diff mbox series

[5/5] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable camera EEPROMs

Message ID 20250103-fp5-cam-eeprom-v1-5-88dee1b36f8e@fairphone.com
State New
Headers show
Series [1/5] dt-bindings: eeprom: at24: Add compatible for Giantec GT24P128F | expand

Commit Message

Luca Weiss Jan. 3, 2025, 11:12 a.m. UTC 
Configure the EEPROMs which are found on the different camera sensors on
this device.

The pull-up regulator for these I2C busses is vreg_l6p, the same supply
that powers VCC of all the EEPROMs.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index cc1f89a4015218b0ea06811d2acd4ec56078961e..769c66cb5d19dbf50e137b3a72de2e36ec4daecf 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -556,6 +556,47 @@  vreg_bob: bob {
 	};
 };
 
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX800 @ 1a */
+
+	eeprom@50 {
+		compatible = "puya,p24c256c", "atmel,24c256";
+		reg = <0x50>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
+&cci0_i2c1 {
+	/* IMX858 @ 29 */
+
+	eeprom@54 {
+		compatible = "giantec,gt24p128f", "atmel,24c128";
+		reg = <0x54>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	/* S5KJN1SQ03 @ 10 */
+
+	eeprom@51 {
+		compatible = "giantec,gt24p128f", "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
 &dispcc {
 	/* Disable for now so simple-framebuffer continues working */
 	status = "disabled";