
if (s->watch_tag > 0) {
g_source_remove(s->watch_tag);
@@ -928,13 +928,11 @@ static void serial_realize(DeviceState *dev, Error **errp)
s->modem_status_poll = timer_new_ns(QEMU_CLOCK_VIRTUAL, (QEMUTimerCB *) serial_update_msl, s);
s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, (QEMUTimerCB *) fifo_timeout_int, s);
- qemu_register_reset(serial_reset, s);
qemu_chr_fe_set_handlers(&s->chr, serial_can_receive1, serial_receive1,
serial_event, serial_be_change, s, NULL, true);
fifo8_create(&s->recv_fifo, UART_FIFO_LENGTH);
fifo8_create(&s->xmit_fifo, UART_FIFO_LENGTH);
- serial_reset(s);
}
static void serial_unrealize(DeviceState *dev)
@@ -949,8 +947,6 @@ static void serial_unrealize(DeviceState *dev)
fifo8_destroy(&s->recv_fifo);
fifo8_destroy(&s->xmit_fifo);
-
- qemu_unregister_reset(serial_reset, s);
}
const MemoryRegionOps serial_io_ops = {
@@ -975,12 +971,14 @@ static const Property serial_properties[] = {
static void serial_class_init(ObjectClass *klass, void* data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
/* internal device for serialio/serialmm, not user-creatable */
dc->user_creatable = false;
dc->realize = serial_realize;
dc->unrealize = serial_unrealize;
device_class_set_props(dc, serial_properties);
+ rc->phases.hold = serial_reset_hold;
}
static const TypeInfo serial_info = {
Convert the TYPE_SERIAL (16550A UART) based devices to three-phase reset. Only local states are reset so use the ResetHold handler, like other legacy devices. TYPE_SERIAL is a plain QDev object: - Implement and register ResetHold - Remove call to serial_reset() in DeviceRealize - Remove qemu_[un]register_reset() calls For TYPE_ISA_SERIAL, TYPE_PCI_SERIAL (single and multi): - Implement and register ResetHold - Call device_cold_reset(TYPE_SERIAL) in ResetHold For TYPE_SERIAL_MM, since it is not on a QBus, we register a global reset hook to reset the embedded TYPE_SERIAL (see commits surrounding 751b4b7b4b7). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/char/serial-isa.c | 10 ++++++++++ hw/char/serial-mm.c | 11 +++++++++++ hw/char/serial-pci-multi.c | 19 +++++++++++++++++++ hw/char/serial-pci.c | 12 ++++++++++++ hw/char/serial.c | 10 ++++------ 5 files changed, 56 insertions(+), 6 deletions(-)