| Message ID | csxkrj4qclw3yzijwr57zqqd737kk47zpwjvy6t2oxnobmvswp@o5gt4k7vtwql |
|---|---|
| State | New |
| Headers | show |
| Series | USB: serial: option: add Neoway N723-EA support | expand |
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 64317b390d22..758f02f0d2b9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2412,6 +2412,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(1) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0640, 0xff), /* TCL IK512 ECM */ .driver_info = NCTRL(3) }, + { USB_DEVICE(0x2949, 0x8700) }, /* Neoway N723-EA */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids);
Update the USB serial option driver to support Neoway N723-EA. ID 2949:8700 Marvell Mobile Composite Device Bus T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2949 ProdID=8700 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=200806006809080000 C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested successfully connecting to the Internet via rndis interface after dialing via AT commands on If#=4 or If#=6. Not sure of the purpose of the other serial interface. Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+)