diff mbox

[RFC,2/2,MMC-4.5,MMC,UTIL] Disable emulation

Message ID 1336574901-26579-2-git-send-email-saugata.das@stericsson.com
State New
Headers show

Commit Message

Saugata Das May 9, 2012, 2:48 p.m. UTC
From: Saugata Das <saugata.das@linaro.org>

In this patch, we add utility to disable emulation mode in the eMMC-4.5.
This is done to increase the data sector size to 4KB.

Signed-off-by: Saugata Das <saugata.das@linaro.org>
---
 mmc.c      |    6 ++++++
 mmc.h      |    2 ++
 mmc_cmds.c |   42 ++++++++++++++++++++++++++++++++++++++++++
 mmc_cmds.h |    1 +
 4 files changed, 51 insertions(+), 0 deletions(-)

Comments

Subhash Jadavani May 14, 2012, 10:39 a.m. UTC | #1
On 5/9/2012 8:18 PM, Saugata Das wrote:
> From: Saugata Das<saugata.das@linaro.org>
>
> In this patch, we add utility to disable emulation mode in the eMMC-4.5.
> This is done to increase the data sector size to 4KB.
>
> Signed-off-by: Saugata Das<saugata.das@linaro.org>
> ---
>   mmc.c      |    6 ++++++
>   mmc.h      |    2 ++
>   mmc_cmds.c |   42 ++++++++++++++++++++++++++++++++++++++++++
>   mmc_cmds.h |    1 +
>   4 files changed, 51 insertions(+), 0 deletions(-)
>
> diff --git a/mmc.c b/mmc.c
> index c27fc24..43b95aa 100644
> --- a/mmc.c
> +++ b/mmc.c
> @@ -65,6 +65,12 @@ static struct Command commands[] = {
>   		"Set the eMMC writeprotect status of<device>.",
>   	  NULL
>   	},
> +	{ do_disable_emulation, -1,
can we add good name? which emulation we are disabling? It's 512B 
emulation mode, we are disabling.
> +	  "disable emulation", "<device>\n"
> +		"Set the eMMC data sector size to 4KB by disabling emulation<device>.",
> +	  NULL
> +	},
> +
>   	{ 0, 0, 0, 0 }
>   };
>
> diff --git a/mmc.h b/mmc.h
> index 3af36f1..a2050fa 100644
> --- a/mmc.h
> +++ b/mmc.h
> @@ -35,6 +35,8 @@
>   #define EXT_CSD_PART_SWITCH_TIME	199
>   #define EXT_CSD_BOOT_CFG		179
>   #define EXT_CSD_BOOT_WP			173
> +#define EXT_CSD_NATIVE_SECTOR_SIZE	63 /* R */
> +#define EXT_CSD_NATIVE_SECTOR	62 /* R/W */
Can we name this as EXT_CSD_USE_NATIVE_SECTOR?
>
>   /*
>    * EXT_CSD field definitions
> diff --git a/mmc_cmds.c b/mmc_cmds.c
> index 4562cef..2713ccd 100644
> --- a/mmc_cmds.c
> +++ b/mmc_cmds.c
> @@ -168,6 +168,48 @@ int do_writeprotect_set(int nargs, char **argv)
>   	return ret;
>   }
>
> +
> +int do_disable_emulation(int nargs, char **argv)
> +{
> +	__u8 ext_csd[512], native_sector_size;
> +	int fd, ret;
> +	char *device;
> +
> +	CHECK(nargs != 2, "Usage: mmc</path/to/mmcblkX>\n", exit(1));
> +
> +	device = argv[1];
> +
> +	fd = open(device, O_RDWR);
> +	if (fd<  0) {
> +		perror("open");
> +		exit(1);
> +	}
> +
> +	ret = read_extcsd(fd, ext_csd);
> +	if (ret) {
> +		fprintf(stderr, "Could not read EXT_CSD from %s\n", device);
> +		exit(1);
> +	}
> +
> +	native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE];
> +
> +	if (native_sector_size) {
> +		ret = write_extcsd_value(fd, EXT_CSD_NATIVE_SECTOR, 1);
Just curious, how are we going to power cycle the device after setting 
the USE_NATIVE_SECTOR? because DATA_SECTOR_SIZE won't be changed to 4K 
until we explicitly power cycle after setting this field.
> +
> +		if (ret) {
> +			fprintf(stderr, "Could not write 0x%02x to "
> +				"EXT_CSD[%d] in %s\n",
> +				1, EXT_CSD_BOOT_WP, device);
> +			exit(1);
> +		}
> +	} else {
> +		printf("MMC does not support 4KB native sector\n");
> +	}
> +
> +	return ret;
> +}
> +
> +
>   int do_read_extcsd(int nargs, char **argv)
>   {
>   	__u8 ext_csd[512], ext_csd_rev, reg;
> diff --git a/mmc_cmds.h b/mmc_cmds.h
> index 66e9acb..dd107d5 100644
> --- a/mmc_cmds.h
> +++ b/mmc_cmds.h
> @@ -19,3 +19,4 @@ int do_read_extcsd(int nargs, char **argv);
>   int do_write_extcsd(int nargs, char **argv);
>   int do_writeprotect_get(int nargs, char **argv);
>   int do_writeprotect_set(int nargs, char **argv);
> +int do_disable_emulation(int nargs, char **argv);
Subhash Jadavani May 14, 2012, 10:50 a.m. UTC | #2
On 5/9/2012 8:18 PM, Saugata Das wrote:
> From: Saugata Das<saugata.das@linaro.org>
>
> In this patch, we add utility to disable emulation mode in the eMMC-4.5.
> This is done to increase the data sector size to 4KB.
>
> Signed-off-by: Saugata Das<saugata.das@linaro.org>
> ---
>   mmc.c      |    6 ++++++
>   mmc.h      |    2 ++
>   mmc_cmds.c |   42 ++++++++++++++++++++++++++++++++++++++++++
>   mmc_cmds.h |    1 +
>   4 files changed, 51 insertions(+), 0 deletions(-)
>
> diff --git a/mmc.c b/mmc.c
> index c27fc24..43b95aa 100644
> --- a/mmc.c
> +++ b/mmc.c
> @@ -65,6 +65,12 @@ static struct Command commands[] = {
>   		"Set the eMMC writeprotect status of<device>.",
>   	  NULL
>   	},
> +	{ do_disable_emulation, -1,
> +	  "disable emulation", "<device>\n"
> +		"Set the eMMC data sector size to 4KB by disabling emulation<device>.",
> +	  NULL
> +	},
> +
>   	{ 0, 0, 0, 0 }
>   };
>
> diff --git a/mmc.h b/mmc.h
> index 3af36f1..a2050fa 100644
> --- a/mmc.h
> +++ b/mmc.h
> @@ -35,6 +35,8 @@
>   #define EXT_CSD_PART_SWITCH_TIME	199
>   #define EXT_CSD_BOOT_CFG		179
>   #define EXT_CSD_BOOT_WP			173
> +#define EXT_CSD_NATIVE_SECTOR_SIZE	63 /* R */
> +#define EXT_CSD_NATIVE_SECTOR	62 /* R/W */
>
>   /*
>    * EXT_CSD field definitions
> diff --git a/mmc_cmds.c b/mmc_cmds.c
> index 4562cef..2713ccd 100644
> --- a/mmc_cmds.c
> +++ b/mmc_cmds.c
> @@ -168,6 +168,48 @@ int do_writeprotect_set(int nargs, char **argv)
>   	return ret;
>   }
>
> +
> +int do_disable_emulation(int nargs, char **argv)
> +{
> +	__u8 ext_csd[512], native_sector_size;
> +	int fd, ret;
> +	char *device;
> +
> +	CHECK(nargs != 2, "Usage: mmc</path/to/mmcblkX>\n", exit(1));
> +
> +	device = argv[1];
> +
> +	fd = open(device, O_RDWR);
> +	if (fd<  0) {
> +		perror("open");
> +		exit(1);
> +	}
> +
> +	ret = read_extcsd(fd, ext_csd);
> +	if (ret) {
> +		fprintf(stderr, "Could not read EXT_CSD from %s\n", device);
> +		exit(1);
> +	}
> +
> +	native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE];
> +
> +	if (native_sector_size) {
Before setting the use_native_sector field, can you also check if 
NATIVE_SECTOR_SIZE and DATA_SECTOR_SIZE fields are different. If they 
are same then there is no need to set the USE_NATIVE_SECTOR size field.

> +		ret = write_extcsd_value(fd, EXT_CSD_NATIVE_SECTOR, 1);
> +
> +		if (ret) {
> +			fprintf(stderr, "Could not write 0x%02x to "
> +				"EXT_CSD[%d] in %s\n",
> +				1, EXT_CSD_BOOT_WP, device);
> +			exit(1);
> +		}
> +	} else {
> +		printf("MMC does not support 4KB native sector\n");
> +	}
> +
> +	return ret;
> +}
> +
> +
>   int do_read_extcsd(int nargs, char **argv)
>   {
>   	__u8 ext_csd[512], ext_csd_rev, reg;
> diff --git a/mmc_cmds.h b/mmc_cmds.h
> index 66e9acb..dd107d5 100644
> --- a/mmc_cmds.h
> +++ b/mmc_cmds.h
> @@ -19,3 +19,4 @@ int do_read_extcsd(int nargs, char **argv);
>   int do_write_extcsd(int nargs, char **argv);
>   int do_writeprotect_get(int nargs, char **argv);
>   int do_writeprotect_set(int nargs, char **argv);
> +int do_disable_emulation(int nargs, char **argv);
Saugata Das May 14, 2012, 3:09 p.m. UTC | #3
On 14 May 2012 16:20, Subhash Jadavani <subhashj@codeaurora.org> wrote:
> On 5/9/2012 8:18 PM, Saugata Das wrote:
>>
>> From: Saugata Das<saugata.das@linaro.org>
>>
>> In this patch, we add utility to disable emulation mode in the eMMC-4.5.
>> This is done to increase the data sector size to 4KB.
>>
>> Signed-off-by: Saugata Das<saugata.das@linaro.org>
>> ---
>>  mmc.c      |    6 ++++++
>>  mmc.h      |    2 ++
>>  mmc_cmds.c |   42 ++++++++++++++++++++++++++++++++++++++++++
>>  mmc_cmds.h |    1 +
>>  4 files changed, 51 insertions(+), 0 deletions(-)
>>
>> diff --git a/mmc.c b/mmc.c
>> index c27fc24..43b95aa 100644
>> --- a/mmc.c
>> +++ b/mmc.c
>> @@ -65,6 +65,12 @@ static struct Command commands[] = {
>>                "Set the eMMC writeprotect status of<device>.",
>>          NULL
>>        },
>> +       { do_disable_emulation, -1,
>> +         "disable emulation", "<device>\n"
>> +               "Set the eMMC data sector size to 4KB by disabling
>> emulation<device>.",
>> +         NULL
>> +       },
>> +
>>        { 0, 0, 0, 0 }
>>  };
>>
>> diff --git a/mmc.h b/mmc.h
>> index 3af36f1..a2050fa 100644
>> --- a/mmc.h
>> +++ b/mmc.h
>> @@ -35,6 +35,8 @@
>>  #define EXT_CSD_PART_SWITCH_TIME      199
>>  #define EXT_CSD_BOOT_CFG              179
>>  #define EXT_CSD_BOOT_WP                       173
>> +#define EXT_CSD_NATIVE_SECTOR_SIZE     63 /* R */
>> +#define EXT_CSD_NATIVE_SECTOR  62 /* R/W */
>>
>>  /*
>>   * EXT_CSD field definitions
>> diff --git a/mmc_cmds.c b/mmc_cmds.c
>> index 4562cef..2713ccd 100644
>> --- a/mmc_cmds.c
>> +++ b/mmc_cmds.c
>> @@ -168,6 +168,48 @@ int do_writeprotect_set(int nargs, char **argv)
>>        return ret;
>>  }
>>
>> +
>> +int do_disable_emulation(int nargs, char **argv)
>> +{
>> +       __u8 ext_csd[512], native_sector_size;
>> +       int fd, ret;
>> +       char *device;
>> +
>> +       CHECK(nargs != 2, "Usage: mmc</path/to/mmcblkX>\n", exit(1));
>> +
>> +       device = argv[1];
>> +
>> +       fd = open(device, O_RDWR);
>> +       if (fd<  0) {
>> +               perror("open");
>> +               exit(1);
>> +       }
>> +
>> +       ret = read_extcsd(fd, ext_csd);
>> +       if (ret) {
>> +               fprintf(stderr, "Could not read EXT_CSD from %s\n",
>> device);
>> +               exit(1);
>> +       }
>> +
>> +       native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE];
>> +
>> +       if (native_sector_size) {
>
> Before setting the use_native_sector field, can you also check if
> NATIVE_SECTOR_SIZE and DATA_SECTOR_SIZE fields are different. If they are
> same then there is no need to set the USE_NATIVE_SECTOR size field.
>

Ok

>
>> +               ret = write_extcsd_value(fd, EXT_CSD_NATIVE_SECTOR, 1);
>> +
>> +               if (ret) {
>> +                       fprintf(stderr, "Could not write 0x%02x to "
>> +                               "EXT_CSD[%d] in %s\n",
>> +                               1, EXT_CSD_BOOT_WP, device);
>> +                       exit(1);
>> +               }
>> +       } else {
>> +               printf("MMC does not support 4KB native sector\n");
>> +       }
>> +
>> +       return ret;
>> +}
>> +
>> +
>>  int do_read_extcsd(int nargs, char **argv)
>>  {
>>        __u8 ext_csd[512], ext_csd_rev, reg;
>> diff --git a/mmc_cmds.h b/mmc_cmds.h
>> index 66e9acb..dd107d5 100644
>> --- a/mmc_cmds.h
>> +++ b/mmc_cmds.h
>> @@ -19,3 +19,4 @@ int do_read_extcsd(int nargs, char **argv);
>>  int do_write_extcsd(int nargs, char **argv);
>>  int do_writeprotect_get(int nargs, char **argv);
>>  int do_writeprotect_set(int nargs, char **argv);
>> +int do_disable_emulation(int nargs, char **argv);
>
>
Saugata Das May 14, 2012, 3:25 p.m. UTC | #4
On 14 May 2012 16:09, Subhash Jadavani <subhashj@codeaurora.org> wrote:
> On 5/9/2012 8:18 PM, Saugata Das wrote:
>>
>> From: Saugata Das<saugata.das@linaro.org>
>>
>> In this patch, we add utility to disable emulation mode in the eMMC-4.5.
>> This is done to increase the data sector size to 4KB.
>>
>> Signed-off-by: Saugata Das<saugata.das@linaro.org>
>> ---
>>  mmc.c      |    6 ++++++
>>  mmc.h      |    2 ++
>>  mmc_cmds.c |   42 ++++++++++++++++++++++++++++++++++++++++++
>>  mmc_cmds.h |    1 +
>>  4 files changed, 51 insertions(+), 0 deletions(-)
>>
>> diff --git a/mmc.c b/mmc.c
>> index c27fc24..43b95aa 100644
>> --- a/mmc.c
>> +++ b/mmc.c
>> @@ -65,6 +65,12 @@ static struct Command commands[] = {
>>                "Set the eMMC writeprotect status of<device>.",
>>          NULL
>>        },
>> +       { do_disable_emulation, -1,
>
> can we add good name? which emulation we are disabling? It's 512B emulation
> mode, we are disabling.
>

Ok

>> +         "disable emulation", "<device>\n"
>> +               "Set the eMMC data sector size to 4KB by disabling
>> emulation<device>.",
>> +         NULL
>> +       },
>> +
>>        { 0, 0, 0, 0 }
>>  };
>>
>> diff --git a/mmc.h b/mmc.h
>> index 3af36f1..a2050fa 100644
>> --- a/mmc.h
>> +++ b/mmc.h
>> @@ -35,6 +35,8 @@
>>  #define EXT_CSD_PART_SWITCH_TIME      199
>>  #define EXT_CSD_BOOT_CFG              179
>>  #define EXT_CSD_BOOT_WP                       173
>> +#define EXT_CSD_NATIVE_SECTOR_SIZE     63 /* R */
>> +#define EXT_CSD_NATIVE_SECTOR  62 /* R/W */
>
> Can we name this as EXT_CSD_USE_NATIVE_SECTOR?
>

Ok

>>
>>  /*
>>   * EXT_CSD field definitions
>> diff --git a/mmc_cmds.c b/mmc_cmds.c
>> index 4562cef..2713ccd 100644
>> --- a/mmc_cmds.c
>> +++ b/mmc_cmds.c
>> @@ -168,6 +168,48 @@ int do_writeprotect_set(int nargs, char **argv)
>>        return ret;
>>  }
>>
>> +
>> +int do_disable_emulation(int nargs, char **argv)
>> +{
>> +       __u8 ext_csd[512], native_sector_size;
>> +       int fd, ret;
>> +       char *device;
>> +
>> +       CHECK(nargs != 2, "Usage: mmc</path/to/mmcblkX>\n", exit(1));
>> +
>> +       device = argv[1];
>> +
>> +       fd = open(device, O_RDWR);
>> +       if (fd<  0) {
>> +               perror("open");
>> +               exit(1);
>> +       }
>> +
>> +       ret = read_extcsd(fd, ext_csd);
>> +       if (ret) {
>> +               fprintf(stderr, "Could not read EXT_CSD from %s\n",
>> device);
>> +               exit(1);
>> +       }
>> +
>> +       native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE];
>> +
>> +       if (native_sector_size) {
>> +               ret = write_extcsd_value(fd, EXT_CSD_NATIVE_SECTOR, 1);
>
> Just curious, how are we going to power cycle the device after setting the
> USE_NATIVE_SECTOR? because DATA_SECTOR_SIZE won't be changed to 4K until we
> explicitly power cycle after setting this field.
>

I will add a "printf" instructing the user to power cycle the eMMC at
the end of the switch.

>> +
>> +               if (ret) {
>> +                       fprintf(stderr, "Could not write 0x%02x to "
>> +                               "EXT_CSD[%d] in %s\n",
>> +                               1, EXT_CSD_BOOT_WP, device);
>> +                       exit(1);
>> +               }
>> +       } else {
>> +               printf("MMC does not support 4KB native sector\n");
>> +       }
>> +
>> +       return ret;
>> +}
>> +
>> +
>>  int do_read_extcsd(int nargs, char **argv)
>>  {
>>        __u8 ext_csd[512], ext_csd_rev, reg;
>> diff --git a/mmc_cmds.h b/mmc_cmds.h
>> index 66e9acb..dd107d5 100644
>> --- a/mmc_cmds.h
>> +++ b/mmc_cmds.h
>> @@ -19,3 +19,4 @@ int do_read_extcsd(int nargs, char **argv);
>>  int do_write_extcsd(int nargs, char **argv);
>>  int do_writeprotect_get(int nargs, char **argv);
>>  int do_writeprotect_set(int nargs, char **argv);
>> +int do_disable_emulation(int nargs, char **argv);
>
>
diff mbox

Patch

diff --git a/mmc.c b/mmc.c
index c27fc24..43b95aa 100644
--- a/mmc.c
+++ b/mmc.c
@@ -65,6 +65,12 @@  static struct Command commands[] = {
 		"Set the eMMC writeprotect status of <device>.",
 	  NULL
 	},
+	{ do_disable_emulation, -1,
+	  "disable emulation", "<device>\n"
+		"Set the eMMC data sector size to 4KB by disabling emulation <device>.",
+	  NULL
+	},
+
 	{ 0, 0, 0, 0 }
 };
 
diff --git a/mmc.h b/mmc.h
index 3af36f1..a2050fa 100644
--- a/mmc.h
+++ b/mmc.h
@@ -35,6 +35,8 @@ 
 #define EXT_CSD_PART_SWITCH_TIME	199
 #define EXT_CSD_BOOT_CFG		179
 #define EXT_CSD_BOOT_WP			173
+#define EXT_CSD_NATIVE_SECTOR_SIZE	63 /* R */
+#define EXT_CSD_NATIVE_SECTOR	62 /* R/W */
 
 /*
  * EXT_CSD field definitions
diff --git a/mmc_cmds.c b/mmc_cmds.c
index 4562cef..2713ccd 100644
--- a/mmc_cmds.c
+++ b/mmc_cmds.c
@@ -168,6 +168,48 @@  int do_writeprotect_set(int nargs, char **argv)
 	return ret;
 }
 
+
+int do_disable_emulation(int nargs, char **argv)
+{
+	__u8 ext_csd[512], native_sector_size;
+	int fd, ret;
+	char *device;
+
+	CHECK(nargs != 2, "Usage: mmc </path/to/mmcblkX>\n", exit(1));
+
+	device = argv[1];
+
+	fd = open(device, O_RDWR);
+	if (fd < 0) {
+		perror("open");
+		exit(1);
+	}
+
+	ret = read_extcsd(fd, ext_csd);
+	if (ret) {
+		fprintf(stderr, "Could not read EXT_CSD from %s\n", device);
+		exit(1);
+	}
+
+	native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE];
+
+	if (native_sector_size) {
+		ret = write_extcsd_value(fd, EXT_CSD_NATIVE_SECTOR, 1);
+
+		if (ret) {
+			fprintf(stderr, "Could not write 0x%02x to "
+				"EXT_CSD[%d] in %s\n",
+				1, EXT_CSD_BOOT_WP, device);
+			exit(1);
+		}
+	} else {
+		printf("MMC does not support 4KB native sector\n");
+	}
+
+	return ret;
+}
+
+
 int do_read_extcsd(int nargs, char **argv)
 {
 	__u8 ext_csd[512], ext_csd_rev, reg;
diff --git a/mmc_cmds.h b/mmc_cmds.h
index 66e9acb..dd107d5 100644
--- a/mmc_cmds.h
+++ b/mmc_cmds.h
@@ -19,3 +19,4 @@  int do_read_extcsd(int nargs, char **argv);
 int do_write_extcsd(int nargs, char **argv);
 int do_writeprotect_get(int nargs, char **argv);
 int do_writeprotect_set(int nargs, char **argv);
+int do_disable_emulation(int nargs, char **argv);