@@ -96,6 +96,7 @@ static const struct cfg_param {
{"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING},
{"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING},
{"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE},
+ {"nvidia,gpio-mode", TEGRA_PINCONF_PARAM_GPIO_MODE},
};
static int tegra_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
@@ -476,6 +477,16 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx,
*bit = g->drvtype_bit;
*width = 2;
break;
+ case TEGRA_PINCONF_PARAM_GPIO_MODE:
+ if (pmx->soc->sfsel_in_mux) {
+ *bank = g->mux_bank;
+ *reg = g->mux_reg;
+ *bit = g->sfsel_bit;
+ *width = 1;
+ } else {
+ *reg = -ENODEV;
+ }
+ break;
default:
dev_err(pmx->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
@@ -60,6 +60,8 @@ enum tegra_pinconf_param {
TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
/* argument: Integer, range is HW-dependant */
TEGRA_PINCONF_PARAM_DRIVE_TYPE,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_GPIO_MODE,
};
enum tegra_pinconf_pull {
The SFIO/GPIO select bit is a crucial part of Tegra's pin multiplexing system: - When set to 1, the pin operates in SFIO mode, controlled by the pin's assigned special function. - When set to 0, the pin operates as a general-purpose GPIO. This SFIO/GPIO select bit that is set for a given pin is not displayed, adding the support to retrieve this information from the pinmux set for each pin. Signed-off-by: Prathamesh Shete <pshete@nvidia.com> --- drivers/pinctrl/tegra/pinctrl-tegra.c | 11 +++++++++++ drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 13 insertions(+)