diff mbox series

[v6,2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port

Message ID 20241125105747.6595-3-quic_mukhopad@quicinc.com
State New
Headers show
Series Enable Display Port for Qualcomm SA8775P-ride platform | expand

Commit Message

Soutrik Mukhopadhyay Nov. 25, 2024, 10:57 a.m. UTC 
The Qualcomm SA8775P platform comes with 2 DisplayPort controllers
for each mdss. edp0 and edp1 correspond to the DP controllers of
mdss0, whereas edp2 and edp3 correspond to the DP controllers of
mdss1. This change enables only the DP controllers, DPTX0 and DPTX1
alongside their corresponding PHYs of mdss0, which have been
validated.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 80 ++++++++++++++++++++++
 1 file changed, 80 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index adb71aeff339..2bc58a8991b9 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -27,6 +27,30 @@ 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "eDP0";
+		type = "full-size";
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	dp1-connector {
+		compatible = "dp-connector";
+		label = "eDP1";
+		type = "full-size";
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -421,6 +445,50 @@ 
 	status = "okay";
 };
 
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
 &pmm8654au_0_gpios {
 	gpio-line-names = "DS_EN",
 			  "POFF_COMPLETE",
@@ -527,6 +595,18 @@ 
 };
 
 &tlmm {
+	dp0_hot_plug_det: dp0-hot-plug-det-state {
+		pins = "gpio101";
+		function = "edp0_hot";
+		bias-disable;
+	};
+
+	dp1_hot_plug_det: dp1-hot-plug-det-state {
+		pins = "gpio102";
+		function = "edp1_hot";
+		bias-disable;
+	};
+
 	ethernet0_default: ethernet0-default-state {
 		ethernet0_mdc: ethernet0-mdc-pins {
 			pins = "gpio8";