diff mbox series

[v2,14/27] spi: spi-sn-f-ospi: Support per spi-mem operation frequency switches

Message ID 20241224-winbond-6-11-rc1-quad-support-v2-14-ad218dbc406f@bootlin.com
State New
Headers show
Series spi-nand/spi-mem DTR support | expand

Commit Message

Miquel Raynal Dec. 24, 2024, 5:05 p.m. UTC 
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.

The per-operation frequency capability is thus advertised to the spi-mem
core.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/spi/spi-sn-f-ospi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-sn-f-ospi.c b/drivers/spi/spi-sn-f-ospi.c
index adac645732fedfe6e33a5a0979ba43d5d203bfce..6ad4b729897e3909a5e22b33aa47b812219a6ee5 100644
--- a/drivers/spi/spi-sn-f-ospi.c
+++ b/drivers/spi/spi-sn-f-ospi.c
@@ -335,7 +335,6 @@  static void f_ospi_config_indir_protocol(struct f_ospi *ospi,
 static int f_ospi_indir_prepare_op(struct f_ospi *ospi, struct spi_mem *mem,
 				   const struct spi_mem_op *op)
 {
-	struct spi_device *spi = mem->spi;
 	u32 irq_stat_en;
 	int ret;
 
@@ -343,7 +342,7 @@  static int f_ospi_indir_prepare_op(struct f_ospi *ospi, struct spi_mem *mem,
 	if (ret)
 		return ret;
 
-	f_ospi_config_clk(ospi, spi->max_speed_hz);
+	f_ospi_config_clk(ospi, op->max_freq);
 
 	f_ospi_config_indir_protocol(ospi, mem, op);
 
@@ -577,6 +576,10 @@  static const struct spi_controller_mem_ops f_ospi_mem_ops = {
 	.exec_op = f_ospi_exec_op,
 };
 
+static const struct spi_controller_mem_caps f_ospi_mem_caps = {
+	.per_op_freq = true,
+};
+
 static int f_ospi_init(struct f_ospi *ospi)
 {
 	int ret;
@@ -614,6 +617,7 @@  static int f_ospi_probe(struct platform_device *pdev)
 		| SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL
 		| SPI_MODE_0 | SPI_MODE_1 | SPI_LSB_FIRST;
 	ctlr->mem_ops = &f_ospi_mem_ops;
+	ctlr->mem_caps = &f_ospi_mem_caps;
 	ctlr->bus_num = -1;
 	of_property_read_u32(dev->of_node, "num-cs", &num_cs);
 	if (num_cs > OSPI_NUM_CS) {