@@ -129,6 +129,16 @@ static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
}
+static const struct property_entry dwc3_imx8mp_properties[] = {
+ PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk"),
+ PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk"),
+ {},
+};
+
+static const struct software_node dwc3_imx8mp_swnode = {
+ .properties = dwc3_imx8mp_properties,
+};
+
static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
{
struct dwc3_imx8mp *dwc3_imx = _dwc3_imx;
@@ -148,17 +158,6 @@ static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
return IRQ_HANDLED;
}
-static int dwc3_imx8mp_set_software_node(struct device *dev)
-{
- struct property_entry props[3] = { 0 };
- int prop_idx = 0;
-
- props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk");
- props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk");
-
- return device_create_managed_software_node(dev, props, NULL);
-}
-
static int dwc3_imx8mp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -221,17 +220,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
if (err < 0)
goto disable_rpm;
- err = dwc3_imx8mp_set_software_node(dev);
+ err = device_add_software_node(dev, &dwc3_imx8mp_swnode);
if (err) {
err = -ENODEV;
- dev_err(dev, "failed to create software node\n");
+ dev_err(dev, "failed to add software node\n");
goto disable_rpm;
}
err = of_platform_populate(node, NULL, NULL, dev);
if (err) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
- goto disable_rpm;
+ goto remove_swnode;
}
dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
@@ -255,6 +254,8 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
depopulate:
of_platform_depopulate(dev);
+remove_swnode:
+ device_remove_software_node(dev);
disable_rpm:
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
@@ -268,6 +269,7 @@ static void dwc3_imx8mp_remove(struct platform_device *pdev)
pm_runtime_get_sync(dev);
of_platform_depopulate(dev);
+ device_remove_software_node(dev);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
When unbind and bind the device again, kernel will dump below warning: [ 173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node' [ 173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 #144 [ 173.989923] Hardware name: NXP i.MX95 15X15 board (DT) [ 173.995062] Call trace: [ 173.997509] dump_backtrace+0x90/0xe8 [ 174.001196] show_stack+0x18/0x24 [ 174.004524] dump_stack_lvl+0x74/0x8c [ 174.008198] dump_stack+0x18/0x24 [ 174.011526] sysfs_warn_dup+0x64/0x80 [ 174.015201] sysfs_do_create_link_sd+0xf0/0xf8 [ 174.019656] sysfs_create_link+0x20/0x40 [ 174.023590] software_node_notify+0x90/0x100 [ 174.027872] device_create_managed_software_node+0xec/0x108 ... The '4c010010.usb' device is a platform device created during the initcall and is never removed, which causes its associated software node to persist indefinitely. The existing device_create_managed_software_node() does not provide a corresponding removal function. Replace device_create_managed_software_node() with the device_add_software_node() and device_remove_software_node() pair to ensure proper addition and removal of software nodes, addressing this issue. Fixes: a9400f1979a0 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode") Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- Changes in v2: - add error handling as suggested by Thinh Nguyen - modify commit message as suggested Frank - add Rb-tag --- drivers/usb/dwc3/dwc3-imx8mp.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)