diff mbox series

[v3,06/15] media: i2c: ds90ub960: Use HZ_PER_MHZ

Message ID 20241204-ub9xx-fixes-v3-6-a933c109b323@ideasonboard.com
State Superseded
Headers show
Series media: i2c: ds90ub9xx: Misc fixes and improvements | expand

Commit Message

Tomi Valkeinen Dec. 4, 2024, 11:05 a.m. UTC 
Use HZ_PER_MHZ instead of 1000000U.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/media/i2c/ds90ub960.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index bfffa14e2049..98d815526341 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -43,6 +43,7 @@ 
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/units.h>
 #include <linux/workqueue.h>
 
 #include <media/i2c/ds90ub9xx.h>
@@ -1579,7 +1580,7 @@  static int ub960_rxport_wait_locks(struct ub960_data *priv,
 
 		if (priv->hw_data->is_ub9702) {
 			dev_dbg(dev, "\trx%u: locked, freq %llu Hz\n",
-				nport, (v * 1000000ULL) >> 8);
+				nport, ((u64)v * HZ_PER_MHZ) >> 8);
 		} else {
 			ret = ub960_rxport_get_strobe_pos(priv, nport,
 							  &strobe_pos);
@@ -1593,7 +1594,7 @@  static int ub960_rxport_wait_locks(struct ub960_data *priv,
 			dev_dbg(dev,
 				"\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n",
 				nport, strobe_pos, eq_level,
-				(v * 1000000ULL) >> 8);
+				((u64)v * HZ_PER_MHZ) >> 8);
 		}
 	}
 
@@ -3066,7 +3067,7 @@  static int ub960_log_status(struct v4l2_subdev *sd)
 		dev_info(dev, "\trx_port_sts2 %#02x\n", v);
 
 		ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v16);
-		dev_info(dev, "\tlink freq %llu Hz\n", (v16 * 1000000ULL) >> 8);
+		dev_info(dev, "\tlink freq %llu Hz\n", ((u64)v16 * HZ_PER_MHZ) >> 8);
 
 		ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v16);
 		dev_info(dev, "\tparity errors %u\n", v16);
@@ -3866,7 +3867,7 @@  static int ub960_enable_core_hw(struct ub960_data *priv)
 
 	dev_dbg(dev, "refclk valid %u freq %u MHz (clk fw freq %lu MHz)\n",
 		!!(dev_sts & BIT(4)), refclk_freq,
-		clk_get_rate(priv->refclk) / 1000000);
+		clk_get_rate(priv->refclk) / HZ_PER_MHZ);
 
 	/* Disable all RX ports by default */
 	ret = ub960_write(priv, UB960_SR_RX_PORT_CTL, 0);