| Message ID | 20241104124413.2012794-5-quic_mmanikan@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add TSENS support for IPQ5332, IPQ5424 | expand |
On 4.11.2024 1:44 PM, Manikanta Mylavarapu wrote: > From: Praveenkumar I <quic_ipkumar@quicinc.com> > > IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsense > node with nvmem cells for calibration data. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> > --- > Changes in V6: > - No change > > arch/arm64/boot/dts/qcom/ipq5332.dtsi | 66 +++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi > index d3c3e215a15c..94dca05fdc2a 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi > @@ -177,6 +177,46 @@ cpu_speed_bin: cpu-speed-bin@1d { > reg = <0x1d 0x2>; > bits = <7 2>; > }; > + > + s11: s11@3a5 { You're adding 's11' etc. to the global label namespace. Please make the names more specific, like tsens_sens11_off [...] > + tsens: thermal-sensor@4a9000 { > + compatible = "qcom,ipq5332-tsens"; > + reg = <0x4a9000 0x1000>, > + <0x4a8000 0x1000>; Please pad the address part to 8 hex digits with leading zeroes. Konrad
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index d3c3e215a15c..94dca05fdc2a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -177,6 +177,46 @@ cpu_speed_bin: cpu-speed-bin@1d { reg = <0x1d 0x2>; bits = <7 2>; }; + + s11: s11@3a5 { + reg = <0x3a5 0x1>; + bits = <4 4>; + }; + + s12: s12@3a6 { + reg = <0x3a6 0x1>; + bits = <0 4>; + }; + + s13: s13@3a6 { + reg = <0x3a6 0x1>; + bits = <4 4>; + }; + + s14: s14@3ad { + reg = <0x3ad 0x2>; + bits = <7 4>; + }; + + s15: s15@3ae { + reg = <0x3ae 0x1>; + bits = <3 4>; + }; + + tsens_mode: mode@3e1 { + reg = <0x3e1 0x1>; + bits = <0 3>; + }; + + tsens_base0: base0@3e1 { + reg = <0x3e1 0x2>; + bits = <3 10>; + }; + + tsens_base1: base1@3e2 { + reg = <0x3e2 0x2>; + bits = <5 10>; + }; }; rng: rng@e3000 { @@ -186,6 +226,32 @@ rng: rng@e3000 { clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5332-tsens"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; + nvmem-cells = <&tsens_mode>, + <&tsens_base0>, + <&tsens_base1>, + <&s11>, + <&s12>, + <&s13>, + <&s14>, + <&s15>; + nvmem-cell-names = "mode", + "base0", + "base1", + "s11", + "s12", + "s13", + "s14", + "s15"; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5332-tlmm"; reg = <0x01000000 0x300000>;