| Message ID | 20241008-starqltechn_integration_upstream-v6-3-5445365d3052@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | This is continued work on Samsung S9(SM-9600) starqltechn | expand |
сб, 26 окт. 2024 г. в 13:41, Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>: > > On 8.10.2024 6:51 PM, Dzmitry Sankouski wrote: > > Usb regulator was wrongly pointed to vreg_l1a_0p875. > > However, on starqltechn it's powered from vreg_l5a_0p8. > > > > Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn") > > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > > > > --- > > I really really doubt that the supplies for on-SoC PHYs were altered, > given these regulators are assigned based on their specific characteristics >
On 2.12.2024 2:41 PM, Dzmitry Sankouski wrote: > сб, 26 окт. 2024 г. в 13:41, Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>: >> >> On 8.10.2024 6:51 PM, Dzmitry Sankouski wrote: >>> Usb regulator was wrongly pointed to vreg_l1a_0p875. >>> However, on starqltechn it's powered from vreg_l5a_0p8. >>> >>> Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn") >>> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> >>> >>> --- >> >> I really really doubt that the supplies for on-SoC PHYs were altered, >> given these regulators are assigned based on their specific characteristics >> > > From rooted android system from klabit87 on starqltechn: > > ``` > starqltechn:/ # cat /proc/cpuinfo | grep Hardware > Hardware : Qualcomm Technologies, Inc SDM845 > starqltechn:/ # uname -a > Linux localhost 4.9.186-klabitV6.5 #1 SMP PREEMPT Thu Dec 10 19:42:53 > CST 2020 aarch64 > starqltechn:/ # cat > /sys/kernel/debug/regulator/soc:rpmh-regulator-ldoa1-pm8998_l1/consumers > Device-Supply EN Min_uV Max_uV load_uA > ae90000.qcom,dp_display-vdda-0p9 N 880000 880000 0 > 1d87000.ufsphy_mem-vdda-phy Y 880000 880000 62900 > ae96400.qcom,mdss_dsi_phy0-vdda-0p9 N 0 0 0 > ae94400.qcom,mdss_dsi_phy0-vdda-0p9 Y 880000 880000 36000 > 1c00000.qcom,pcie-vreg-0.9 Y 880000 880000 24000 > pm8998_l1 N 0 0 0 > starqltechn:/ # cat > /sys/kernel/debug/regulator/soc:rpmh-regulator-ldoa5-pm8998_l5/consumers > Device-Supply EN Min_uV Max_uV load_uA > ae90000.qcom,dp_display-vdda-usb1-ss-core N 0 0 0 > 88e2000.qusb-vdd Y 800000 800000 0 > 88e8000.ssphy-vdd Y 800000 800000 0 > pm8998_l5 N 0 0 0 > ``` > > I also downloaded kernel source from Samsung, to check its dts, > and it also powers qusb@88e2000 and ssphy@88e8000 from 'pm8998_l5' regulator. Interesting.. could you try to forcefully shut down L5A (I doubt you'll be able to do so with L1A given it powers so much digital logic), or set its regulator-min&max-microvolt to a way-too-low voltage (vmin seems to be 312000)? You should then be able to tell fairly easily, depending on whether usb2 still works after a replug Konrad
пн, 2 дек. 2024 г. в 18:09, Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>: > > On 2.12.2024 2:41 PM, Dzmitry Sankouski wrote: > > сб, 26 окт. 2024 г. в 13:41, Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>: > >> > >> On 8.10.2024 6:51 PM, Dzmitry Sankouski wrote: > >>> Usb regulator was wrongly pointed to vreg_l1a_0p875. > >>> However, on starqltechn it's powered from vreg_l5a_0p8. > >>> > >>> Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn") > >>> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > >>> > >>> --- > >> > >> I really really doubt that the supplies for on-SoC PHYs were altered, > >> given these regulators are assigned based on their specific characteristics > >> > > > > From rooted android system from klabit87 on starqltechn: > > > > ``` > > starqltechn:/ # cat /proc/cpuinfo | grep Hardware > > Hardware : Qualcomm Technologies, Inc SDM845 > > starqltechn:/ # uname -a > > Linux localhost 4.9.186-klabitV6.5 #1 SMP PREEMPT Thu Dec 10 19:42:53 > > CST 2020 aarch64 > > starqltechn:/ # cat > > /sys/kernel/debug/regulator/soc:rpmh-regulator-ldoa1-pm8998_l1/consumers > > Device-Supply EN Min_uV Max_uV load_uA > > ae90000.qcom,dp_display-vdda-0p9 N 880000 880000 0 > > 1d87000.ufsphy_mem-vdda-phy Y 880000 880000 62900 > > ae96400.qcom,mdss_dsi_phy0-vdda-0p9 N 0 0 0 > > ae94400.qcom,mdss_dsi_phy0-vdda-0p9 Y 880000 880000 36000 > > 1c00000.qcom,pcie-vreg-0.9 Y 880000 880000 24000 > > pm8998_l1 N 0 0 0 > > starqltechn:/ # cat > > /sys/kernel/debug/regulator/soc:rpmh-regulator-ldoa5-pm8998_l5/consumers > > Device-Supply EN Min_uV Max_uV load_uA > > ae90000.qcom,dp_display-vdda-usb1-ss-core N 0 0 0 > > 88e2000.qusb-vdd Y 800000 800000 0 > > 88e8000.ssphy-vdd Y 800000 800000 0 > > pm8998_l5 N 0 0 0 > > ``` > > > > I also downloaded kernel source from Samsung, to check its dts, > > and it also powers qusb@88e2000 and ssphy@88e8000 from 'pm8998_l5' regulator. > > Interesting.. could you try to forcefully shut down L5A (I doubt you'll > be able to do so with L1A given it powers so much digital logic), or > set its regulator-min&max-microvolt to a way-too-low voltage (vmin > seems to be 312000)? > > You should then be able to tell fairly easily, depending on whether usb2 > still works after a replug > Usb doesn't worked in such experiment: Here's the log: ``` [ 3.541733] ldo5: Setting 312000-312000uV ...... [ 3.808224] dwc3 a600000.usb: Adding to iommu group 5 [ 3.823116] qcom-qmp-combo-phy 88e8000.phy: phy initialization timed-out [ 3.824323] phy phy-88e8000.phy.0: phy init failed --> -110 [ 3.825916] dwc3 a600000.usb: error -ETIMEDOUT: failed to initialize core [ 3.827208] dwc3 a600000.usb: probe with driver dwc3 failed with error -110 [ 3.828548] probe of a600000.usb returned 110 after 20399 usecs ```
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index 6fc30fd1262b..f3f2b25883d8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -135,8 +135,6 @@ vdda_pll_cc_ebi23: vdda_sp_sensor: vdda_ufs1_core: vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: vreg_l1a_0p875: ldo1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; @@ -157,6 +155,7 @@ vreg_l3a_1p0: ldo3 { regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vdda_usb1_ss_core: vdd_wcss_cx: vdd_wcss_mx: vdda_wcss_pll:
Usb regulator was wrongly pointed to vreg_l1a_0p875. However, on starqltechn it's powered from vreg_l5a_0p8. Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn") Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> --- Changes in v6: - refactor: no space between tag in commit message. - refactor: s/starqltechn/sdm845-starqltechn in subject. --- arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)