| Message ID | 20241007051255.4378-1-manivannan.sadhasivam@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported | expand |
Hello, > Currently, if 'Global IRQ' is supported by the platform, only the Link up > interrupt is enabled in the PARF_INT_ALL_MASK register. This masks MSIs > on some platforms. The MSI bits in PARF_INT_ALL_MASK register are enabled > by default in the hardware, but commit 4581403f6792 ("PCI: qcom: Enumerate > endpoints based on Link up event in 'global_irq' interrupt") disabled them > and enabled only the Link up interrupt. While MSI continued to work on the > SM8450 platform that was used to test the offending commit, on other > platforms like SM8250, X1E80100, MSIs are getting masked. And they require > enabling the MSI interrupt bits in the register to unmask (enable) the > MSIs. > > Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are > described as 'diagnostic' interrupts in the internal documentation, > disabling them masks MSI on these platforms. Due to this, MSIs were not > reported to be received these platforms while supporting 'Global IRQ'. > > So enable the MSI interrupts along with the Link up interrupt in the > PARF_INT_ALL_MASK register if 'Global IRQ' is supported. This ensures that > the MSIs continue to work and also the driver is able to catch the Link > up interrupt for enumerating endpoint devices. Applied to controller/qcom, thank you! [01/01] PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported https://git.kernel.org/pci/pci/c/ba4a2e2317b9 Krzysztof
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index ef44a82be058..2b33d03ed054 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -133,6 +133,7 @@ /* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */ #define PARF_INT_ALL_LINK_UP BIT(13) +#define PARF_INT_MSI_DEV_0_7 GENMASK(30, 23) /* PARF_NO_SNOOP_OVERIDE register fields */ #define WR_NO_SNOOP_OVERIDE_EN BIT(1) @@ -1716,7 +1717,8 @@ static int qcom_pcie_probe(struct platform_device *pdev) goto err_host_deinit; } - writel_relaxed(PARF_INT_ALL_LINK_UP, pcie->parf + PARF_INT_ALL_MASK); + writel_relaxed(PARF_INT_ALL_LINK_UP | PARF_INT_MSI_DEV_0_7, + pcie->parf + PARF_INT_ALL_MASK); } qcom_pcie_icc_opp_update(pcie);
Currently, if 'Global IRQ' is supported by the platform, only the Link up interrupt is enabled in the PARF_INT_ALL_MASK register. This masks MSIs on some platforms. The MSI bits in PARF_INT_ALL_MASK register are enabled by default in the hardware, but commit 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt") disabled them and enabled only the Link up interrupt. While MSI continued to work on the SM8450 platform that was used to test the offending commit, on other platforms like SM8250, X1E80100, MSIs are getting masked. And they require enabling the MSI interrupt bits in the register to unmask (enable) the MSIs. Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are described as 'diagnostic' interrupts in the internal documentation, disabling them masks MSI on these platforms. Due to this, MSIs were not reported to be received these platforms while supporting 'Global IRQ'. So enable the MSI interrupts along with the Link up interrupt in the PARF_INT_ALL_MASK register if 'Global IRQ' is supported. This ensures that the MSIs continue to work and also the driver is able to catch the Link up interrupt for enumerating endpoint devices. Fixes: 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt") Reported-by: Konrad Dybcio <konradybcio@kernel.org> Closes: https://lore.kernel.org/linux-pci/9a692c98-eb0a-4d86-b642-ea655981ff53@kernel.org/ Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SL7 Reviewed-by: Qiang Yu <quic_qianyu@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Changes in v2: * Reworded the commit message * Collected tags drivers/pci/controller/dwc/pcie-qcom.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)