diff mbox series

[v8,12/17] media: platform: Fill stats buffer on ISP_START

Message ID 20241106100534.768400-13-dan.scally@ideasonboard.com
State New
Headers show
Series Add Arm Mali-C55 Image Signal Processor Driver | expand

Commit Message

Dan Scally Nov. 6, 2024, 10:05 a.m. UTC 
On ISP_START, fill the stats buffer by reading out the metering space
in the ISP's memory. This is done for the non-active config just as
the dma transfer of the registers is. To acheive that, move the
checking of the current config outside of mali_c55_swap_next_config()
so we can use it for both functions.

Acked-by: Nayden Kanchev  <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
---
Changes in v8:

	- None

Changes in v7:

	- Reworked how the config is swapped on ISP start

Changes in v6:

	- None

Changes in v5:

	- New patch

 .../platform/arm/mali-c55/mali-c55-core.c     | 23 ++++++++++++++-----
 1 file changed, 17 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index b225d41f8000..8c6cae9a3a4d 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -625,12 +625,6 @@  static int mali_c55_check_hwcfg(struct mali_c55 *mali_c55)
 static void mali_c55_swap_next_config(struct mali_c55 *mali_c55)
 {
 	struct mali_c55_context *ctx = mali_c55_get_active_context(mali_c55);
-	u32 curr_config;
-
-	curr_config = mali_c55_read(mali_c55, MALI_C55_REG_PING_PONG_READ);
-	curr_config = (curr_config & MALI_C55_REG_PING_PONG_READ_MASK)
-		      >> (ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1);
-	mali_c55->next_config = curr_config ^ 1;
 
 	mali_c55_config_write(ctx, mali_c55->next_config ?
 			      MALI_C55_CONFIG_PING : MALI_C55_CONFIG_PONG,
@@ -651,6 +645,7 @@  static irqreturn_t mali_c55_isr(int irq, void *context)
 	struct device *dev = context;
 	struct mali_c55 *mali_c55 = dev_get_drvdata(dev);
 	u32 interrupt_status;
+	u32 curr_config;
 	unsigned int i;
 
 	interrupt_status = mali_c55_read(mali_c55,
@@ -675,6 +670,22 @@  static irqreturn_t mali_c55_isr(int irq, void *context)
 			if (mali_c55->capabilities & MALI_C55_GPS_DS_PIPE_FITTED)
 				mali_c55_set_next_buffer(&mali_c55->cap_devs[MALI_C55_CAP_DEV_DS]);
 
+			/*
+			 * When the ISP starts a frame we have some work to do:
+			 *
+			 * 1. Copy over the config for the **next** frame
+			 * 2. Read out the metering stats for the **last** frame
+			 */
+
+			curr_config = mali_c55_read(mali_c55,
+						    MALI_C55_REG_PING_PONG_READ);
+			curr_config &= MALI_C55_REG_PING_PONG_READ_MASK;
+			curr_config >>= ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1;
+			mali_c55->next_config = curr_config ^ 1;
+
+			mali_c55_stats_fill_buffer(mali_c55,
+				mali_c55->next_config ? MALI_C55_CONFIG_PING :
+				MALI_C55_CONFIG_PONG);
 			mali_c55_swap_next_config(mali_c55);
 
 			break;