diff mbox series

[PULL,04/72] hw/net/lan9118_phy: Reuse MII constants

Message ID 20241211162004.2795499-5-peter.maydell@linaro.org
State Not Applicable
Headers show
Series [PULL,01/72] hw/net/lan9118: Extract lan9118_phy | expand

Commit Message

Peter Maydell Dec. 11, 2024, 4:18 p.m. UTC 
From: Bernhard Beschow <shentey@gmail.com>

Prefer named constants over magic values for better readability.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20241102125724.532843-5-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/mii.h |  6 +++++
 hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++----------------
 2 files changed, 46 insertions(+), 23 deletions(-)
diff mbox series

Patch

diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h
index f7feddac9bd..55bf7c92a1c 100644
--- a/include/hw/net/mii.h
+++ b/include/hw/net/mii.h
@@ -71,6 +71,7 @@ 
 #define MII_BMSR_JABBER     (1 << 1)  /* Jabber detected */
 #define MII_BMSR_EXTCAP     (1 << 0)  /* Ext-reg capability */
 
+#define MII_ANAR_RFAULT     (1 << 13) /* Say we can detect faults */
 #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */
 #define MII_ANAR_PAUSE      (1 << 10) /* Try for pause */
 #define MII_ANAR_TXFD       (1 << 8)
@@ -78,6 +79,7 @@ 
 #define MII_ANAR_10FD       (1 << 6)
 #define MII_ANAR_10         (1 << 5)
 #define MII_ANAR_CSMACD     (1 << 0)
+#define MII_ANAR_SELECT     (0x001f)  /* Selector bits */
 
 #define MII_ANLPAR_ACK      (1 << 14)
 #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */
@@ -112,6 +114,10 @@ 
 #define RTL8201CP_PHYID1    0x0000
 #define RTL8201CP_PHYID2    0x8201
 
+/* SMSC LAN9118 */
+#define SMSCLAN9118_PHYID1  0x0007
+#define SMSCLAN9118_PHYID2  0xc0d1
+
 /* RealTek 8211E */
 #define RTL8211E_PHYID1     0x001c
 #define RTL8211E_PHYID2     0xc915
diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c
index d8fc9ddd3ac..874dae4155a 100644
--- a/hw/net/lan9118_phy.c
+++ b/hw/net/lan9118_phy.c
@@ -14,6 +14,7 @@ 
 
 #include "qemu/osdep.h"
 #include "hw/net/lan9118_phy.h"
+#include "hw/net/mii.h"
 #include "hw/irq.h"
 #include "hw/resettable.h"
 #include "migration/vmstate.h"
@@ -38,26 +39,28 @@  uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg)
     uint16_t val;
 
     switch (reg) {
-    case 0: /* Basic Control */
+    case MII_BMCR:
         val = s->control;
         break;
-    case 1: /* Basic Status */
+    case MII_BMSR:
         val = s->status;
         break;
-    case 2: /* ID1 */
-        val = 0x0007;
+    case MII_PHYID1:
+        val = SMSCLAN9118_PHYID1;
         break;
-    case 3: /* ID2 */
-        val = 0xc0d1;
+    case MII_PHYID2:
+        val = SMSCLAN9118_PHYID2;
         break;
-    case 4: /* Auto-neg advertisement */
+    case MII_ANAR:
         val = s->advertise;
         break;
-    case 5: /* Auto-neg Link Partner Ability */
-        val = 0x0fe1;
+    case MII_ANLPAR:
+        val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 |
+              MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD |
+              MII_ANLPAR_10 | MII_ANLPAR_CSMACD;
         break;
-    case 6: /* Auto-neg Expansion */
-        val = 1;
+    case MII_ANER:
+        val = MII_ANER_NWAY;
         break;
     case 29: /* Interrupt source. */
         val = s->ints;
@@ -92,19 +95,24 @@  void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val)
     trace_lan9118_phy_write(val, reg);
 
     switch (reg) {
-    case 0: /* Basic Control */
-        if (val & 0x8000) {
+    case MII_BMCR:
+        if (val & MII_BMCR_RESET) {
             lan9118_phy_reset(s);
         } else {
-            s->control = val & 0x7980;
+            s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 |
+                                MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD |
+                                MII_BMCR_CTST);
             /* Complete autonegotiation immediately. */
-            if (val & 0x1000) {
-                s->status |= 0x0020;
+            if (val & MII_BMCR_AUTOEN) {
+                s->status |= MII_BMSR_AN_COMP;
             }
         }
         break;
-    case 4: /* Auto-neg advertisement */
-        s->advertise = (val & 0x2d7f) | 0x80;
+    case MII_ANAR:
+        s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM |
+                               MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 |
+                               MII_ANAR_SELECT))
+                     | MII_ANAR_TX;
         break;
     case 30: /* Interrupt mask */
         s->int_mask = val & 0xff;
@@ -131,11 +139,11 @@  void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down)
     /* Autonegotiation status mirrors link status. */
     if (link_down) {
         trace_lan9118_phy_update_link("down");
-        s->status &= ~0x0024;
+        s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST);
         s->ints |= PHY_INT_DOWN;
     } else {
         trace_lan9118_phy_update_link("up");
-        s->status |= 0x0024;
+        s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST;
         s->ints |= PHY_INT_ENERGYON;
         s->ints |= PHY_INT_AUTONEG_COMPLETE;
     }
@@ -146,9 +154,18 @@  void lan9118_phy_reset(Lan9118PhyState *s)
 {
     trace_lan9118_phy_reset();
 
-    s->control = 0x3000;
-    s->status = 0x7809;
-    s->advertise = 0x01e1;
+    s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100;
+    s->status = MII_BMSR_100TX_FD
+                | MII_BMSR_100TX_HD
+                | MII_BMSR_10T_FD
+                | MII_BMSR_10T_HD
+                | MII_BMSR_AUTONEG
+                | MII_BMSR_EXTCAP;
+    s->advertise = MII_ANAR_TXFD
+                   | MII_ANAR_TX
+                   | MII_ANAR_10FD
+                   | MII_ANAR_10
+                   | MII_ANAR_CSMACD;
     s->int_mask = 0;
     s->ints = 0;
     lan9118_phy_update_link(s, s->link_down);