diff mbox series

[v2] Revert "usb: gadget: composite: fix OS descriptors w_value logic"

Message ID 20241113235433.20244-1-quic_eserrao@quicinc.com
State New
Headers show
Series [v2] Revert "usb: gadget: composite: fix OS descriptors w_value logic" | expand

Commit Message

Elson Roy Serrao Nov. 13, 2024, 11:54 p.m. UTC 
From: Michal Vrastil <michal.vrastil@hidglobal.com>

This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.

Fix installation of WinUSB driver using OS descriptors. Without the
fix the drivers are not installed correctly and the property
'DeviceInterfaceGUID' is missing on host side.

The original change was based on the assumption that the interface
number is in the high byte of wValue but it is in the low byte,
instead. Unfortunately, the fix is based on MS documentation which is
also wrong.

The actual USB request for OS descriptors (using USB analyzer) looks
like:

Offset  0   1   2   3   4   5   6   7
0x000   C1  A1  02  00  05  00  0A  00

C1: bmRequestType (device to host, vendor, interface)
A1: nas magic number
0002: wValue (2: nas interface)
0005: wIndex (5: get extended property i.e. nas interface GUID)
008E: wLength (142)

The fix was tested on Windows 10 and Windows 11.

Cc: stable@vger.kernel.org
Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic")
Signed-off-by: Michal Vrastil <michal.vrastil@hidglobal.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
Changes in v2:
 - Added comments to explain wValue byte ordering discrepancy in MS OS
   Descriptor Spec.
 - Link to v1: https://lore.kernel.org/all/9918669c-3bfd-4d42-93c4-218e9364b7cc@quicinc.com/T/

 drivers/usb/gadget/composite.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 0e151b54aae8..9225c21d1184 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -2111,8 +2111,20 @@  composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			memset(buf, 0, w_length);
 			buf[5] = 0x01;
 			switch (ctrl->bRequestType & USB_RECIP_MASK) {
+			/*
+			 * The Microsoft CompatID OS Descriptor Spec(w_index = 0x4) and
+			 * Extended Prop OS Desc Spec(w_index = 0x5) state that the
+			 * HighByte of wValue is the InterfaceNumber and the LowByte is
+			 * the PageNumber. This high/low byte ordering is incorrectly
+			 * documented in the Spec. USB analyzer output on the below
+			 * request packets show the high/low byte inverted i.e LowByte
+			 * is the InterfaceNumber and the HighByte is the PageNumber.
+			 * Since we dont support >64KB CompatID/ExtendedProp descriptors,
+			 * PageNumber is set to 0. Hence verify that the HighByte is 0
+			 * for below two cases.
+			 */
 			case USB_RECIP_DEVICE:
-				if (w_index != 0x4 || (w_value & 0xff))
+				if (w_index != 0x4 || (w_value >> 8))
 					break;
 				buf[6] = w_index;
 				/* Number of ext compat interfaces */
@@ -2128,9 +2140,9 @@  composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 				}
 				break;
 			case USB_RECIP_INTERFACE:
-				if (w_index != 0x5 || (w_value & 0xff))
+				if (w_index != 0x5 || (w_value >> 8))
 					break;
-				interface = w_value >> 8;
+				interface = w_value & 0xFF;
 				if (interface >= MAX_CONFIG_INTERFACES ||
 				    !os_desc_cfg->interface[interface])
 					break;