diff mbox series

[1/4] firmware: arm_scmi: bus: Bypass setting fwnode for scmi cpufreq

Message ID 20241225-scmi-fwdevlink-v1-1-e9a3a5341362@nxp.com
State New
Headers show
Series scmi: Bypass set fwnode to address devlink issue | expand

Commit Message

Peng Fan (OSS) Dec. 25, 2024, 8:20 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Two drivers scmi_cpufreq.c and scmi_perf_domain.c both use
SCMI_PROTCOL_PERF protocol, but with different name, so two scmi devices
will be created. But the fwnode->dev could only point to one device.

If scmi cpufreq device created earlier, the fwnode->dev will point to
the scmi cpufreq device. Then the fw_devlink will link performance
domain user device(consumer) to the scmi cpufreq device(supplier).
But actually the performance domain user device, such as GPU, should use
the scmi perf device as supplier. Also if 'cpufreq.off=1' in bootargs,
the GPU driver will defer probe always, because of the scmi cpufreq
device not ready.

Because for cpufreq, no need use fw_devlink. So bypass setting fwnode
for scmi cpufreq device.

Fixes: 96da4a99ce50 ("firmware: arm_scmi: Set fwnode for the scmi_device")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/firmware/arm_scmi/bus.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index 157172a5f2b577ce4f04425f967f548230c1ebed..12190d4dabb65484543044b4424fbe3b67245466 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -345,6 +345,19 @@  static void __scmi_device_destroy(struct scmi_device *scmi_dev)
 	device_unregister(&scmi_dev->dev);
 }
 
+static int
+__scmi_device_set_node(struct scmi_device *scmi_dev, struct device_node *np,
+		       int protocol, const char *name)
+{
+	/* cpufreq device does not need to be supplier from devlink perspective */
+	if ((protocol == SCMI_PROTOCOL_PERF) && !strcmp(name, "cpufreq"))
+		return 0;
+
+	device_set_node(&scmi_dev->dev, of_fwnode_handle(np));
+
+	return 0;
+}
+
 static struct scmi_device *
 __scmi_device_create(struct device_node *np, struct device *parent,
 		     int protocol, const char *name)
@@ -397,7 +410,7 @@  __scmi_device_create(struct device_node *np, struct device *parent,
 	scmi_dev->id = id;
 	scmi_dev->protocol_id = protocol;
 	scmi_dev->dev.parent = parent;
-	device_set_node(&scmi_dev->dev, of_fwnode_handle(np));
+	__scmi_device_set_node(scmi_dev, np, protocol, name);
 	scmi_dev->dev.bus = &scmi_bus_type;
 	scmi_dev->dev.release = scmi_device_release;
 	dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id);