| Message ID | 20241125140301.3912-4-Kai.Makisara@kolumbus.fi |
|---|---|
| State | New |
| Headers | show |
| Series | scsi: st: scsi_error: More reset patches | expand |
Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> On 11/25/24 09:03, Kai Mäkisara wrote: > Compare the stored values of por_ctr and new_media_ctr against > the values in the device struct. In case of mismatch, the > Unit Attention corresponding to the counter has happened. > This is a safeguard against another ULD catching the > Unit Attention sense data. > > Remove use of the was_reset flag in struct scsi_device. > > Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> > --- > drivers/scsi/st.c | 28 +++++++++++++++++++++++++--- > drivers/scsi/st.h | 4 ++++ > 2 files changed, 29 insertions(+), 3 deletions(-) > > diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c > index a0667a0ae4c9..ad86dfbc8919 100644 > --- a/drivers/scsi/st.c > +++ b/drivers/scsi/st.c > @@ -163,9 +163,11 @@ static const char *st_formats[] = { > > static int debugging = DEBUG; > > +/* Setting these non-zero may risk recognizing resets */ > #define MAX_RETRIES 0 > #define MAX_WRITE_RETRIES 0 > #define MAX_READY_RETRIES 0 > + > #define NO_TAPE NOT_READY > > #define ST_TIMEOUT (900 * HZ) > @@ -357,10 +359,18 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) > { > int result = SRpnt->result; > u8 scode; > + unsigned int ctr; > DEB(const char *stp;) > char *name = STp->name; > struct st_cmdstatus *cmdstatp; > > + ctr = scsi_get_ua_por_ctr(STp->device); > + if (ctr != STp->por_ctr) { > + STp->por_ctr = ctr; > + STp->pos_unknown = 1; /* ASC => power on / reset */ > + st_printk(KERN_WARNING, STp, "Power on/reset recognized."); > + } > + > if (!result) > return 0; > > @@ -413,10 +423,11 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) > if (cmdstatp->have_sense && > cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17) > STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */ > - if (cmdstatp->have_sense && scode == UNIT_ATTENTION && cmdstatp->sense_hdr.asc == 0x29) > + if (cmdstatp->have_sense && scode == UNIT_ATTENTION && > + cmdstatp->sense_hdr.asc == 0x29 && !STp->pos_unknown) { > STp->pos_unknown = 1; /* ASC => power on / reset */ > - > - STp->pos_unknown |= STp->device->was_reset; > + st_printk(KERN_WARNING, STp, "Power on/reset recognized."); > + } > > if (cmdstatp->have_sense && > scode == RECOVERED_ERROR > @@ -968,6 +979,7 @@ static int test_ready(struct scsi_tape *STp, int do_wait) > { > int attentions, waits, max_wait, scode; > int retval = CHKRES_READY, new_session = 0; > + unsigned int ctr; > unsigned char cmd[MAX_COMMAND_SIZE]; > struct st_request *SRpnt = NULL; > struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; > @@ -1024,6 +1036,13 @@ static int test_ready(struct scsi_tape *STp, int do_wait) > } > } > > + ctr = scsi_get_ua_new_media_ctr(STp->device); > + if (ctr != STp->new_media_ctr) { > + STp->new_media_ctr = ctr; > + new_session = 1; > + DEBC_printk(STp, "New tape session."); > + } > + > retval = (STp->buffer)->syscall_result; > if (!retval) > retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY; > @@ -4394,6 +4413,9 @@ static int st_probe(struct device *dev) > goto out_idr_remove; > } > > + tpnt->new_media_ctr = scsi_get_ua_new_media_ctr(SDp); > + tpnt->por_ctr = scsi_get_ua_por_ctr(SDp); > + > dev_set_drvdata(dev, tpnt); > > > diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h > index 2105c6a5b458..47b0e31b7828 100644 > --- a/drivers/scsi/st.h > +++ b/drivers/scsi/st.h > @@ -178,6 +178,10 @@ struct scsi_tape { > int recover_count; /* From tape opening */ > int recover_reg; /* From last status call */ > > + /* The saved values of midlevel counters */ > + unsigned int new_media_ctr; > + unsigned int por_ctr; > + > #if DEBUG > unsigned char write_pending; > int nbr_finished;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index a0667a0ae4c9..ad86dfbc8919 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -163,9 +163,11 @@ static const char *st_formats[] = { static int debugging = DEBUG; +/* Setting these non-zero may risk recognizing resets */ #define MAX_RETRIES 0 #define MAX_WRITE_RETRIES 0 #define MAX_READY_RETRIES 0 + #define NO_TAPE NOT_READY #define ST_TIMEOUT (900 * HZ) @@ -357,10 +359,18 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) { int result = SRpnt->result; u8 scode; + unsigned int ctr; DEB(const char *stp;) char *name = STp->name; struct st_cmdstatus *cmdstatp; + ctr = scsi_get_ua_por_ctr(STp->device); + if (ctr != STp->por_ctr) { + STp->por_ctr = ctr; + STp->pos_unknown = 1; /* ASC => power on / reset */ + st_printk(KERN_WARNING, STp, "Power on/reset recognized."); + } + if (!result) return 0; @@ -413,10 +423,11 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) if (cmdstatp->have_sense && cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17) STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */ - if (cmdstatp->have_sense && scode == UNIT_ATTENTION && cmdstatp->sense_hdr.asc == 0x29) + if (cmdstatp->have_sense && scode == UNIT_ATTENTION && + cmdstatp->sense_hdr.asc == 0x29 && !STp->pos_unknown) { STp->pos_unknown = 1; /* ASC => power on / reset */ - - STp->pos_unknown |= STp->device->was_reset; + st_printk(KERN_WARNING, STp, "Power on/reset recognized."); + } if (cmdstatp->have_sense && scode == RECOVERED_ERROR @@ -968,6 +979,7 @@ static int test_ready(struct scsi_tape *STp, int do_wait) { int attentions, waits, max_wait, scode; int retval = CHKRES_READY, new_session = 0; + unsigned int ctr; unsigned char cmd[MAX_COMMAND_SIZE]; struct st_request *SRpnt = NULL; struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; @@ -1024,6 +1036,13 @@ static int test_ready(struct scsi_tape *STp, int do_wait) } } + ctr = scsi_get_ua_new_media_ctr(STp->device); + if (ctr != STp->new_media_ctr) { + STp->new_media_ctr = ctr; + new_session = 1; + DEBC_printk(STp, "New tape session."); + } + retval = (STp->buffer)->syscall_result; if (!retval) retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY; @@ -4394,6 +4413,9 @@ static int st_probe(struct device *dev) goto out_idr_remove; } + tpnt->new_media_ctr = scsi_get_ua_new_media_ctr(SDp); + tpnt->por_ctr = scsi_get_ua_por_ctr(SDp); + dev_set_drvdata(dev, tpnt); diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 2105c6a5b458..47b0e31b7828 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -178,6 +178,10 @@ struct scsi_tape { int recover_count; /* From tape opening */ int recover_reg; /* From last status call */ + /* The saved values of midlevel counters */ + unsigned int new_media_ctr; + unsigned int por_ctr; + #if DEBUG unsigned char write_pending; int nbr_finished;
Compare the stored values of por_ctr and new_media_ctr against the values in the device struct. In case of mismatch, the Unit Attention corresponding to the counter has happened. This is a safeguard against another ULD catching the Unit Attention sense data. Remove use of the was_reset flag in struct scsi_device. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> --- drivers/scsi/st.c | 28 +++++++++++++++++++++++++--- drivers/scsi/st.h | 4 ++++ 2 files changed, 29 insertions(+), 3 deletions(-)