diff mbox series

[v2,4/6] dt-bindings: watchdog: renesas: Document `renesas,syscon-cpg-error-rst` property

Message ID 20241227190210.69025-5-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC | expand

Commit Message

Prabhakar Dec. 27, 2024, 7:02 p.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The RZ/V2H(P) CPG block includes Error Reset Registers (CPG_ERROR_RSTm).
A system reset is triggered in response to error interrupt factors, and
the corresponding bit is set in the CPG_ERROR_RSTm register. These
registers can be utilized by various IP blocks as needed.

In the event of a watchdog overflow or underflow, a system reset is issued,
and the CPG_ERROR_RST2[0/1/2/3] bits are set depending on the watchdog in
use: CM33 = 0, CA55 = 1, CR8_0 = 2, CR8_1 = 3. For the watchdog driver to
determine and report the current boot status, it needs to read the
CPG_ERROR_RST2[0/1/2/3]bits and provide this information to the user upon
request.

To facilitate this operation, add `renesas,syscon-cpg-error-rst`
property to the WDT node, which maps to the `syscon` CPG node, enabling
retrieval of the necessary information.

Additionally, the property is marked as required for the RZ/V2H(P) SoC to
ensure future compatibility (e.g., where the same IP block is present on
the RZ/G3E SoC) and explicitly disallowed for other SoCs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
- Renamed `renesas,r9a09g057-syscon-wdt-errorrst` to `renesas,syscon-cpg-error-rst`
- Updated commit message
---
 .../bindings/watchdog/renesas,wdt.yaml          | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
index 29ada89fdcdc..ca62ae8b1b0c 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -112,6 +112,19 @@  properties:
 
   timeout-sec: true
 
+  renesas,syscon-cpg-error-rst:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The first cell is a phandle to the SYSCON entry required to obtain
+      the current boot status. The second cell specifies the CPG_ERROR_RSTm
+      register offset within the SYSCON, and the third cell indicates the
+      bit within the CPG_ERROR_RSTm register.
+    items:
+      - items:
+          - description: Phandle to the CPG node
+          - description: The CPG_ERROR_RSTm register offset
+          - description: The bit within CPG_ERROR_RSTm register of interest
+
 required:
   - compatible
   - reg
@@ -182,7 +195,11 @@  allOf:
       properties:
         interrupts: false
         interrupt-names: false
+      required:
+        - renesas,syscon-cpg-error-rst
     else:
+      properties:
+        renesas,syscon-cpg-error-rst: false
       required:
         - interrupts