@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos7885-jackpotlte.dtb \
exynos850-e850-96.dtb \
exynos8895-dreamlte.dtb \
+ exynos9810-starlte.dtb \
exynos990-c1s.dtb \
exynosautov9-sadk.dtb \
exynosautov920-sadk.dtb
new file mode 100644
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S9 (starlte/SM-G960F) device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+/dts-v1/;
+#include "exynos9810.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung Galaxy S9 (SM-G960F)";
+ compatible = "samsung,starlte", "samsung,exynos9810";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@cc000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+ width = <1440>;
+ height = <2960>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x3c800000>,
+ <0x8 0x80000000 0x80000000>,
+ <0x0 0xc0000000 0x20000000>,
+ <0x0 0xe1900000 0x1e700000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@cc000000 {
+ reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_voldown &key_volup &key_bixby &key_power>;
+ pinctrl-names = "default";
+
+ /* In stock firmware used for assistant. Map it as a camera button for now */
+ bixby-key {
+ label = "Bixby";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ power-key {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ volup-key {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ voldown-key {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&oscclk {
+ clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+ key_bixby: key-bixby-pins {
+ samsung,pins = "gpa0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_volup: key-volup-pins {
+ samsung,pins = "gpa0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_voldown: key-voldown-pins {
+ samsung,pins = "gpa0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_power: key-power-pins {
+ samsung,pins = "gpa2-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
Samsung Galaxy S9 (SM-G960F), codenamed starlte, is a mobile phone released in 2017. It has 4GB of RAM, 64GB of UFS storage, Exynos9810 SoC and 1440x2960 Super AMOLED display. This initial device tree enables the framebuffer pre-initialised by bootloader and physical buttons of the device, with more support to come in the future. Co-authored-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Markuss Broks <markuss.broks@gmail.com> --- arch/arm64/boot/dts/exynos/Makefile | 1 + arch/arm64/boot/dts/exynos/exynos9810-starlte.dts | 119 ++++++++++++++++++++++ 2 files changed, 120 insertions(+)