diff mbox series

[v2,1/3] dt-bindings: power: supply: Add TI TWL603X charger

Message ID 20240930155404.1275702-2-andreas@kemnade.info
State Superseded
Headers show
Series power: supply: twl6030/32 charger | expand

Commit Message

Andreas Kemnade Sept. 30, 2024, 3:54 p.m. UTC 
Use a fallback compatible since for especially for generic
defensive setup of parameters, both 6030 and 6032 are the same and
U-Boot actually uses a generic 6030/32 function to enable the
charger.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 .../power/supply/ti,twl6030-charger.yaml      | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/ti,twl6030-charger.yaml

Comments

Krzysztof Kozlowski Oct. 1, 2024, 7:02 a.m. UTC | #1 
On Mon, Sep 30, 2024 at 05:54:02PM +0200, Andreas Kemnade wrote:
> Use a fallback compatible since for especially for generic
> defensive setup of parameters, both 6030 and 6032 are the same and
> U-Boot actually uses a generic 6030/32 function to enable the
> charger.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>  .../power/supply/ti,twl6030-charger.yaml      | 48 +++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/ti,twl6030-charger.yaml

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/supply/ti,twl6030-charger.yaml b/Documentation/devicetree/bindings/power/supply/ti,twl6030-charger.yaml
new file mode 100644
index 0000000000000..fc604d8a469df
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,twl6030-charger.yaml
@@ -0,0 +1,48 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,twl6030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TWL6030/32 BCI (Battery Charger Interface)
+
+description:
+  The battery charger needs to be configured to do any charging besides of
+  precharging. The GPADC in the PMIC has to be used to get the related
+  voltages.
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,twl6030-charger
+      - items:
+          - const: ti,twl6032-charger
+          - const: ti,twl6030-charger
+
+  interrupts:
+    items:
+      - description: Charger Control Interrupt
+      - description: Charger Fault Interrupt
+
+  io-channels:
+    items:
+      - description: VBUS Voltage Channel
+
+  io-channel-names:
+    items:
+      - const: vusb
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - interrupts
+  - monitored-battery
+
+additionalProperties: false