diff mbox series

[v2,5/8] arm64: dts: renesas: rzg3s-smarc: Fix the debug serial alias

Message ID 20241108100513.2814957-6-claudiu.beznea.uj@bp.renesas.com
State Superseded
Headers show
Series Add support for the rest of Renesas RZ/G3S serial interfaces | expand

Commit Message

Claudiu Beznea Nov. 8, 2024, 10:05 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The debug serial of the RZ/G3S is SCIF0 which is routed on the Renesas
RZ SMARC Carrier II board on the SER3_UART. Use serial3 alias for it for
better hardware description. Along with it, the chosen properties were
moved to the device tree corresponding to the RZ SMARC Carrier II board.

Fixes: adb4f0c5699c ("arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM")
Fixes: d1ae4200bb26 ("arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- none

 arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi | 5 -----
 arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi     | 7 ++++++-
 2 files changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 2ed01d391554..55c72c8a0735 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -43,11 +43,6 @@  aliases {
 #endif
 	};
 
-	chosen {
-		bootargs = "ignore_loglevel";
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory@48000000 {
 		device_type = "memory";
 		/* First 128MB is reserved for secure area. */
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index 4509151344c4..33b9873b225a 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -12,10 +12,15 @@ 
 / {
 	aliases {
 		i2c0 = &i2c0;
-		serial0 = &scif0;
+		serial3 = &scif0;
 		mmc1 = &sdhi1;
 	};
 
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial3:115200n8";
+	};
+
 	keys {
 		compatible = "gpio-keys";