diff mbox series

[v7,2/7] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve pinctrl subnode and property descriptions

Message ID 20241106100741.173825-3-y.oudjana@protonmail.com
State New
Headers show
Series MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support | expand

Commit Message

Yassine Oudjana Nov. 6, 2024, 10:08 a.m. UTC 
Change "subnodes" to "subnode" in subnode description for better
grammatical accuracy, capitalize pinmux description, wrap all descriptions
at 80 characters, and remove literal style indicators from descriptions
that don't need their new lines preserved.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 352a88d7b135e..bf8dc176553c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -119,11 +119,11 @@  patternProperties:
       '^pins':
         type: object
         description:
-          A pinctrl node should contain at least one subnodes representing the
+          A pinctrl node should contain at least one subnode representing the
           pinctrl groups available on the machine. Each subnode will list the
-          pins it needs, and how they should be configured, with regard to muxer
-          configuration, pullups, drive strength, input enable/disable and input
-          schmitt.
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, pullups, drive strength, input enable/disable
+          and input schmitt.
         allOf:
           - $ref: pinmux-node.yaml
           - $ref: pincfg-node.yaml
@@ -133,7 +133,8 @@  patternProperties:
             description:
               Integer array, represents gpio pin number and mux setting.
               Supported pin number and mux varies for different SoCs, and are
-              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
 
           bias-disable: true
 
@@ -142,7 +143,7 @@  patternProperties:
               - type: boolean
               - enum: [100, 101, 102, 103]
                 description: Pull up PUPD/R0/R1 type define value.
-            description: |
+            description:
               For normal pull up type, it is not necessary to specify R1R0
               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
               will set different resistance values.
@@ -152,7 +153,7 @@  patternProperties:
               - type: boolean
               - enum: [100, 101, 102, 103]
                 description: Pull down PUPD/R0/R1 type define value.
-            description: |
+            description:
               For normal pull down type, it is not necessary to specify R1R0
               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
               will set different resistance values.