@@ -2414,5 +2414,17 @@ config MFD_RSMU_SPI
Additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX7360
+ tristate "Maxim MAX7360 Support"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Say yes here to add support for Maxim MAX7360.
+ This driver provides common support for accessing
+ the device; additional drivers must be enabled in
+ order to use the functionality of the device.
+
endmenu
endif
@@ -163,6 +163,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
+obj-$(CONFIG_MFD_MAX7360) += max7360.o
obj-$(CONFIG_MFD_MAX77541) += max77541.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77650) += max77650.o
new file mode 100644
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Maxim MAX7360 Core Driver
+ *
+ * Copyright (C) 2024 Kamel Bouhara
+ * Author: Kamel Bouhara <kamel.bouhara@bootlin.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+static DEFINE_SPINLOCK(request_lock);
+
+struct max7360_mfd {
+ struct regmap *regmap;
+ unsigned int requested_ports;
+ struct device *dev;
+};
+
+#define GPO_COMPATIBLE "maxim,max7360-gpo"
+#define GPIO_COMPATIBLE "maxim,max7360-gpio"
+
+static const struct mfd_cell max7360_cells[] = {
+ {
+ .name = MAX7360_DRVNAME_PWM,
+ },
+ {
+ .name = MAX7360_DRVNAME_GPO,
+ .of_compatible = GPO_COMPATIBLE,
+ },
+ {
+ .name = MAX7360_DRVNAME_GPIO,
+ .of_compatible = GPIO_COMPATIBLE,
+ },
+ {
+ .name = MAX7360_DRVNAME_KEYPAD,
+ },
+ {
+ .name = MAX7360_DRVNAME_ROTARY,
+ },
+};
+
+static const struct regmap_range max7360_volatile_ranges[] = {
+ {
+ .range_min = MAX7360_REG_KEYFIFO,
+ .range_max = MAX7360_REG_KEYFIFO,
+ }, {
+ .range_min = 0x48,
+ .range_max = 0x4a,
+ },
+};
+
+static const struct regmap_access_table max7360_volatile_table = {
+ .yes_ranges = max7360_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
+};
+
+static const struct regmap_config max7360_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+ .volatile_table = &max7360_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int max7360_set_gpos_count(struct max7360_mfd *max7360_mfd)
+{
+ /*
+ * Max7360 COL0 to COL7 pins can be used either as keypad columns,
+ * general purpose output or a mix of both.
+ * Get the number of pins requested by the corresponding drivers, ensure
+ * they are compatible with each others and apply the corresponding
+ * configuration.
+ */
+ struct device_node *np;
+ u32 gpos = 0;
+ u32 columns = 0;
+ unsigned int val;
+ int ret;
+
+ np = of_get_compatible_child(max7360_mfd->dev->of_node, GPO_COMPATIBLE);
+ if (np) {
+ ret = of_property_read_u32(np, "ngpios", &gpos);
+ if (ret < 0) {
+ dev_err(max7360_mfd->dev, "Failed to read gpos count\n");
+ return ret;
+ }
+ }
+
+ ret = device_property_read_u32(max7360_mfd->dev,
+ "keypad,num-columns", &columns);
+ if (ret < 0) {
+ dev_err(max7360_mfd->dev, "Failed to read columns count\n");
+ return ret;
+ }
+
+ if (gpos > MAX7360_MAX_GPO ||
+ (gpos + columns > MAX7360_MAX_KEY_COLS)) {
+ dev_err(max7360_mfd->dev,
+ "Incompatible gpos and columns count (%u, %u)\n",
+ gpos, columns);
+ return -EINVAL;
+ }
+
+ /*
+ * MAX7360_REG_DEBOUNCE contains configuration both for keypad debounce
+ * timings and gpos/keypad columns repartition. Only the later is
+ * modified here.
+ */
+ val = FIELD_PREP(MAX7360_PORTS, gpos);
+ ret = regmap_write_bits(max7360_mfd->regmap, MAX7360_REG_DEBOUNCE,
+ MAX7360_PORTS, val);
+ if (ret) {
+ dev_err(max7360_mfd->dev,
+ "Failed to write max7360 columns/gpos configuration");
+ return ret;
+ }
+
+ return 0;
+}
+
+int max7360_port_pin_request(struct device *dev, unsigned int pin, bool request)
+{
+ struct i2c_client *client;
+ struct max7360_mfd *max7360_mfd;
+ unsigned long flags;
+ int ret = 0;
+
+ client = to_i2c_client(dev);
+ max7360_mfd = i2c_get_clientdata(client);
+
+ spin_lock_irqsave(&request_lock, flags);
+ if (request) {
+ if (max7360_mfd->requested_ports & BIT(pin))
+ ret = -EBUSY;
+ else
+ max7360_mfd->requested_ports |= BIT(pin);
+ } else {
+ max7360_mfd->requested_ports &= ~BIT(pin);
+ }
+ spin_unlock_irqrestore(&request_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(max7360_port_pin_request);
+
+static int max7360_mask_irqs(struct max7360_mfd *max7360_mfd)
+{
+ unsigned int i;
+ unsigned int val;
+ int ret;
+
+ /*
+ * GPIO/PWM interrupts are not masked on reset: mask the during probe,
+ * avoiding repeated spurious interrupts if the corresponding drivers
+ * are not present.
+ */
+ for (i = 0; i < MAX7360_PORT_PWM_COUNT; i++) {
+ ret = regmap_write_bits(max7360_mfd->regmap,
+ MAX7360_REG_PWMCFG + i,
+ MAX7360_PORT_CFG_INTERRUPT_MASK,
+ MAX7360_PORT_CFG_INTERRUPT_MASK);
+ if (ret) {
+ dev_err(max7360_mfd->dev,
+ "failed to write max7360 port configuration");
+ return ret;
+ }
+ }
+
+ /* Read gpio in register, to ack any pending IRQ.
+ */
+ ret = regmap_read(max7360_mfd->regmap, MAX7360_REG_GPIOIN, &val);
+ if (ret) {
+ dev_err(max7360_mfd->dev, "Failed to read gpio values: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max7360_reset(struct max7360_mfd *max7360_mfd)
+{
+ int err;
+
+ /*
+ * Set back the default values.
+ * We do not use GPIO reset function here, as it does not work reliably.
+ */
+ err = regmap_write(max7360_mfd->regmap, MAX7360_REG_GPIODEB, 0x00);
+ if (err) {
+ dev_err(max7360_mfd->dev, "Failed to set configuration\n");
+ return err;
+ }
+
+ err = regmap_write(max7360_mfd->regmap, MAX7360_REG_GPIOCURR, MAX7360_REG_GPIOCURR_FIXED);
+ if (err) {
+ dev_err(max7360_mfd->dev, "Failed to set configuration\n");
+ return err;
+ }
+
+ err = regmap_write(max7360_mfd->regmap, MAX7360_REG_GPIOOUTM, 0x00);
+ if (err) {
+ dev_err(max7360_mfd->dev, "Failed to set configuration\n");
+ return err;
+ }
+
+ err = regmap_write(max7360_mfd->regmap, MAX7360_REG_PWMCOM, 0x00);
+ if (err) {
+ dev_err(max7360_mfd->dev, "Failed to set configuration\n");
+ return err;
+ }
+
+ err = regmap_write(max7360_mfd->regmap, MAX7360_REG_SLEEP, 0);
+ if (err) {
+ dev_err(max7360_mfd->dev, "Failed to set configuration\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int max7360_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct regmap *regmap;
+ struct max7360_mfd *max7360_mfd;
+ int err;
+
+ regmap = devm_regmap_init_i2c(client, &max7360_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to initialise regmap\n");
+
+ max7360_mfd = devm_kzalloc(dev, sizeof(*max7360_mfd), GFP_KERNEL);
+ if (!max7360_mfd)
+ return -ENOMEM;
+
+ max7360_mfd->regmap = regmap;
+ max7360_mfd->dev = dev;
+ i2c_set_clientdata(client, max7360_mfd);
+
+ err = max7360_reset(max7360_mfd);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to reset device\n");
+
+ err = max7360_set_gpos_count(max7360_mfd);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to set GPOS pin count\n");
+
+ /*
+ * Get the device out of shutdown mode.
+ */
+ err = regmap_write_bits(regmap, MAX7360_REG_GPIOCFG,
+ MAX7360_GPIO_CFG_GPIO_EN,
+ MAX7360_GPIO_CFG_GPIO_EN);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to set device out of shutdown\n");
+
+ err = max7360_mask_irqs(max7360_mfd);
+ if (err)
+ return dev_err_probe(dev, err, "could not mask interrupts\n");
+
+ err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+ max7360_cells, ARRAY_SIZE(max7360_cells),
+ NULL, 0, NULL);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to register child devices\n");
+
+ return 0;
+}
+
+static const struct of_device_id max7360_dt_match[] = {
+ { .compatible = "maxim,max7360" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, max7360_dt_match);
+
+static struct i2c_driver max7360_driver = {
+ .driver = {
+ .name = "max7360",
+ .of_match_table = max7360_dt_match,
+ },
+ .probe = max7360_probe,
+};
+module_i2c_driver(max7360_driver);
+
+MODULE_DESCRIPTION("Maxim MAX7360 MFD core driver");
+MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __LINUX_MFD_MAX7360_H
+#define __LINUX_MFD_MAX7360_H
+#include <linux/bitfield.h>
+#include <linux/device.h>
+
+#define MAX7360_MAX_KEY_ROWS 8
+#define MAX7360_MAX_KEY_COLS 8
+#define MAX7360_MAX_KEY_NUM (MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
+#define MAX7360_ROW_SHIFT 3
+
+#define MAX7360_MAX_GPIO 8
+#define MAX7360_MAX_GPO 6
+#define MAX7360_PORT_PWM_COUNT 8
+#define MAX7360_PORT_RTR_PIN (MAX7360_PORT_PWM_COUNT - 1)
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_KEYFIFO 0x00
+#define MAX7360_REG_CONFIG 0x01
+#define MAX7360_REG_DEBOUNCE 0x02
+#define MAX7360_REG_INTERRUPT 0x03
+#define MAX7360_REG_PORTS 0x04
+#define MAX7360_REG_KEYREP 0x05
+#define MAX7360_REG_SLEEP 0x06
+
+/*
+ * MAX7360 registers
+ */
+#define MAX7360_REG_GPIOCFG 0x40
+#define MAX7360_REG_GPIOCTRL 0x41
+#define MAX7360_REG_GPIODEB 0x42
+#define MAX7360_REG_GPIOCURR 0x43
+#define MAX7360_REG_GPIOOUTM 0x44
+#define MAX7360_REG_PWMCOM 0x45
+#define MAX7360_REG_RTRCFG 0x46
+#define MAX7360_REG_GPIOIN 0x49
+#define MAX7360_REG_RTR_CNT 0x4A
+#define MAX7360_REG_PWMBASE 0x50
+#define MAX7360_REG_PWMCFG 0x58
+
+#define MAX7360_REG_PORTCFGBASE 0x58
+
+/*
+ * Configuration register bits
+ */
+#define MAX7360_FIFO_EMPTY 0x3f
+#define MAX7360_FIFO_OVERFLOW 0x7f
+#define MAX7360_FIFO_RELEASE BIT(6)
+#define MAX7360_FIFO_COL GENMASK(5, 3)
+#define MAX7360_FIFO_ROW GENMASK(2, 0)
+
+#define MAX7360_CFG_SLEEP BIT(7)
+#define MAX7360_CFG_INTERRUPT BIT(5)
+#define MAX7360_CFG_KEY_RELEASE BIT(3)
+#define MAX7360_CFG_WAKEUP BIT(1)
+#define MAX7360_CFG_TIMEOUT BIT(0)
+
+#define MAX7360_DEBOUNCE GENMASK(4, 0)
+#define MAX7360_DEBOUNCE_MIN 9
+#define MAX7360_DEBOUNCE_MAX 40
+#define MAX7360_PORTS GENMASK(8, 5)
+
+#define MAX7360_INTERRUPT_TIME_MASK GENMASK(4, 0)
+#define MAX7360_INTERRUPT_FIFO_MASK GENMASK(7, 5)
+
+#define MAX7360_PORT_CFG_INTERRUPT_MASK BIT(7)
+#define MAX7360_PORT_CFG_INTERRUPT_EDGES BIT(6)
+
+#define MAX7360_REG_GPIOCURR_FIXED 0xC0
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7360_AUTOSLEEP_8192 0x01
+#define MAX7360_AUTOSLEEP_4096 0x02
+#define MAX7360_AUTOSLEEP_2048 0x03
+#define MAX7360_AUTOSLEEP_1024 0x04
+#define MAX7360_AUTOSLEEP_512 0x05
+#define MAX7360_AUTOSLEEP_256 0x06
+
+#define MAX7360_GPIO_CFG_RTR_EN BIT(7)
+#define MAX7360_GPIO_CFG_GPIO_EN BIT(4)
+#define MAX7360_GPIO_CFG_GPIO_RST BIT(3)
+
+#define MAX7360_ROT_DEBOUNCE GENMASK(3, 0)
+#define MAX7360_ROT_DEBOUNCE_MIN 0
+#define MAX7360_ROT_DEBOUNCE_MAX 15
+#define MAX7360_ROT_INTCNT GENMASK(6, 4)
+#define MAX7360_ROT_INTCNT_DLY BIT(7)
+
+#define MAX7360_INT_INTI 0
+#define MAX7360_INT_INTK 1
+
+#define MAX7360_INT_GPIO 0
+#define MAX7360_INT_KEYPAD 1
+#define MAX7360_INT_ROTARY 2
+
+#define MAX7360_NR_INTERNAL_IRQS 3
+
+#define MAX7360_DRVNAME_PWM "max7360-pwm"
+#define MAX7360_DRVNAME_GPO "max7360-gpo"
+#define MAX7360_DRVNAME_GPIO "max7360-gpio"
+#define MAX7360_DRVNAME_KEYPAD "max7360-keypad"
+#define MAX7360_DRVNAME_ROTARY "max7360-rotary"
+
+int max7360_port_pin_request(struct device *dev, unsigned int pin, bool request);
+
+#endif