@@ -80,23 +80,6 @@ required:
additionalProperties: false
examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
- pmic {
- #address-cells = <1>;
- #size-cells = <0>;
- adc@480 {
- compatible = "sprd,sc2731-adc";
- reg = <0x480>;
- interrupt-parent = <&sc2731_pmic>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- #io-channel-cells = <1>;
- hwlocks = <&hwlock 4>;
- nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
- nvmem-cell-names = "big_scale_calib", "small_scale_calib";
- };
- };
-
- |
#include <dt-bindings/interrupt-controller/irq.h>
pmic {
@@ -50,35 +50,4 @@ required:
- '#size-cells'
additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/leds/common.h>
-
- pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led-controller@200 {
- compatible = "sprd,sc2731-bltc";
- reg = <0x200>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0x0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <0x1>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@2 {
- reg = <0x2>;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
- };
...
new file mode 100644
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/sprd,sc2731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27xx PMIC
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+ Spreadtrum PMICs belonging to the SC27xx series integrate all mobile handset
+ power management, audio codec, battery management and user interface support
+ functions in a single chip. They have 6 major functional blocks:
+ - DCDCs to support CPU, memory
+ - LDOs to support both internal and external requirements
+ - Battery management system, such as charger, fuel gauge
+ - Audio codec
+ - User interface functions, such as indicator, flash LED and so on
+ - IC level interface, such as power on/off control, RTC, typec and so on
+
+properties:
+ $nodename:
+ pattern: '^pmic@[0-9a-f]+$'
+
+ compatible:
+ enum:
+ - sprd,sc2720
+ - sprd,sc2721
+ - sprd,sc2723
+ - sprd,sc2730
+ - sprd,sc2731
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ spi-max-frequency: true
+
+ '#address-cells':
+ const: 1
+
+ '#interrupt-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ regulators:
+ type: object
+ $ref: /schemas/regulator/sprd,sc2731-regulator.yaml#
+
+patternProperties:
+ "^adc@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/iio/adc/sprd,sc2720-adc.yaml#
+
+ "^charger@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/power/supply/sc2731-charger.yaml#
+
+ "^efuse@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/nvmem/sprd,sc2731-efuse.yaml#
+
+ "^fuel-gauge@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/power/supply/sc27xx-fg.yaml#
+
+ "^gpio@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/gpio/sprd,gpio-eic.yaml#
+
+ "^led-controller@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/leds/sprd,sc2731-bltc.yaml#
+
+ "^rtc@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/rtc/sprd,sc2731-rtc.yaml#
+
+ "^vibrator@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/input/sprd,sc27xx-vibrator.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - spi-max-frequency
+ - '#address-cells'
+ - '#interrupt-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ spi-max-frequency = <26000000>;
+ #address-cells = <1>;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ charger@0 {
+ compatible = "sprd,sc2731-charger";
+ reg = <0x0>;
+ phys = <&ssphy>;
+ monitored-battery = <&bat>;
+ };
+
+ led-controller@200 {
+ compatible = "sprd,sc2731-bltc";
+ reg = <0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <0x1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ rtc@280 {
+ compatible = "sprd,sc2731-rtc";
+ reg = <0x280>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <2>;
+ };
+
+ pmic_eic: gpio@300 {
+ compatible = "sprd,sc2731-eic";
+ reg = <0x300>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <5>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ efuse@380 {
+ compatible = "sprd,sc2731-efuse";
+ reg = <0x380>;
+ hwlocks = <&hwlock 12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ fgu_calib: calib@6 {
+ reg = <0x6 0x2>;
+ bits = <0 9>;
+ };
+
+ adc_big_scale: calib@24 {
+ reg = <0x24 0x2>;
+ };
+
+ adc_small_scale: calib@26 {
+ reg = <0x26 0x2>;
+ };
+ };
+
+ adc@480 {
+ compatible = "sprd,sc2731-adc";
+ reg = <0x480>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <0>;
+ #io-channel-cells = <1>;
+ hwlocks = <&hwlock 4>;
+ nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+ nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+ };
+
+ fuel-gauge@a00 {
+ compatible = "sprd,sc2731-fgu";
+ reg = <0xa00>;
+ battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <4>;
+ io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+ io-channel-names = "bat-temp", "charge-vol";
+ nvmem-cells = <&fgu_calib>;
+ nvmem-cell-names = "fgu_calib";
+ monitored-battery = <&bat>;
+ sprd,calib-resistance-micro-ohms = <21500>;
+ };
+
+ vibrator@ec8 {
+ compatible = "sprd,sc2731-vibrator";
+ reg = <0xec8>;
+ };
+
+ regulators {
+ compatible = "sprd,sc2731-regulator";
+
+ BUCK_CPU0 {
+ regulator-name = "vddarm0";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1996875>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+
+ LDO_CAMA0 {
+ regulator-name = "vddcama0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,40 +0,0 @@
-Spreadtrum SC27xx Power Management Integrated Circuit (PMIC)
-
-The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730
-and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all
-mobile handset power management, audio codec, battery management and user
-interface support function in a single chip. It has 6 major functional
-blocks:
-- DCDCs to support CPU, memory.
-- LDOs to support both internal and external requirement.
-- Battery management system, such as charger, fuel gauge.
-- Audio codec.
-- User interface function, such as indicator, flash LED and so on.
-- IC level interface, such as power on/off control, RTC and typec and so on.
-
-Required properties:
-- compatible: Should be one of the following:
- "sprd,sc2720"
- "sprd,sc2721"
- "sprd,sc2723"
- "sprd,sc2730"
- "sprd,sc2731"
-- reg: The address of the device chip select, should be 0.
-- spi-max-frequency: Typically set to 26000000.
-- interrupts: The interrupt line the device is connected to.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2.
-- #address-cells: Child device offset number of cells, must be 1.
-- #size-cells: Child device size number of cells, must be 0.
-
-Example:
-pmic@0 {
- compatible = "sprd,sc2731";
- reg = <0>;
- spi-max-frequency = <26000000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
@@ -36,33 +36,4 @@ allOf:
- $ref: nvmem-deprecated-cells.yaml#
unevaluatedProperties: false
-
-examples:
- - |
- pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- efuse@380 {
- compatible = "sprd,sc2731-efuse";
- reg = <0x380>;
- hwlocks = <&hwlock 12>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* Data cells */
- fgu_calib: calib@6 {
- reg = <0x6 0x2>;
- bits = <0 9>;
- };
-
- adc_big_scale: calib@24 {
- reg = <0x24 0x2>;
- };
-
- adc_small_scale: calib@26 {
- reg = <0x26 0x2>;
- };
- };
- };
...
@@ -30,23 +30,4 @@ properties:
- constant-charge-voltage-max-microvolt: maximum constant input voltage.
additionalProperties: false
-
-examples:
- - |
- bat: battery {
- compatible = "simple-battery";
- charge-term-current-microamp = <120000>;
- constant-charge-voltage-max-microvolt = <4350000>;
- };
-
- pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery@a00 {
- compatible = "sprd,sc2731-charger";
- reg = <0x0>;
- phys = <&ssphy>;
- monitored-battery = <&bat>;
- };
- };
+...
@@ -65,40 +65,4 @@ required:
- monitored-battery
additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/gpio/gpio.h>
- bat: battery {
- compatible = "simple-battery";
- charge-full-design-microamp-hours = <1900000>;
- constant-charge-voltage-max-microvolt = <4350000>;
- ocv-capacity-celsius = <20>;
- ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
- <4022000 85>, <3983000 80>, <3949000 75>,
- <3917000 70>, <3889000 65>, <3864000 60>,
- <3835000 55>, <3805000 50>, <3787000 45>,
- <3777000 40>, <3773000 35>, <3770000 30>,
- <3765000 25>, <3752000 20>, <3724000 15>,
- <3680000 10>, <3605000 5>, <3400000 0>;
- // ...
- };
-
- pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery@a00 {
- compatible = "sprd,sc2731-fgu";
- reg = <0xa00>;
- battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&sc2731_pmic>;
- interrupts = <4>;
- io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
- io-channel-names = "bat-temp", "charge-vol";
- nvmem-cells = <&fgu_calib>;
- nvmem-cell-names = "fgu_calib";
- monitored-battery = <&bat>;
- sprd,calib-resistance-micro-ohms = <21500>;
- };
- };
+...
@@ -43,25 +43,4 @@ required:
- compatible
additionalProperties: false
-
-examples:
- - |
- regulators {
- compatible = "sprd,sc2731-regulator";
-
- BUCK_CPU0 {
- regulator-name = "vddarm0";
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1996875>;
- regulator-ramp-delay = <25000>;
- regulator-always-on;
- };
-
- LDO_CAMA0 {
- regulator-name = "vddcama0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3750000>;
- regulator-enable-ramp-delay = <100>;
- };
- };
...
@@ -30,20 +30,4 @@ allOf:
- $ref: rtc.yaml#
unevaluatedProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
-
- pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtc@280 {
- compatible = "sprd,sc2731-rtc";
- reg = <0x280>;
- interrupt-parent = <&sc2731_pmic>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
...
Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the filename to match the compatible of the only in-tree user, SC2731. Change #interrupt-cells value to 1, as according to [1] that is the correct value. Move partial examples of child nodes in the child node schemas to this new MFD schema to have one complete example. [1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/ Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- Changes in V2: - rebase on next-20241029 - drop partial examples in child node schemas, move them here (Rob) Link to V1: https://lore.kernel.org/lkml/Zr3X1RoQs7ElTnlJ@standask-GA-A55M-S2HP/ .../bindings/iio/adc/sprd,sc2720-adc.yaml | 17 -- .../bindings/leds/sprd,sc2731-bltc.yaml | 31 --- .../devicetree/bindings/mfd/sprd,sc2731.yaml | 244 ++++++++++++++++++ .../bindings/mfd/sprd,sc27xx-pmic.txt | 40 --- .../bindings/nvmem/sprd,sc2731-efuse.yaml | 29 --- .../bindings/power/supply/sc2731-charger.yaml | 21 +- .../bindings/power/supply/sc27xx-fg.yaml | 38 +-- .../regulator/sprd,sc2731-regulator.yaml | 21 -- .../bindings/rtc/sprd,sc2731-rtc.yaml | 16 -- 9 files changed, 246 insertions(+), 211 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/sprd,sc2731.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt