@@ -120,6 +120,13 @@ config NAND_BRCMNAND
Enable the driver for NAND flash on platforms using a Broadcom NAND
controller.
+config NAND_BRCMNAND_BCMBCA
+ bool "Support Broadcom NAND controller on BCMBCA platforms"
+ depends on NAND_BRCMNAND && ARCH_BCMBCA
+ help
+ Enable support for broadcom nand driver on BCA (broadband
+ access) platforms such as BCM6846.
+
config NAND_BRCMNAND_6368
bool "Support Broadcom NAND controller on bcm6368"
depends on NAND_BRCMNAND && ARCH_BMIPS
@@ -6,6 +6,7 @@ obj-$(CONFIG_NAND_BRCMNAND_6753) += bcm6753_nand.o
obj-$(CONFIG_NAND_BRCMNAND_68360) += bcm68360_nand.o
obj-$(CONFIG_NAND_BRCMNAND_6838) += bcm6838_nand.o
obj-$(CONFIG_NAND_BRCMNAND_6858) += bcm6858_nand.o
+obj-$(CONFIG_NAND_BRCMNAND_BCMBCA) += bcmbca_nand.o
obj-$(CONFIG_NAND_BRCMNAND_IPROC) += iproc_nand.o
obj-$(CONFIG_NAND_BRCMNAND) += brcmnand.o
obj-$(CONFIG_NAND_BRCMNAND) += brcmnand_compat.o
new file mode 100644
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <asm/io.h>
+#include <memalign.h>
+#include <nand.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <dm.h>
+#include <linux/printk.h>
+
+#include "brcmnand.h"
+
+struct bcmbca_nand_soc {
+ struct brcmnand_soc soc;
+ void __iomem *base;
+};
+
+#define BCMBCA_NAND_INT 0x00
+#define BCMBCA_NAND_STATUS_SHIFT 0
+#define BCMBCA_NAND_STATUS_MASK (0xfff << BCMBCA_NAND_STATUS_SHIFT)
+
+#define BCMBCA_NAND_INT_EN 0x04
+#define BCMBCA_NAND_ENABLE_SHIFT 0
+#define BCMBCA_NAND_ENABLE_MASK (0xffff << BCMBCA_NAND_ENABLE_SHIFT)
+
+enum {
+ BCMBCA_NP_READ = BIT(0),
+ BCMBCA_BLOCK_ERASE = BIT(1),
+ BCMBCA_COPY_BACK = BIT(2),
+ BCMBCA_PAGE_PGM = BIT(3),
+ BCMBCA_CTRL_READY = BIT(4),
+ BCMBCA_DEV_RBPIN = BIT(5),
+ BCMBCA_ECC_ERR_UNC = BIT(6),
+ BCMBCA_ECC_ERR_CORR = BIT(7),
+};
+
+#if defined(CONFIG_ARM64)
+#define ALIGN_REQ 8
+#else
+#define ALIGN_REQ 4
+#endif
+
+static inline bool bcmbca_nand_is_buf_aligned(void *flash_cache, void *buffer)
+{
+ return IS_ALIGNED((uintptr_t)buffer, ALIGN_REQ) &&
+ IS_ALIGNED((uintptr_t)flash_cache, ALIGN_REQ);
+}
+
+static bool bcmbca_nand_intc_ack(struct brcmnand_soc *soc)
+{
+ struct bcmbca_nand_soc *priv =
+ container_of(soc, struct bcmbca_nand_soc, soc);
+ void __iomem *mmio = priv->base + BCMBCA_NAND_INT;
+ u32 val = brcmnand_readl(mmio);
+
+ if (val & (BCMBCA_CTRL_READY << BCMBCA_NAND_STATUS_SHIFT)) {
+ /* Ack interrupt */
+ val &= ~BCMBCA_NAND_STATUS_MASK;
+ val |= BCMBCA_CTRL_READY << BCMBCA_NAND_STATUS_SHIFT;
+ brcmnand_writel(val, mmio);
+ return true;
+ }
+
+ return false;
+}
+
+static void bcmbca_nand_intc_set(struct brcmnand_soc *soc, bool en)
+{
+ struct bcmbca_nand_soc *priv =
+ container_of(soc, struct bcmbca_nand_soc, soc);
+ void __iomem *mmio = priv->base + BCMBCA_NAND_INT_EN;
+ u32 val = brcmnand_readl(mmio);
+
+ /* Don't ack any interrupts */
+ val &= ~BCMBCA_NAND_STATUS_MASK;
+
+ if (en)
+ val |= BCMBCA_CTRL_READY << BCMBCA_NAND_ENABLE_SHIFT;
+ else
+ val &= ~(BCMBCA_CTRL_READY << BCMBCA_NAND_ENABLE_SHIFT);
+
+ brcmnand_writel(val, mmio);
+}
+
+static void bcmbca_read_data_bus(struct brcmnand_soc *soc,
+ void __iomem *flash_cache, u32 *buffer, int fc_words)
+{
+ /*
+ * memcpy can do unaligned aligned access depending on source
+ * and dest address, which is incompatible with nand cache. Fallback
+ * to the memcpy_fromio in such case
+ */
+ if (bcmbca_nand_is_buf_aligned((void __force *)flash_cache, buffer))
+ memcpy((void *)buffer, (void __force *)flash_cache, fc_words * 4);
+ else
+ memcpy_fromio((void *)buffer, flash_cache, fc_words * 4);
+}
+
+static int bcmbca_nand_probe(struct udevice *dev)
+{
+ struct udevice *pdev = dev;
+ struct bcmbca_nand_soc *priv = dev_get_priv(dev);
+ struct brcmnand_soc *soc;
+ struct resource res;
+
+ soc = &priv->soc;
+
+ dev_read_resource_byname(pdev, "nand-int-base", &res);
+ priv->base = devm_ioremap(dev, res.start, resource_size(&res));
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ soc->ctlrdy_ack = bcmbca_nand_intc_ack;
+ soc->ctlrdy_set_enabled = bcmbca_nand_intc_set;
+ soc->read_data_bus = bcmbca_read_data_bus;
+
+ /* Disable and ack all interrupts */
+ brcmnand_writel(0, priv->base + BCMBCA_NAND_INT_EN);
+ brcmnand_writel(0, priv->base + BCMBCA_NAND_INT);
+
+ return brcmnand_probe(pdev, soc);
+}
+
+static const struct udevice_id bcmbca_nand_dt_ids[] = {
+ {
+ .compatible = "brcm,nand-bcm63138",
+ },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(bcmbca_nand) = {
+ .name = "bcmbca-nand",
+ .id = UCLASS_MTD,
+ .of_match = bcmbca_nand_dt_ids,
+ .probe = bcmbca_nand_probe,
+ .priv_auto = sizeof(struct bcmbca_nand_soc),
+};
+
+void board_nand_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_DRIVER_GET(bcmbca_nand), &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize %s. (error %d)\n", dev->name,
+ ret);
+}