| Message ID | 20241108045337.292905-6-jdamato@fastly.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Suspend IRQs during application busy periods | expand |
Joe Damato wrote: > Add an epoll busy poll test using netdevsim. > > This test is comprised of: > - busy_poller (via busy_poller.c) > - busy_poll_test.sh which loads netdevsim, sets up network namespaces, > and runs busy_poller to receive data and socat to send data. > > The selftest tests two different scenarios: > - busy poll (the pre-existing version in the kernel) > - busy poll with suspend enabled (what this series adds) > > The data transmit is a 1MiB temporary file generated from /dev/urandom > and the test is considered passing if the md5sum of the input file to > socat matches the md5sum of the output file from busy_poller. Nice test. Busy polling does not affect data integrity. Is the goal of this test mainly to get coverage, maybe observe if the process would stall indefinitely? > netdevsim was chosen instead of veth due to netdevsim's support for > netdev-genl. > > For now, this test uses the functionality that netdevsim provides. In the > future, perhaps netdevsim can be extended to emulate device IRQs to more > thoroughly test all pre-existing kernel options (like defer_hard_irqs) > and suspend. > > Signed-off-by: Joe Damato <jdamato@fastly.com> > Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca> > Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> > Acked-by: Stanislav Fomichev <sdf@fomichev.me> > --- > v5: > - Updated commit message to replace netcat with socat and fixed > misspelling of netdevsim. No functional/code changes. > > v4: > - Updated busy_poll_test.sh: > - use socat instead of nc > - drop cli.py usage from the script > - removed check_ynl > - Updated busy_poller.c: > - use netlink to configure napi parameters > > v3: > - New in v3 > > tools/testing/selftests/net/.gitignore | 1 + > tools/testing/selftests/net/Makefile | 3 +- > tools/testing/selftests/net/busy_poll_test.sh | 164 +++++++++ > tools/testing/selftests/net/busy_poller.c | 328 ++++++++++++++++++ > 4 files changed, 495 insertions(+), 1 deletion(-) > create mode 100755 tools/testing/selftests/net/busy_poll_test.sh > create mode 100644 tools/testing/selftests/net/busy_poller.c > > diff --git a/tools/testing/selftests/net/busy_poll_test.sh b/tools/testing/selftests/net/busy_poll_test.sh > new file mode 100755 > index 000000000000..ffc74bc62e5a > --- /dev/null > +++ b/tools/testing/selftests/net/busy_poll_test.sh > @@ -0,0 +1,164 @@ > +#!/bin/bash > +# SPDX-License-Identifier: GPL-2.0-only Why the different SPDX between the two files? > +source net_helper.sh > + > +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) > +NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_1_ID > +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) > +NSIM_DEV_2_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_2_ID > + > +NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device > +NSIM_DEV_SYS_DEL=/sys/bus/netdevsim/del_device > +NSIM_DEV_SYS_LINK=/sys/bus/netdevsim/link_device > +NSIM_DEV_SYS_UNLINK=/sys/bus/netdevsim/unlink_device > + > +setup_ns() > +{ > + set -e > + ip netns add nssv > + ip netns add nscl > + > + NSIM_DEV_1_NAME=$(find $NSIM_DEV_1_SYS/net -maxdepth 1 -type d ! \ > + -path $NSIM_DEV_1_SYS/net -exec basename {} \;) > + NSIM_DEV_2_NAME=$(find $NSIM_DEV_2_SYS/net -maxdepth 1 -type d ! \ > + -path $NSIM_DEV_2_SYS/net -exec basename {} \;) > + > + # ensure the server has 1 queue > + ethtool -L $NSIM_DEV_1_NAME combined 1 2>/dev/null > + > + ip link set $NSIM_DEV_1_NAME netns nssv > + ip link set $NSIM_DEV_2_NAME netns nscl > + > + ip netns exec nssv ip addr add '192.168.1.1/24' dev $NSIM_DEV_1_NAME > + ip netns exec nscl ip addr add '192.168.1.2/24' dev $NSIM_DEV_2_NAME > + > + ip netns exec nssv ip link set dev $NSIM_DEV_1_NAME up > + ip netns exec nscl ip link set dev $NSIM_DEV_2_NAME up > + > + set +e > +} > + > +cleanup_ns() > +{ > + ip netns del nscl > + ip netns del nssv > +} > + > +test_busypoll() > +{ > + tmp_file=$(mktemp) > + out_file=$(mktemp) > + > + # fill a test file with random data > + dd if=/dev/urandom of=${tmp_file} bs=1M count=1 2> /dev/null > + > + timeout -k 1s 30s ip netns exec nssv ./busy_poller -p48675 -b192.168.1.1 -m8 -u0 -P1 -g16 -i${NSIM_DEV_1_IFIDX} -o${out_file}& nit: consider variables for all repeated constants, including IP addresses and ports > + > + wait_local_port_listen nssv 48675 tcp > + > + ip netns exec nscl socat -u $tmp_file TCP:192.168.1.1:48675 > + > + wait > + > + tmp_file_md5sum=$(md5sum $tmp_file | cut -f1 -d' ') > + out_file_md5sum=$(md5sum $out_file | cut -f1 -d' ') > + > + if [ "$tmp_file_md5sum" = "$out_file_md5sum" ]; then > + res=0 > + else > + echo "md5sum mismatch" > + echo "input file md5sum: ${tmp_file_md5sum}"; > + echo "output file md5sum: ${out_file_md5sum}"; > + res=1 > + fi > + > + rm $out_file $tmp_file Delete these in cleanup()? > + > + return $res > +} > + > +test_busypoll_with_suspend() > +{ Main feedback: this function is practically a duplicate of the prev. Consider deduplicating them with one optional argument that enables suspend mode in busy_poller. > + tmp_file=$(mktemp) > + out_file=$(mktemp) > + > + # fill a test file with random data > + dd if=/dev/urandom of=${tmp_file} bs=1M count=1 2> /dev/null > + > + timeout -k 1s 30s ip netns exec nssv ./busy_poller -p48675 -b192.168.1.1 -m8 -u0 -P1 -g16 -d100 -r50000 -s20000000 -i${NSIM_DEV_1_IFIDX} -o${out_file}& > + > + wait_local_port_listen nssv 48675 tcp > + > + ip netns exec nscl socat -u $tmp_file TCP:192.168.1.1:48675 > + > + wait > + > + tmp_file_md5sum=$(md5sum $tmp_file | cut -f1 -d' ') > + out_file_md5sum=$(md5sum $out_file | cut -f1 -d' ') > + > + if [ "$tmp_file_md5sum" = "$out_file_md5sum" ]; then > + res=0 > + else > + echo "md5sum mismatch" > + echo "input file md5sum: ${tmp_file_md5sum}"; > + echo "output file md5sum: ${out_file_md5sum}"; > + res=1 > + fi > + > + rm $out_file $tmp_file > + > + return $res > +} > + > +### > +### Code start > +### > + > +modprobe netdevsim > + > +# linking > + > +echo $NSIM_DEV_1_ID > $NSIM_DEV_SYS_NEW > +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_NEW > +udevadm settle is this generally available on systems under test? > + > +setup_ns > + > +NSIM_DEV_1_FD=$((256 + RANDOM % 256)) repeated magic constants > +exec {NSIM_DEV_1_FD}</var/run/netns/nssv > +NSIM_DEV_1_IFIDX=$(ip netns exec nssv cat /sys/class/net/$NSIM_DEV_1_NAME/ifindex) > + > +NSIM_DEV_2_FD=$((256 + RANDOM % 256)) > +exec {NSIM_DEV_2_FD}</var/run/netns/nscl > +NSIM_DEV_2_IFIDX=$(ip netns exec nscl cat /sys/class/net/$NSIM_DEV_2_NAME/ifindex) > + > +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:$NSIM_DEV_2_IFIDX" > $NSIM_DEV_SYS_LINK > +if [ $? -ne 0 ]; then > + echo "linking netdevsim1 with netdevsim2 should succeed" > + cleanup_ns > + exit 1 > +fi > + > +test_busypoll > +if [ $? -ne 0 ]; then > + echo "test_busypoll failed" > + cleanup_ns > + exit 1 > +fi > + > +test_busypoll_with_suspend > +if [ $? -ne 0 ]; then > + echo "test_busypoll_with_suspend failed" > + cleanup_ns > + exit 1 > +fi > + > +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX" > $NSIM_DEV_SYS_UNLINK > + > +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_DEL > + > +cleanup_ns > + > +modprobe -r netdevsim > + > +exit 0 > diff --git a/tools/testing/selftests/net/busy_poller.c b/tools/testing/selftests/net/busy_poller.c > new file mode 100644 > index 000000000000..8d8aa9e5939a > --- /dev/null > +++ b/tools/testing/selftests/net/busy_poller.c > @@ -0,0 +1,328 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include <assert.h> > +#include <errno.h> > +#include <error.h> > +#include <fcntl.h> > +#include <inttypes.h> > +#include <limits.h> > +#include <stdlib.h> > +#include <stdio.h> > +#include <string.h> > +#include <unistd.h> > + > +#include <arpa/inet.h> > +#include <netinet/in.h> > + > +#include <sys/ioctl.h> > +#include <sys/epoll.h> > +#include <sys/socket.h> > +#include <sys/types.h> > + > +#include <linux/netlink.h> > +#include <linux/genetlink.h> > +#include "netdev-user.h" > +#include <ynl.h> > + > +/* if the headers haven't been updated, we need to define some things */ This should not be needed, as headers are taken from $KERNELSRC/usr after make headers_install. Generally discouraged for tests (else every new feature test for a new features is forced to adds such checks). > +#if !defined(EPOLL_IOC_TYPE) > +struct epoll_params { > + uint32_t busy_poll_usecs; > + uint16_t busy_poll_budget; > + uint8_t prefer_busy_poll; > + > + /* pad the struct to a multiple of 64bits */ > + uint8_t __pad; > +}; > + > +#define EPOLL_IOC_TYPE 0x8A > +#define EPIOCSPARAMS _IOW(EPOLL_IOC_TYPE, 0x01, struct epoll_params) > +#define EPIOCGPARAMS _IOR(EPOLL_IOC_TYPE, 0x02, struct epoll_params) > +#endif > + > +static uint32_t cfg_port = 8000; > +static struct in_addr cfg_bind_addr = { .s_addr = INADDR_ANY }; > +static char *cfg_outfile; > +static int cfg_max_events = 8; > +static int cfg_ifindex; > + > +/* busy poll params */ > +static uint32_t cfg_busy_poll_usecs; > +static uint16_t cfg_busy_poll_budget; > +static uint8_t cfg_prefer_busy_poll; > + > +/* IRQ params */ > +static uint32_t cfg_defer_hard_irqs; > +static uint64_t cfg_gro_flush_timeout; > +static uint64_t cfg_irq_suspend_timeout; > + > +static void usage(const char *filepath) > +{ > + error(1, 0, > + "Usage: %s -p<port> -b<addr> -m<max_events> -u<busy_poll_usecs> -P<prefer_busy_poll> -g<busy_poll_budget> -o<outfile> -d<defer_hard_irqs> -r<gro_flush_timeout> -s<irq_suspend_timeout> -i<ifindex>", > + filepath); > +} > + > +static void parse_opts(int argc, char **argv) > +{ > + int ret; > + int c; > + > + if (argc <= 1) > + usage(argv[0]); > + > + while ((c = getopt(argc, argv, "p:m:b:u:P:g:o:d:r:s:i:")) != -1) { > + switch (c) { > + case 'u': > + cfg_busy_poll_usecs = strtoul(optarg, NULL, 0); > + if (cfg_busy_poll_usecs == ULONG_MAX || > + cfg_busy_poll_usecs > UINT32_MAX) > + error(1, ERANGE, "busy_poll_usecs too large"); > + break; > + case 'P': > + cfg_prefer_busy_poll = strtoul(optarg, NULL, 0); > + if (cfg_prefer_busy_poll == ULONG_MAX || Here and elsewhere: not possible due to size of var (here: uint8_t) I'm surprised that the compiler does not mention this. > + cfg_prefer_busy_poll > 1) > + error(1, ERANGE, > + "prefer busy poll should be 0 or 1"); > + break; > + case 'g': > + cfg_busy_poll_budget = strtoul(optarg, NULL, 0); > + if (cfg_busy_poll_budget == ULONG_MAX || > + cfg_busy_poll_budget > UINT16_MAX) > + error(1, ERANGE, > + "busy poll budget must be [0, UINT16_MAX]"); > + break; > + case 'p': > + cfg_port = strtoul(optarg, NULL, 0); > + if (cfg_port > UINT16_MAX) > + error(1, ERANGE, "port must be <= 65535"); > + break; > + case 'b': > + ret = inet_aton(optarg, &cfg_bind_addr); > + if (ret == 0) > + error(1, errno, > + "bind address %s invalid", optarg); > + break; > + case 'o': > + cfg_outfile = strdup(optarg); > + if (!cfg_outfile) > + error(1, 0, "outfile invalid"); > + break; > + case 'm': > + cfg_max_events = strtol(optarg, NULL, 0); > + > + if (cfg_max_events == LONG_MIN || > + cfg_max_events == LONG_MAX || > + cfg_max_events <= 0) > + error(1, ERANGE, > + "max events must be > 0 and < LONG_MAX"); > + break; > + case 'd': > + cfg_defer_hard_irqs = strtoul(optarg, NULL, 0); > + > + if (cfg_defer_hard_irqs == ULONG_MAX || > + cfg_defer_hard_irqs > INT32_MAX) > + error(1, ERANGE, > + "defer_hard_irqs must be <= INT32_MAX"); > + break; > + case 'r': > + cfg_gro_flush_timeout = strtoull(optarg, NULL, 0); > + > + if (cfg_gro_flush_timeout == ULLONG_MAX) > + error(1, ERANGE, > + "gro_flush_timeout must be < ULLONG_MAX"); > + break; > + case 's': > + cfg_irq_suspend_timeout = strtoull(optarg, NULL, 0); > + > + if (cfg_irq_suspend_timeout == ULLONG_MAX) > + error(1, ERANGE, > + "irq_suspend_timeout must be < ULLONG_MAX"); > + break; > + case 'i': > + cfg_ifindex = strtoul(optarg, NULL, 0); > + if (cfg_ifindex == ULONG_MAX) > + error(1, ERANGE, > + "ifindex must be < ULONG_MAX"); > + break; > + } > + } > + > + if (!cfg_ifindex) > + usage(argv[0]); > + > + if (optind != argc) > + usage(argv[0]); > +}
On Fri, Nov 08, 2024 at 09:57:48AM -0500, Willem de Bruijn wrote: > Joe Damato wrote: > > Add an epoll busy poll test using netdevsim. > > > > This test is comprised of: > > - busy_poller (via busy_poller.c) > > - busy_poll_test.sh which loads netdevsim, sets up network namespaces, > > and runs busy_poller to receive data and socat to send data. > > > > The selftest tests two different scenarios: > > - busy poll (the pre-existing version in the kernel) > > - busy poll with suspend enabled (what this series adds) > > > > The data transmit is a 1MiB temporary file generated from /dev/urandom > > and the test is considered passing if the md5sum of the input file to > > socat matches the md5sum of the output file from busy_poller. > > Nice test. > > Busy polling does not affect data integrity. Is the goal of this test > mainly to get coverage, maybe observe if the process would stall > indefinitely? Just to get coverage and make sure data makes it from point A to point B intact despite suspend being enabled. The last paragraph of the commit message highlights that netdevsim functionality is limited, so the test uses what is available. It can be extended in the future, when netdevsim supports more functionality. Paolo wanted a test and this is the best test we can provide given the limitations of the testing environment. > > netdevsim was chosen instead of veth due to netdevsim's support for > > netdev-genl. > > > > For now, this test uses the functionality that netdevsim provides. In the > > future, perhaps netdevsim can be extended to emulate device IRQs to more > > thoroughly test all pre-existing kernel options (like defer_hard_irqs) > > and suspend. [...] The rest of the feedback below seems pretty minor; I don't think it's worth spinning a v9 and re-sending just for this. If anything this can be handled with a clean up commit in the future. Jakub: please let me know if you prefer to see a v9 for this? > > diff --git a/tools/testing/selftests/net/busy_poll_test.sh b/tools/testing/selftests/net/busy_poll_test.sh > > new file mode 100755 > > index 000000000000..ffc74bc62e5a > > --- /dev/null > > +++ b/tools/testing/selftests/net/busy_poll_test.sh > > @@ -0,0 +1,164 @@ > > +#!/bin/bash > > +# SPDX-License-Identifier: GPL-2.0-only > > Why the different SPDX between the two files? > > > +source net_helper.sh > > + > > +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) > > +NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_1_ID > > +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) > > +NSIM_DEV_2_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_2_ID > > + > > +NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device > > +NSIM_DEV_SYS_DEL=/sys/bus/netdevsim/del_device > > +NSIM_DEV_SYS_LINK=/sys/bus/netdevsim/link_device > > +NSIM_DEV_SYS_UNLINK=/sys/bus/netdevsim/unlink_device > > + > > +setup_ns() > > +{ > > + set -e > > + ip netns add nssv > > + ip netns add nscl > > + > > + NSIM_DEV_1_NAME=$(find $NSIM_DEV_1_SYS/net -maxdepth 1 -type d ! \ > > + -path $NSIM_DEV_1_SYS/net -exec basename {} \;) > > + NSIM_DEV_2_NAME=$(find $NSIM_DEV_2_SYS/net -maxdepth 1 -type d ! \ > > + -path $NSIM_DEV_2_SYS/net -exec basename {} \;) > > + > > + # ensure the server has 1 queue > > + ethtool -L $NSIM_DEV_1_NAME combined 1 2>/dev/null > > + > > + ip link set $NSIM_DEV_1_NAME netns nssv > > + ip link set $NSIM_DEV_2_NAME netns nscl > > + > > + ip netns exec nssv ip addr add '192.168.1.1/24' dev $NSIM_DEV_1_NAME > > + ip netns exec nscl ip addr add '192.168.1.2/24' dev $NSIM_DEV_2_NAME > > + > > + ip netns exec nssv ip link set dev $NSIM_DEV_1_NAME up > > + ip netns exec nscl ip link set dev $NSIM_DEV_2_NAME up > > + > > + set +e > > +} > > + > > +cleanup_ns() > > +{ > > + ip netns del nscl > > + ip netns del nssv > > +} > > + > > +test_busypoll() > > +{ > > + tmp_file=$(mktemp) > > + out_file=$(mktemp) > > + > > + # fill a test file with random data > > + dd if=/dev/urandom of=${tmp_file} bs=1M count=1 2> /dev/null > > + > > + timeout -k 1s 30s ip netns exec nssv ./busy_poller -p48675 -b192.168.1.1 -m8 -u0 -P1 -g16 -i${NSIM_DEV_1_IFIDX} -o${out_file}& > > nit: consider variables for all repeated constants, including IP addresses and ports > > + > > + wait_local_port_listen nssv 48675 tcp > > + > > + ip netns exec nscl socat -u $tmp_file TCP:192.168.1.1:48675 > > + > > + wait > > + > > + tmp_file_md5sum=$(md5sum $tmp_file | cut -f1 -d' ') > > + out_file_md5sum=$(md5sum $out_file | cut -f1 -d' ') > > + > > + if [ "$tmp_file_md5sum" = "$out_file_md5sum" ]; then > > + res=0 > > + else > > + echo "md5sum mismatch" > > + echo "input file md5sum: ${tmp_file_md5sum}"; > > + echo "output file md5sum: ${out_file_md5sum}"; > > + res=1 > > + fi > > + > > + rm $out_file $tmp_file > > Delete these in cleanup()? > > > + > > + return $res > > +} > > + > > +test_busypoll_with_suspend() > > +{ > > Main feedback: this function is practically a duplicate of the prev. > Consider deduplicating them with one optional argument that enables > suspend mode in busy_poller. > > > + tmp_file=$(mktemp) > > + out_file=$(mktemp) > > + > > + # fill a test file with random data > > + dd if=/dev/urandom of=${tmp_file} bs=1M count=1 2> /dev/null > > + > > + timeout -k 1s 30s ip netns exec nssv ./busy_poller -p48675 -b192.168.1.1 -m8 -u0 -P1 -g16 -d100 -r50000 -s20000000 -i${NSIM_DEV_1_IFIDX} -o${out_file}& > > + > > + wait_local_port_listen nssv 48675 tcp > > + > > + ip netns exec nscl socat -u $tmp_file TCP:192.168.1.1:48675 > > + > > + wait > > + > > + tmp_file_md5sum=$(md5sum $tmp_file | cut -f1 -d' ') > > + out_file_md5sum=$(md5sum $out_file | cut -f1 -d' ') > > + > > + if [ "$tmp_file_md5sum" = "$out_file_md5sum" ]; then > > + res=0 > > + else > > + echo "md5sum mismatch" > > + echo "input file md5sum: ${tmp_file_md5sum}"; > > + echo "output file md5sum: ${out_file_md5sum}"; > > + res=1 > > + fi > > + > > + rm $out_file $tmp_file > > + > > + return $res > > +} > > + > > +### > > +### Code start > > +### > > + > > +modprobe netdevsim > > + > > +# linking > > + > > +echo $NSIM_DEV_1_ID > $NSIM_DEV_SYS_NEW > > +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_NEW > > +udevadm settle > > is this generally available on systems under test? > > > + > > +setup_ns > > + > > +NSIM_DEV_1_FD=$((256 + RANDOM % 256)) > > repeated magic constants > > > +exec {NSIM_DEV_1_FD}</var/run/netns/nssv > > +NSIM_DEV_1_IFIDX=$(ip netns exec nssv cat /sys/class/net/$NSIM_DEV_1_NAME/ifindex) > > + > > +NSIM_DEV_2_FD=$((256 + RANDOM % 256)) > > +exec {NSIM_DEV_2_FD}</var/run/netns/nscl > > +NSIM_DEV_2_IFIDX=$(ip netns exec nscl cat /sys/class/net/$NSIM_DEV_2_NAME/ifindex) > > + > > +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:$NSIM_DEV_2_IFIDX" > $NSIM_DEV_SYS_LINK > > +if [ $? -ne 0 ]; then > > + echo "linking netdevsim1 with netdevsim2 should succeed" > > + cleanup_ns > > + exit 1 > > +fi > > + > > +test_busypoll > > +if [ $? -ne 0 ]; then > > + echo "test_busypoll failed" > > + cleanup_ns > > + exit 1 > > +fi > > + > > +test_busypoll_with_suspend > > +if [ $? -ne 0 ]; then > > + echo "test_busypoll_with_suspend failed" > > + cleanup_ns > > + exit 1 > > +fi > > + > > +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX" > $NSIM_DEV_SYS_UNLINK > > + > > +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_DEL > > + > > +cleanup_ns > > + > > +modprobe -r netdevsim > > + > > +exit 0 > > diff --git a/tools/testing/selftests/net/busy_poller.c b/tools/testing/selftests/net/busy_poller.c > > new file mode 100644 > > index 000000000000..8d8aa9e5939a > > --- /dev/null > > +++ b/tools/testing/selftests/net/busy_poller.c > > @@ -0,0 +1,328 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +#include <assert.h> > > +#include <errno.h> > > +#include <error.h> > > +#include <fcntl.h> > > +#include <inttypes.h> > > +#include <limits.h> > > +#include <stdlib.h> > > +#include <stdio.h> > > +#include <string.h> > > +#include <unistd.h> > > + > > +#include <arpa/inet.h> > > +#include <netinet/in.h> > > + > > +#include <sys/ioctl.h> > > +#include <sys/epoll.h> > > +#include <sys/socket.h> > > +#include <sys/types.h> > > + > > +#include <linux/netlink.h> > > +#include <linux/genetlink.h> > > +#include "netdev-user.h" > > +#include <ynl.h> > > + > > +/* if the headers haven't been updated, we need to define some things */ > > This should not be needed, as headers are taken from $KERNELSRC/usr after > make headers_install. > > Generally discouraged for tests (else every new feature test for a new > features is forced to adds such checks). > > > +#if !defined(EPOLL_IOC_TYPE) > > +struct epoll_params { > > + uint32_t busy_poll_usecs; > > + uint16_t busy_poll_budget; > > + uint8_t prefer_busy_poll; > > + > > + /* pad the struct to a multiple of 64bits */ > > + uint8_t __pad; > > +}; > > + > > +#define EPOLL_IOC_TYPE 0x8A > > +#define EPIOCSPARAMS _IOW(EPOLL_IOC_TYPE, 0x01, struct epoll_params) > > +#define EPIOCGPARAMS _IOR(EPOLL_IOC_TYPE, 0x02, struct epoll_params) > > +#endif > > + > > +static uint32_t cfg_port = 8000; > > +static struct in_addr cfg_bind_addr = { .s_addr = INADDR_ANY }; > > +static char *cfg_outfile; > > +static int cfg_max_events = 8; > > +static int cfg_ifindex; > > + > > +/* busy poll params */ > > +static uint32_t cfg_busy_poll_usecs; > > +static uint16_t cfg_busy_poll_budget; > > +static uint8_t cfg_prefer_busy_poll; > > + > > +/* IRQ params */ > > +static uint32_t cfg_defer_hard_irqs; > > +static uint64_t cfg_gro_flush_timeout; > > +static uint64_t cfg_irq_suspend_timeout; > > + > > +static void usage(const char *filepath) > > +{ > > + error(1, 0, > > + "Usage: %s -p<port> -b<addr> -m<max_events> -u<busy_poll_usecs> -P<prefer_busy_poll> -g<busy_poll_budget> -o<outfile> -d<defer_hard_irqs> -r<gro_flush_timeout> -s<irq_suspend_timeout> -i<ifindex>", > > + filepath); > > +} > > + > > +static void parse_opts(int argc, char **argv) > > +{ > > + int ret; > > + int c; > > + > > + if (argc <= 1) > > + usage(argv[0]); > > + > > + while ((c = getopt(argc, argv, "p:m:b:u:P:g:o:d:r:s:i:")) != -1) { > > + switch (c) { > > + case 'u': > > + cfg_busy_poll_usecs = strtoul(optarg, NULL, 0); > > + if (cfg_busy_poll_usecs == ULONG_MAX || > > + cfg_busy_poll_usecs > UINT32_MAX) > > + error(1, ERANGE, "busy_poll_usecs too large"); > > + break; > > + case 'P': > > + cfg_prefer_busy_poll = strtoul(optarg, NULL, 0); > > + if (cfg_prefer_busy_poll == ULONG_MAX || > > Here and elsewhere: not possible due to size of var (here: uint8_t) > I'm surprised that the compiler does not mention this. > > > + cfg_prefer_busy_poll > 1) > > + error(1, ERANGE, > > + "prefer busy poll should be 0 or 1"); > > + break; > > + case 'g': > > + cfg_busy_poll_budget = strtoul(optarg, NULL, 0); > > + if (cfg_busy_poll_budget == ULONG_MAX || > > + cfg_busy_poll_budget > UINT16_MAX) > > + error(1, ERANGE, > > + "busy poll budget must be [0, UINT16_MAX]"); > > + break; > > + case 'p': > > + cfg_port = strtoul(optarg, NULL, 0); > > + if (cfg_port > UINT16_MAX) > > + error(1, ERANGE, "port must be <= 65535"); > > + break; > > + case 'b': > > + ret = inet_aton(optarg, &cfg_bind_addr); > > + if (ret == 0) > > + error(1, errno, > > + "bind address %s invalid", optarg); > > + break; > > + case 'o': > > + cfg_outfile = strdup(optarg); > > + if (!cfg_outfile) > > + error(1, 0, "outfile invalid"); > > + break; > > + case 'm': > > + cfg_max_events = strtol(optarg, NULL, 0); > > + > > + if (cfg_max_events == LONG_MIN || > > + cfg_max_events == LONG_MAX || > > + cfg_max_events <= 0) > > + error(1, ERANGE, > > + "max events must be > 0 and < LONG_MAX"); > > + break; > > + case 'd': > > + cfg_defer_hard_irqs = strtoul(optarg, NULL, 0); > > + > > + if (cfg_defer_hard_irqs == ULONG_MAX || > > + cfg_defer_hard_irqs > INT32_MAX) > > + error(1, ERANGE, > > + "defer_hard_irqs must be <= INT32_MAX"); > > + break; > > + case 'r': > > + cfg_gro_flush_timeout = strtoull(optarg, NULL, 0); > > + > > + if (cfg_gro_flush_timeout == ULLONG_MAX) > > + error(1, ERANGE, > > + "gro_flush_timeout must be < ULLONG_MAX"); > > + break; > > + case 's': > > + cfg_irq_suspend_timeout = strtoull(optarg, NULL, 0); > > + > > + if (cfg_irq_suspend_timeout == ULLONG_MAX) > > + error(1, ERANGE, > > + "irq_suspend_timeout must be < ULLONG_MAX"); > > + break; > > + case 'i': > > + cfg_ifindex = strtoul(optarg, NULL, 0); > > + if (cfg_ifindex == ULONG_MAX) > > + error(1, ERANGE, > > + "ifindex must be < ULONG_MAX"); > > + break; > > + } > > + } > > + > > + if (!cfg_ifindex) > > + usage(argv[0]); > > + > > + if (optind != argc) > > + usage(argv[0]); > > +}
On Fri, Nov 08, 2024 at 12:47:16PM -0500, Willem de Bruijn wrote: > Joe Damato wrote: > > On Fri, Nov 08, 2024 at 09:57:48AM -0500, Willem de Bruijn wrote: > > > Joe Damato wrote: > > > > Add an epoll busy poll test using netdevsim. > > > > > > > > This test is comprised of: > > > > - busy_poller (via busy_poller.c) > > > > - busy_poll_test.sh which loads netdevsim, sets up network namespaces, > > > > and runs busy_poller to receive data and socat to send data. > > > > > > > > The selftest tests two different scenarios: > > > > - busy poll (the pre-existing version in the kernel) > > > > - busy poll with suspend enabled (what this series adds) > > > > > > > > The data transmit is a 1MiB temporary file generated from /dev/urandom > > > > and the test is considered passing if the md5sum of the input file to > > > > socat matches the md5sum of the output file from busy_poller. > > > > > > Nice test. > > > > > > Busy polling does not affect data integrity. Is the goal of this test > > > mainly to get coverage, maybe observe if the process would stall > > > indefinitely? > > > > Just to get coverage and make sure data makes it from point A to > > point B intact despite suspend being enabled. > > > > The last paragraph of the commit message highlights that netdevsim > > functionality is limited, so the test uses what is available. It can > > be extended in the future, when netdevsim supports more > > functionality. > > > > Paolo wanted a test and this is the best test we can provide given > > the limitations of the testing environment. > > > > > > netdevsim was chosen instead of veth due to netdevsim's support for > > > > netdev-genl. > > > > > > > > For now, this test uses the functionality that netdevsim provides. In the > > > > future, perhaps netdevsim can be extended to emulate device IRQs to more > > > > thoroughly test all pre-existing kernel options (like defer_hard_irqs) > > > > and suspend. > > > > [...] > > > > The rest of the feedback below seems pretty minor; I don't think > > it's worth spinning a v9 and re-sending just for this. > > > > If anything this can be handled with a clean up commit in the > > future. > > FWIW no objections from me. Thanks. > > Jakub: please let me know if you prefer to see a v9 for this?
On Fri, Nov 08, 2024 at 12:47:16PM -0500, Willem de Bruijn wrote: > Joe Damato wrote: > > On Fri, Nov 08, 2024 at 09:57:48AM -0500, Willem de Bruijn wrote: > > > Joe Damato wrote: [...] > > > > > > Nice test. > > > > > > Busy polling does not affect data integrity. Is the goal of this test > > > mainly to get coverage, maybe observe if the process would stall > > > indefinitely? > > > > Just to get coverage and make sure data makes it from point A to > > point B intact despite suspend being enabled. > > > > The last paragraph of the commit message highlights that netdevsim > > functionality is limited, so the test uses what is available. It can > > be extended in the future, when netdevsim supports more > > functionality. > > > > Paolo wanted a test and this is the best test we can provide given > > the limitations of the testing environment. > > > > > > netdevsim was chosen instead of veth due to netdevsim's support for > > > > netdev-genl. > > > > > > > > For now, this test uses the functionality that netdevsim provides. In the > > > > future, perhaps netdevsim can be extended to emulate device IRQs to more > > > > thoroughly test all pre-existing kernel options (like defer_hard_irqs) > > > > and suspend. > > > > [...] > > > > The rest of the feedback below seems pretty minor; I don't think > > it's worth spinning a v9 and re-sending just for this. > > > > If anything this can be handled with a clean up commit in the > > future. > > FWIW no objections from me. > > > Jakub: please let me know if you prefer to see a v9 for this? Since we passed the 24hr mark and the series hasn't been merged yet, I've sent a v9 just now that addresses the feedback you provided.
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 217d8b7a7365..85b0c4a2179f 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -2,6 +2,7 @@ bind_bhash bind_timewait bind_wildcard +busy_poller cmsg_sender diag_uid epoll_busy_poll diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 26a4883a65c9..3ccfe454db1a 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -96,9 +96,10 @@ TEST_PROGS += fdb_flush.sh TEST_PROGS += fq_band_pktlimit.sh TEST_PROGS += vlan_hw_filter.sh TEST_PROGS += bpf_offload.py +TEST_PROGS += busy_poll_test.sh # YNL files, must be before "include ..lib.mk" -YNL_GEN_FILES := ncdevmem +YNL_GEN_FILES := ncdevmem busy_poller TEST_GEN_FILES += $(YNL_GEN_FILES) TEST_FILES := settings diff --git a/tools/testing/selftests/net/busy_poll_test.sh b/tools/testing/selftests/net/busy_poll_test.sh new file mode 100755 index 000000000000..ffc74bc62e5a --- /dev/null +++ b/tools/testing/selftests/net/busy_poll_test.sh @@ -0,0 +1,164 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only +source net_helper.sh + +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) +NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_1_ID +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) +NSIM_DEV_2_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_2_ID + +NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device +NSIM_DEV_SYS_DEL=/sys/bus/netdevsim/del_device +NSIM_DEV_SYS_LINK=/sys/bus/netdevsim/link_device +NSIM_DEV_SYS_UNLINK=/sys/bus/netdevsim/unlink_device + +setup_ns() +{ + set -e + ip netns add nssv + ip netns add nscl + + NSIM_DEV_1_NAME=$(find $NSIM_DEV_1_SYS/net -maxdepth 1 -type d ! \ + -path $NSIM_DEV_1_SYS/net -exec basename {} \;) + NSIM_DEV_2_NAME=$(find $NSIM_DEV_2_SYS/net -maxdepth 1 -type d ! \ + -path $NSIM_DEV_2_SYS/net -exec basename {} \;) + + # ensure the server has 1 queue + ethtool -L $NSIM_DEV_1_NAME combined 1 2>/dev/null + + ip link set $NSIM_DEV_1_NAME netns nssv + ip link set $NSIM_DEV_2_NAME netns nscl + + ip netns exec nssv ip addr add '192.168.1.1/24' dev $NSIM_DEV_1_NAME + ip netns exec nscl ip addr add '192.168.1.2/24' dev $NSIM_DEV_2_NAME + + ip netns exec nssv ip link set dev $NSIM_DEV_1_NAME up + ip netns exec nscl ip link set dev $NSIM_DEV_2_NAME up + + set +e +} + +cleanup_ns() +{ + ip netns del nscl + ip netns del nssv +} + +test_busypoll() +{ + tmp_file=$(mktemp) + out_file=$(mktemp) + + # fill a test file with random data + dd if=/dev/urandom of=${tmp_file} bs=1M count=1 2> /dev/null + + timeout -k 1s 30s ip netns exec nssv ./busy_poller -p48675 -b192.168.1.1 -m8 -u0 -P1 -g16 -i${NSIM_DEV_1_IFIDX} -o${out_file}& + + wait_local_port_listen nssv 48675 tcp + + ip netns exec nscl socat -u $tmp_file TCP:192.168.1.1:48675 + + wait + + tmp_file_md5sum=$(md5sum $tmp_file | cut -f1 -d' ') + out_file_md5sum=$(md5sum $out_file | cut -f1 -d' ') + + if [ "$tmp_file_md5sum" = "$out_file_md5sum" ]; then + res=0 + else + echo "md5sum mismatch" + echo "input file md5sum: ${tmp_file_md5sum}"; + echo "output file md5sum: ${out_file_md5sum}"; + res=1 + fi + + rm $out_file $tmp_file + + return $res +} + +test_busypoll_with_suspend() +{ + tmp_file=$(mktemp) + out_file=$(mktemp) + + # fill a test file with random data + dd if=/dev/urandom of=${tmp_file} bs=1M count=1 2> /dev/null + + timeout -k 1s 30s ip netns exec nssv ./busy_poller -p48675 -b192.168.1.1 -m8 -u0 -P1 -g16 -d100 -r50000 -s20000000 -i${NSIM_DEV_1_IFIDX} -o${out_file}& + + wait_local_port_listen nssv 48675 tcp + + ip netns exec nscl socat -u $tmp_file TCP:192.168.1.1:48675 + + wait + + tmp_file_md5sum=$(md5sum $tmp_file | cut -f1 -d' ') + out_file_md5sum=$(md5sum $out_file | cut -f1 -d' ') + + if [ "$tmp_file_md5sum" = "$out_file_md5sum" ]; then + res=0 + else + echo "md5sum mismatch" + echo "input file md5sum: ${tmp_file_md5sum}"; + echo "output file md5sum: ${out_file_md5sum}"; + res=1 + fi + + rm $out_file $tmp_file + + return $res +} + +### +### Code start +### + +modprobe netdevsim + +# linking + +echo $NSIM_DEV_1_ID > $NSIM_DEV_SYS_NEW +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_NEW +udevadm settle + +setup_ns + +NSIM_DEV_1_FD=$((256 + RANDOM % 256)) +exec {NSIM_DEV_1_FD}</var/run/netns/nssv +NSIM_DEV_1_IFIDX=$(ip netns exec nssv cat /sys/class/net/$NSIM_DEV_1_NAME/ifindex) + +NSIM_DEV_2_FD=$((256 + RANDOM % 256)) +exec {NSIM_DEV_2_FD}</var/run/netns/nscl +NSIM_DEV_2_IFIDX=$(ip netns exec nscl cat /sys/class/net/$NSIM_DEV_2_NAME/ifindex) + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:$NSIM_DEV_2_IFIDX" > $NSIM_DEV_SYS_LINK +if [ $? -ne 0 ]; then + echo "linking netdevsim1 with netdevsim2 should succeed" + cleanup_ns + exit 1 +fi + +test_busypoll +if [ $? -ne 0 ]; then + echo "test_busypoll failed" + cleanup_ns + exit 1 +fi + +test_busypoll_with_suspend +if [ $? -ne 0 ]; then + echo "test_busypoll_with_suspend failed" + cleanup_ns + exit 1 +fi + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX" > $NSIM_DEV_SYS_UNLINK + +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_DEL + +cleanup_ns + +modprobe -r netdevsim + +exit 0 diff --git a/tools/testing/selftests/net/busy_poller.c b/tools/testing/selftests/net/busy_poller.c new file mode 100644 index 000000000000..8d8aa9e5939a --- /dev/null +++ b/tools/testing/selftests/net/busy_poller.c @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <assert.h> +#include <errno.h> +#include <error.h> +#include <fcntl.h> +#include <inttypes.h> +#include <limits.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> + +#include <arpa/inet.h> +#include <netinet/in.h> + +#include <sys/ioctl.h> +#include <sys/epoll.h> +#include <sys/socket.h> +#include <sys/types.h> + +#include <linux/netlink.h> +#include <linux/genetlink.h> +#include "netdev-user.h" +#include <ynl.h> + +/* if the headers haven't been updated, we need to define some things */ +#if !defined(EPOLL_IOC_TYPE) +struct epoll_params { + uint32_t busy_poll_usecs; + uint16_t busy_poll_budget; + uint8_t prefer_busy_poll; + + /* pad the struct to a multiple of 64bits */ + uint8_t __pad; +}; + +#define EPOLL_IOC_TYPE 0x8A +#define EPIOCSPARAMS _IOW(EPOLL_IOC_TYPE, 0x01, struct epoll_params) +#define EPIOCGPARAMS _IOR(EPOLL_IOC_TYPE, 0x02, struct epoll_params) +#endif + +static uint32_t cfg_port = 8000; +static struct in_addr cfg_bind_addr = { .s_addr = INADDR_ANY }; +static char *cfg_outfile; +static int cfg_max_events = 8; +static int cfg_ifindex; + +/* busy poll params */ +static uint32_t cfg_busy_poll_usecs; +static uint16_t cfg_busy_poll_budget; +static uint8_t cfg_prefer_busy_poll; + +/* IRQ params */ +static uint32_t cfg_defer_hard_irqs; +static uint64_t cfg_gro_flush_timeout; +static uint64_t cfg_irq_suspend_timeout; + +static void usage(const char *filepath) +{ + error(1, 0, + "Usage: %s -p<port> -b<addr> -m<max_events> -u<busy_poll_usecs> -P<prefer_busy_poll> -g<busy_poll_budget> -o<outfile> -d<defer_hard_irqs> -r<gro_flush_timeout> -s<irq_suspend_timeout> -i<ifindex>", + filepath); +} + +static void parse_opts(int argc, char **argv) +{ + int ret; + int c; + + if (argc <= 1) + usage(argv[0]); + + while ((c = getopt(argc, argv, "p:m:b:u:P:g:o:d:r:s:i:")) != -1) { + switch (c) { + case 'u': + cfg_busy_poll_usecs = strtoul(optarg, NULL, 0); + if (cfg_busy_poll_usecs == ULONG_MAX || + cfg_busy_poll_usecs > UINT32_MAX) + error(1, ERANGE, "busy_poll_usecs too large"); + break; + case 'P': + cfg_prefer_busy_poll = strtoul(optarg, NULL, 0); + if (cfg_prefer_busy_poll == ULONG_MAX || + cfg_prefer_busy_poll > 1) + error(1, ERANGE, + "prefer busy poll should be 0 or 1"); + break; + case 'g': + cfg_busy_poll_budget = strtoul(optarg, NULL, 0); + if (cfg_busy_poll_budget == ULONG_MAX || + cfg_busy_poll_budget > UINT16_MAX) + error(1, ERANGE, + "busy poll budget must be [0, UINT16_MAX]"); + break; + case 'p': + cfg_port = strtoul(optarg, NULL, 0); + if (cfg_port > UINT16_MAX) + error(1, ERANGE, "port must be <= 65535"); + break; + case 'b': + ret = inet_aton(optarg, &cfg_bind_addr); + if (ret == 0) + error(1, errno, + "bind address %s invalid", optarg); + break; + case 'o': + cfg_outfile = strdup(optarg); + if (!cfg_outfile) + error(1, 0, "outfile invalid"); + break; + case 'm': + cfg_max_events = strtol(optarg, NULL, 0); + + if (cfg_max_events == LONG_MIN || + cfg_max_events == LONG_MAX || + cfg_max_events <= 0) + error(1, ERANGE, + "max events must be > 0 and < LONG_MAX"); + break; + case 'd': + cfg_defer_hard_irqs = strtoul(optarg, NULL, 0); + + if (cfg_defer_hard_irqs == ULONG_MAX || + cfg_defer_hard_irqs > INT32_MAX) + error(1, ERANGE, + "defer_hard_irqs must be <= INT32_MAX"); + break; + case 'r': + cfg_gro_flush_timeout = strtoull(optarg, NULL, 0); + + if (cfg_gro_flush_timeout == ULLONG_MAX) + error(1, ERANGE, + "gro_flush_timeout must be < ULLONG_MAX"); + break; + case 's': + cfg_irq_suspend_timeout = strtoull(optarg, NULL, 0); + + if (cfg_irq_suspend_timeout == ULLONG_MAX) + error(1, ERANGE, + "irq_suspend_timeout must be < ULLONG_MAX"); + break; + case 'i': + cfg_ifindex = strtoul(optarg, NULL, 0); + if (cfg_ifindex == ULONG_MAX) + error(1, ERANGE, + "ifindex must be < ULONG_MAX"); + break; + } + } + + if (!cfg_ifindex) + usage(argv[0]); + + if (optind != argc) + usage(argv[0]); +} + +static void epoll_ctl_add(int epfd, int fd, uint32_t events) +{ + struct epoll_event ev; + + ev.events = events; + ev.data.fd = fd; + if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev) == -1) + error(1, errno, "epoll_ctl add fd: %d", fd); +} + +static void setnonblock(int sockfd) +{ + int flags; + + flags = fcntl(sockfd, F_GETFL, 0); + + if (fcntl(sockfd, F_SETFL, flags | O_NONBLOCK) == -1) + error(1, errno, "unable to set socket to nonblocking mode"); +} + +static void write_chunk(int fd, char *buf, ssize_t buflen) +{ + ssize_t remaining = buflen; + char *buf_offset = buf; + ssize_t writelen = 0; + ssize_t write_result; + + while (writelen < buflen) { + write_result = write(fd, buf_offset, remaining); + if (write_result == -1) + error(1, errno, "unable to write data to outfile"); + + writelen += write_result; + remaining -= write_result; + buf_offset += write_result; + } +} + +static void setup_queue(void) +{ + struct netdev_napi_get_list *napi_list = NULL; + struct netdev_napi_get_req_dump *req = NULL; + struct netdev_napi_set_req *set_req = NULL; + struct ynl_sock *ys; + struct ynl_error yerr; + uint32_t napi_id; + + ys = ynl_sock_create(&ynl_netdev_family, &yerr); + if (!ys) + error(1, 0, "YNL: %s", yerr.msg); + + req = netdev_napi_get_req_dump_alloc(); + netdev_napi_get_req_dump_set_ifindex(req, cfg_ifindex); + napi_list = netdev_napi_get_dump(ys, req); + + /* assume there is 1 NAPI configured and take the first */ + if (napi_list->obj._present.id) + napi_id = napi_list->obj.id; + else + error(1, 0, "napi ID not present?"); + + set_req = netdev_napi_set_req_alloc(); + netdev_napi_set_req_set_id(set_req, napi_id); + netdev_napi_set_req_set_defer_hard_irqs(set_req, cfg_defer_hard_irqs); + netdev_napi_set_req_set_gro_flush_timeout(set_req, + cfg_gro_flush_timeout); + netdev_napi_set_req_set_irq_suspend_timeout(set_req, + cfg_irq_suspend_timeout); + + if (netdev_napi_set(ys, set_req)) + error(1, 0, "can't set NAPI params: %s\n", yerr.msg); + + netdev_napi_get_list_free(napi_list); + netdev_napi_get_req_dump_free(req); + netdev_napi_set_req_free(set_req); + ynl_sock_destroy(ys); +} + +static void run_poller(void) +{ + struct epoll_event events[cfg_max_events]; + struct epoll_params epoll_params = {0}; + struct sockaddr_in server_addr; + int i, epfd, nfds; + ssize_t readlen; + int outfile_fd; + char buf[1024]; + int sockfd; + int conn; + int val; + + outfile_fd = open(cfg_outfile, O_WRONLY | O_CREAT, 0644); + if (outfile_fd == -1) + error(1, errno, "unable to open outfile: %s", cfg_outfile); + + sockfd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); + if (sockfd == -1) + error(1, errno, "unable to create listen socket"); + + server_addr.sin_family = AF_INET; + server_addr.sin_port = htons(cfg_port); + server_addr.sin_addr = cfg_bind_addr; + + epoll_params.busy_poll_usecs = cfg_busy_poll_usecs; + epoll_params.busy_poll_budget = cfg_busy_poll_budget; + epoll_params.prefer_busy_poll = cfg_prefer_busy_poll; + epoll_params.__pad = 0; + + val = 1; + if (setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, &val, sizeof(val))) + error(1, errno, "poller setsockopt reuseaddr"); + + setnonblock(sockfd); + + if (bind(sockfd, (struct sockaddr *)&server_addr, + sizeof(struct sockaddr_in))) + error(0, errno, "poller bind to port: %d\n", cfg_port); + + if (listen(sockfd, 1)) + error(1, errno, "poller listen"); + + epfd = epoll_create1(0); + if (ioctl(epfd, EPIOCSPARAMS, &epoll_params) == -1) + error(1, errno, "unable to set busy poll params"); + + epoll_ctl_add(epfd, sockfd, EPOLLIN | EPOLLOUT | EPOLLET); + + for (;;) { + nfds = epoll_wait(epfd, events, cfg_max_events, -1); + for (i = 0; i < nfds; i++) { + if (events[i].data.fd == sockfd) { + conn = accept(sockfd, NULL, NULL); + if (conn == -1) + error(1, errno, + "accepting incoming connection failed"); + + setnonblock(conn); + epoll_ctl_add(epfd, conn, + EPOLLIN | EPOLLET | EPOLLRDHUP | + EPOLLHUP); + } else if (events[i].events & EPOLLIN) { + for (;;) { + readlen = read(events[i].data.fd, buf, + sizeof(buf)); + if (readlen > 0) + write_chunk(outfile_fd, buf, + readlen); + else + break; + } + } else { + /* spurious event ? */ + } + if (events[i].events & (EPOLLRDHUP | EPOLLHUP)) { + epoll_ctl(epfd, EPOLL_CTL_DEL, + events[i].data.fd, NULL); + close(events[i].data.fd); + close(outfile_fd); + return; + } + } + } +} + +int main(int argc, char *argv[]) +{ + parse_opts(argc, argv); + setup_queue(); + run_poller(); + return 0; +}
Add an epoll busy poll test using netdevsim. This test is comprised of: - busy_poller (via busy_poller.c) - busy_poll_test.sh which loads netdevsim, sets up network namespaces, and runs busy_poller to receive data and socat to send data. The selftest tests two different scenarios: - busy poll (the pre-existing version in the kernel) - busy poll with suspend enabled (what this series adds) The data transmit is a 1MiB temporary file generated from /dev/urandom and the test is considered passing if the md5sum of the input file to socat matches the md5sum of the output file from busy_poller. netdevsim was chosen instead of veth due to netdevsim's support for netdev-genl. For now, this test uses the functionality that netdevsim provides. In the future, perhaps netdevsim can be extended to emulate device IRQs to more thoroughly test all pre-existing kernel options (like defer_hard_irqs) and suspend. Signed-off-by: Joe Damato <jdamato@fastly.com> Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca> Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Acked-by: Stanislav Fomichev <sdf@fomichev.me> --- v5: - Updated commit message to replace netcat with socat and fixed misspelling of netdevsim. No functional/code changes. v4: - Updated busy_poll_test.sh: - use socat instead of nc - drop cli.py usage from the script - removed check_ynl - Updated busy_poller.c: - use netlink to configure napi parameters v3: - New in v3 tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 3 +- tools/testing/selftests/net/busy_poll_test.sh | 164 +++++++++ tools/testing/selftests/net/busy_poller.c | 328 ++++++++++++++++++ 4 files changed, 495 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/busy_poll_test.sh create mode 100644 tools/testing/selftests/net/busy_poller.c