diff mbox series

[v12] thermal/drivers/mediatek: add another get_temp ops for thermal sensors

Message ID 20241001-auxadc_thermal-v12-1-2b86c094ff46@chromium.org
State New
Headers show
Series [v12] thermal/drivers/mediatek: add another get_temp ops for thermal sensors | expand

Commit Message

Hsin-Te Yuan Oct. 1, 2024, 11:16 a.m. UTC 
From: James Lo <james.lo@mediatek.com>

Previously, the driver only supported reading the temperature from all
sensors and returning the maximum value. This updatea adds another
get_temp ops to support reading the temperature from each sensor
separately.

This feature provides the ability to read all thermal sensor values in
the SoC through the node /sys/class/thermal.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: James Lo <james.lo@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
---
Changes in v12:
- Remove unnecessary check and unused variable assignment in mtk_read_sensor_temp.
- Add more about what this patch achieves in the commit message.
- Link to v11: https://lore.kernel.org/r/20240809-auxadc_thermal-v11-1-af36cc74f3a3@chromium.org

Changes in V11:
    - Rebase on kernel v6.11-rc2
    - Use mtk_thermal_temp_is_valid in mtk_read_sensor_temp just like
      mtk_thermal_bank_temperature
    - Change the error handling of devm_thermal_of_zone_register return
      value
    - link to V10: https://lore.kernel.org/lkml/20220519101044.16765-1-james.lo@mediatek.com/

Changes in V10:
    - Rebase to kernel-v5.18-rc7
    - Resend

Changes in V9:
    - Rebase to kernel-v5.14-rc1
    - Bind raw_to_mcelsius_v1 or raw_to_mcelsius_v2 to compatible
      data of struct mtk_thermal_data
    - Remove duplicate struct 'mtk_thermal_bank'
    - Remove unnecessary if condition check
    - Return error if any thermal zone fail to register

Changes in V8:
    - Rebase to kernel-v5.13-rc1
    - Resend

Changes in v7:
    - Fix build error in v6.

Changes in v6:
    - Rebase to kernel-5.11-rc1.
    - [1/3]
        - add interrupts property.
    - [2/3]
        - add the Tested-by in the commit message.
    - [3/3]
        - use the mt->conf->msr[id] instead of conf->msr[id] in the
          _get_sensor_temp and mtk_thermal_bank_temperature.
        - remove the redundant space in _get_sensor_temp and
          mtk_read_sensor_temp.
        - change kmalloc to dev_kmalloc in mtk_thermal_probe.

Changes in v5:
    - Rebase to kernel-5.9-rc1.
    - Revise the title of cover letter.
    - Drop "[v4,7/7] thermal: mediatek: use spinlock to protect PTPCORESEL"
    - [2/2]
        -  Add the judgement to the version of raw_to_mcelsius.

Changes in v4:
    - Rebase to kernel-5.6-rc1.
    - [1/7]
        - Squash thermal zone settings in the dtsi from [v3,5/8]
          arm64: dts: mt8183: Increase polling frequency for CPU thermal zone.
        - Remove the property of interrupts and mediatek,hw-reset-temp.
    - [2/7]
        - Correct commit message.
    - [4/7]
        - Change the target temperature to the 80C and change the commit message.
    - [6/7]
        - Adjust newline alignment.
        - Fix the judgement on the return value of registering thermal zone.

Changes in v3:
    - Rebase to kernel-5.5-rc1.
    - [1/8]
        - Update sustainable power of cpu, tzts1~5 and tztsABB.
    - [7/8]
        - Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
          in dts, which is normal for mt8173, so prompt a warning here instead of
          failing.

    Return -EAGAIN instead of -EACCESS on the first read of sensor that
        often are bogus values. This can avoid following warning on boot:

          thermal thermal_zone6: failed to read out thermal zone (-13)

Changes in v2:
    - [1/8]
        - Add the sustainable-power,trips,cooling-maps to the tzts1~tztsABB.
    - [4/8]
        - Add the min opp of cpu throttle.
---

---
 drivers/thermal/mediatek/auxadc_thermal.c | 70 +++++++++++++++++++++++++++----
 1 file changed, 62 insertions(+), 8 deletions(-)


---
base-commit: b589839414be04b2b37e4bf6f84af576c99faf64
change-id: 20240809-auxadc_thermal-9be338ec8b1c

Best regards,
diff mbox series

Patch

diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
index 9ee2e7283435acfcbb1a956303b6122a08affecc..10938be2e5545fba2fff7d5cc5a0269d42e5d44d 100644
--- a/drivers/thermal/mediatek/auxadc_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -847,7 +847,8 @@  static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 
 static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
 {
-	struct mtk_thermal *mt = thermal_zone_device_priv(tz);
+	struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
+	struct mtk_thermal *mt = bank->mt;
 	int i;
 	int tempmax = INT_MIN;
 
@@ -866,10 +867,41 @@  static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
 	return 0;
 }
 
+static int mtk_read_sensor_temp(struct thermal_zone_device *tz, int *temperature)
+{
+	struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
+	struct mtk_thermal *mt = bank->mt;
+	const struct mtk_thermal_data *conf = mt->conf;
+	int id = bank->id - 1;
+	int temp = INT_MIN;
+	u32 raw;
+
+	raw = readl(mt->thermal_base + conf->msr[id]);
+
+	temp = mt->raw_to_mcelsius(mt, id, raw);
+
+	/*
+	 * The first read of a sensor often contains very high bogus
+	 * temperature value. Filter these out so that the system does
+	 * not immediately shut down.
+	 */
+
+	if (unlikely(!mtk_thermal_temp_is_valid(temp)))
+		return -EAGAIN;
+
+	*temperature = temp;
+
+	return 0;
+}
+
 static const struct thermal_zone_device_ops mtk_thermal_ops = {
 	.get_temp = mtk_read_temp,
 };
 
+static const struct thermal_zone_device_ops mtk_thermal_sensor_ops = {
+	.get_temp = mtk_read_sensor_temp,
+};
+
 static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 				  u32 apmixed_phys_base, u32 auxadc_phys_base,
 				  int ctrl_id)
@@ -1199,6 +1231,7 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 	u64 auxadc_phys_base, apmixed_phys_base;
 	struct thermal_zone_device *tzdev;
 	void __iomem *apmixed_base, *auxadc_base;
+	struct mtk_thermal_bank *tz;
 
 	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
 	if (!mt)
@@ -1285,14 +1318,35 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 			mtk_thermal_init_bank(mt, i, apmixed_phys_base,
 					      auxadc_phys_base, ctrl_id);
 
-	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-					      &mtk_thermal_ops);
-	if (IS_ERR(tzdev))
-		return PTR_ERR(tzdev);
+	for (i = 0; i <= mt->conf->num_sensors; i++) {
+		tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
+		if (!tz)
+			return -ENOMEM;
+
+		tz->mt = mt;
+		tz->id = i;
+
+		tzdev = devm_thermal_of_zone_register(&pdev->dev, i,
+						      tz, (i == 0) ?
+						      &mtk_thermal_ops
+						      : &mtk_thermal_sensor_ops);
+
+		if (IS_ERR(tzdev)) {
+			ret = PTR_ERR(tzdev);
+			if (ret == -ENODEV) {
+				dev_warn(&pdev->dev, "can't find thermal sensor %d\n", i);
+				continue;
+			}
+			dev_err(&pdev->dev,
+				"Error: Failed to register thermal zone %d, ret = %d\n",
+				i, ret);
+			return ret;
+		}
 
-	ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
-	if (ret)
-		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
+		ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
+		if (ret)
+			dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs: %d\n", ret);
+	}
 
 	return 0;
 }