diff mbox series

[v5,1/7] dt-bindings: ufs: Document Rockchip UFS host controller

Message ID 1731048987-229149-2-git-send-email-shawn.lin@rock-chips.com
State New
Headers show
Series Initial support for RK3576 UFS controller | expand

Commit Message

Shawn Lin Nov. 8, 2024, 6:56 a.m. UTC 
Document Rockchip UFS host controller for RK3576 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v5:
- use ufshc for devicetree example suggested by Mani

Changes in v4:
- properly describe reset-gpios

Changes in v3:
- rename the file to rockchip,rk3576-ufshc.yaml
- add description for reset-gpios
- use rockchip,rk3576-ufshc as compatible

Changes in v2:
- rename the file
- add reset-gpios

 .../bindings/ufs/rockchip,rk3576-ufshc.yaml        | 105 +++++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml b/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
new file mode 100644
index 0000000..7d6c038
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
@@ -0,0 +1,105 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/rockchip,rk3576-ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip UFS Host Controller
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    const: rockchip,rk3576-ufshc
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: hci
+      - const: mphy
+      - const: hci_grf
+      - const: mphy_grf
+      - const: hci_apb
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: pclk
+      - const: pclk_mphy
+      - const: ref_out
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: biu
+      - const: sys
+      - const: ufs
+      - const: grf
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+      GPIO specifiers for host to reset the whole UFS device including PHY and
+      memory. This gpio is active low and should choose the one whose high output
+      voltage is lower than 1.5V based on the UFS spec.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - resets
+  - reset-names
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3576-cru.h>
+    #include <dt-bindings/reset/rockchip,rk3576-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rockchip,rk3576-power.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufshc: ufshc@2a2d0000 {
+              compatible = "rockchip,rk3576-ufshc";
+              reg = <0x0 0x2a2d0000 0x0 0x10000>,
+                    <0x0 0x2b040000 0x0 0x10000>,
+                    <0x0 0x2601f000 0x0 0x1000>,
+                    <0x0 0x2603c000 0x0 0x1000>,
+                    <0x0 0x2a2e0000 0x0 0x10000>;
+              reg-names = "hci", "mphy", "hci_grf", "mphy_grf", "hci_apb";
+              clocks = <&cru ACLK_UFS_SYS>, <&cru PCLK_USB_ROOT>, <&cru PCLK_MPHY>,
+                      <&cru CLK_REF_UFS_CLKOUT>;
+              clock-names = "core", "pclk", "pclk_mphy", "ref_out";
+              interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+              power-domains = <&power RK3576_PD_USB>;
+              resets = <&cru SRST_A_UFS_BIU>, <&cru SRST_A_UFS_SYS>, <&cru SRST_A_UFS>,
+                        <&cru SRST_P_UFS_GRF>;
+              reset-names = "biu", "sys", "ufs", "grf";
+              reset-gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+        };
+    };