| Message ID | 20241128120922.3518582-2-quic_chejiang@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | bluetooth: qca: Add QCA6698 Bluetooth chip | expand |
On 28/11/2024 13:09, Cheng Jiang wrote: > The SA8775P-Ride uses the QCA6698 chipset, which shares the same IP core > as the WCN6855. However, it has different RF components and RAM sizes, > so new firmware is needed. This change allows driver to distinguish it > from the WCN6855 and load the specific firmware. > > Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi > index 3fc62e123..f95e709bd 100644 > --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi > +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi > @@ -856,7 +856,7 @@ &uart17 { > status = "okay"; > > bluetooth { > - compatible = "qcom,wcn6855-bt"; > + compatible = "qcom,qca6698-bt"; This breaks users without mentioning it, without really justifying the impact. Also it is not clear for me whether devices are or are not compatible. Best regards, Krzysztof
Hi Krzysztof, On 11/28/2024 10:39 PM, Krzysztof Kozlowski wrote: > On 28/11/2024 13:09, Cheng Jiang wrote: >> The SA8775P-Ride uses the QCA6698 chipset, which shares the same IP core >> as the WCN6855. However, it has different RF components and RAM sizes, >> so new firmware is needed. This change allows driver to distinguish it >> from the WCN6855 and load the specific firmware. >> >> Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi >> index 3fc62e123..f95e709bd 100644 >> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi >> @@ -856,7 +856,7 @@ &uart17 { >> status = "okay"; >> >> bluetooth { >> - compatible = "qcom,wcn6855-bt"; >> + compatible = "qcom,qca6698-bt"; > > This breaks users without mentioning it, without really justifying the > impact. Also it is not clear for me whether devices are or are not > compatible. QCA6698 can use the wcn6855 firmware, but the performance is not good as expect. To avoid breaking existing projects, we plan to upstream a new firmware for this chip. If use the 'firmware-name' to specify the firmware, we can keep the compatible here unchanged. Is it OK? > > Best regards, > Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi index 3fc62e123..f95e709bd 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -856,7 +856,7 @@ &uart17 { status = "okay"; bluetooth { - compatible = "qcom,wcn6855-bt"; + compatible = "qcom,qca6698-bt"; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddaon-supply = <&vreg_pmu_aon_0p59>;
The SA8775P-Ride uses the QCA6698 chipset, which shares the same IP core as the WCN6855. However, it has different RF components and RAM sizes, so new firmware is needed. This change allows driver to distinguish it from the WCN6855 and load the specific firmware. Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> --- arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)