| Message ID | 20241120154919.814593-1-pvorel@suse.cz |
|---|---|
| State | New |
| Headers | show |
| Series | [RFC,1/1] drm/msm: require python3 and xml.parsers.expat module | expand |
> On Wed, Nov 20, 2024 at 7:49 AM Petr Vorel <pvorel@suse.cz> wrote: > > 0fddd045f88e introduced python3 dependency, require it to quick early. > > Signed-off-by: Petr Vorel <pvorel@suse.cz> > > --- > > Hi all, > > RFC because I'm not sure if previous failed build wasn't better: > > GENHDR drivers/gpu/drm/msm/generated/a2xx.xml.h > > /bin/sh: python3: not found > > This way it's documented, but CONFIG_DRM_MSM just silently disappears > > from .config. Also because depends on $(success ..) is not evaluated > > (understand, some expressions can be really long) one see only: > > Depends on: n [=n]. > > I was thinking about testing via $(PYTHON3) -m "xml.parsers.expat", > > but because expat parser (and other modules) should be part the official > > python3 and are installed even on minimal python3 installations (e.g. > > python3-minimal on Debian). Therefore depending on "$(PYTHON3) -V" > > should be enough. > Would it be more clear to do something like: > config HAS_PYTHON3 > dev_bool $(success ...) > (in init/Kconfig or somewhere central) and then use 'depends on > HAS_PYTHON3'? That might make the dependency easier to see in > menuconfig/etc Thanks a lot, good idea, there are already few config HAVE_* in it. I'll send v2. Before I already noticed various variables in the top level Makefile (PERL, BASH, RUSTC, ...), but didn't find any check. Just now I noticed HAVE_RUST in arch/Kconfig. I suppose HAVE_PYTHON3 should be in init/Kconfig. Kind regards, Petr > BR, > -R > > Kind regards, > > Petr > > drivers/gpu/drm/msm/Kconfig | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig > > index 90c68106b63b..2cf4573a2ff1 100644 > > --- a/drivers/gpu/drm/msm/Kconfig > > +++ b/drivers/gpu/drm/msm/Kconfig > > @@ -11,6 +11,7 @@ config DRM_MSM > > depends on QCOM_LLCC || QCOM_LLCC=n > > depends on QCOM_COMMAND_DB || QCOM_COMMAND_DB=n > > depends on PM > > + depends on $(success,$(PYTHON3) -V) > > select IOMMU_IO_PGTABLE > > select QCOM_MDT_LOADER if ARCH_QCOM > > select REGULATOR > > @@ -36,7 +37,7 @@ config DRM_MSM > > select PM_GENERIC_DOMAINS > > select TRACE_GPU_MEM > > help > > - DRM/KMS driver for MSM/snapdragon. > > + DRM/KMS driver for MSM/snapdragon. Requires python3. > > config DRM_MSM_GPU_STATE > > bool > > -- > > 2.47.0
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig index 90c68106b63b..2cf4573a2ff1 100644 --- a/drivers/gpu/drm/msm/Kconfig +++ b/drivers/gpu/drm/msm/Kconfig @@ -11,6 +11,7 @@ config DRM_MSM depends on QCOM_LLCC || QCOM_LLCC=n depends on QCOM_COMMAND_DB || QCOM_COMMAND_DB=n depends on PM + depends on $(success,$(PYTHON3) -V) select IOMMU_IO_PGTABLE select QCOM_MDT_LOADER if ARCH_QCOM select REGULATOR @@ -36,7 +37,7 @@ config DRM_MSM select PM_GENERIC_DOMAINS select TRACE_GPU_MEM help - DRM/KMS driver for MSM/snapdragon. + DRM/KMS driver for MSM/snapdragon. Requires python3. config DRM_MSM_GPU_STATE bool
0fddd045f88e introduced python3 dependency, require it to quick early. Signed-off-by: Petr Vorel <pvorel@suse.cz> --- Hi all, RFC because I'm not sure if previous failed build wasn't better: GENHDR drivers/gpu/drm/msm/generated/a2xx.xml.h /bin/sh: python3: not found This way it's documented, but CONFIG_DRM_MSM just silently disappears from .config. Also because depends on $(success ..) is not evaluated (understand, some expressions can be really long) one see only: Depends on: n [=n]. I was thinking about testing via $(PYTHON3) -m "xml.parsers.expat", but because expat parser (and other modules) should be part the official python3 and are installed even on minimal python3 installations (e.g. python3-minimal on Debian). Therefore depending on "$(PYTHON3) -V" should be enough. Kind regards, Petr drivers/gpu/drm/msm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)