diff mbox series

[3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support

Message ID 20241007-pocof1-touchscreen-support-v1-3-db31b21818c5@joelselvaraj.com
State New
Headers show
Series Add Xiaomi Poco F1 touchscreen support | expand

Commit Message

Joel Selvaraj via B4 Relay Oct. 8, 2024, 2:59 a.m. UTC 
From: Joel Selvaraj <joelselvaraj.oss@gmail.com>

Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
(EBBG) panel variant.

Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
---
 .../boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
index 76931ebad065e..2d6f0e382a6cb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -13,3 +13,26 @@  &display_panel {
 	compatible = "ebbg,ft8719";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,ft8719";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};