| Message ID | 20240925232409.2208515-1-robh@kernel.org |
|---|---|
| State | Accepted |
| Commit | a6fa1f9e32f573faf53f9587ddbb70a0b9ab8c9f |
| Headers | show |
| Series | dt-bindings: Fix array property constraints | expand |
On Wed, 25 Sep 2024 18:24:06 -0500, Rob Herring (Arm) wrote: > Schemas for array properties should only have 1 level of array > constraints (e.g. items, maxItems, minItems). Sometimes the old > encoding of all properties into a matrix leaked into the schema, and > didn't matter for validation. Now the inner constraints are just > silently ignored as json-schema array keywords are ignored on scalar > values. > > [...] Applied, thanks! [1/1] dt-bindings: Fix array property constraints commit: 72c65390c61fc96cebfb91c300ca774925565383 Best regards,
On Tue, Oct 22, 2024 at 12:33 AM Vinod Koul <vkoul@kernel.org> wrote: > > > On Wed, 25 Sep 2024 18:24:06 -0500, Rob Herring (Arm) wrote: > > Schemas for array properties should only have 1 level of array > > constraints (e.g. items, maxItems, minItems). Sometimes the old > > encoding of all properties into a matrix leaked into the schema, and > > didn't matter for validation. Now the inner constraints are just > > silently ignored as json-schema array keywords are ignored on scalar > > values. > > > > [...] > > Applied, thanks! > > [1/1] dt-bindings: Fix array property constraints > commit: 72c65390c61fc96cebfb91c300ca774925565383 Why? It is already in my tree and not just dma bindings. Rob
On 22-10-24, 15:46, Rob Herring wrote: > On Tue, Oct 22, 2024 at 12:33 AM Vinod Koul <vkoul@kernel.org> wrote: > > > > > > On Wed, 25 Sep 2024 18:24:06 -0500, Rob Herring (Arm) wrote: > > > Schemas for array properties should only have 1 level of array > > > constraints (e.g. items, maxItems, minItems). Sometimes the old > > > encoding of all properties into a matrix leaked into the schema, and > > > didn't matter for validation. Now the inner constraints are just > > > silently ignored as json-schema array keywords are ignored on scalar > > > values. > > > > > > [...] > > > > Applied, thanks! > > > > [1/1] dt-bindings: Fix array property constraints > > commit: 72c65390c61fc96cebfb91c300ca774925565383 > > Why? It is already in my tree and not just dma bindings. Dropped now
diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml index d7840a5c4037..10c1a900202f 100644 --- a/Documentation/devicetree/bindings/cache/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml @@ -100,9 +100,8 @@ properties: filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 arm,io-coherent: description: indicates that the system is operating in an hardware diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index ea700f8ee6c6..fde5160b5d29 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -32,10 +32,9 @@ properties: The first item in the array is for channels 0-31, the second is for channels 32-63, etc. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 1 - # Should be enough - maxItems: 255 + minItems: 1 + # Should be enough + maxItems: 255 dma-channels: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 5f051c666cbe..f3247a47f9ee 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -132,10 +132,9 @@ properties: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 1 - maxItems: 2 + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - $ref: /schemas/types.yaml#/definitions/uint64 ppi-partitions: type: object @@ -223,9 +222,8 @@ patternProperties: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml index 535acf2b88a9..bc339a7374b2 100644 --- a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml +++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml @@ -135,8 +135,7 @@ properties: data-lanes: $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes - items: - maxItems: 4 + maxItems: 4 description: This property is for lane reordering between the THP7312 and the imaging sensor that it is connected to. diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index 10a2d97e5f8b..a5598ade399f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -66,9 +66,8 @@ patternProperties: samsung,srom-timing: $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 6 - maxItems: 6 + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 0925c520195a..2ad1652c2584 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -92,9 +92,8 @@ properties: may have two component regions -- base and extended -- so this information cannot be deduced from the dma-ranges. $ref: /schemas/types.yaml#/definitions/uint64-array - items: - minItems: 1 - maxItems: 3 + minItems: 1 + maxItems: 3 resets: minItems: 1 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml index 141d666dc3f7..1ba1d419e83b 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -55,8 +55,7 @@ properties: qcom,smem: $ref: /schemas/types.yaml#/definitions/uint32-array - items: - maxItems: 2 + maxItems: 2 description: Two identifiers of the inbound and outbound smem items used for this edge.
Schemas for array properties should only have 1 level of array constraints (e.g. items, maxItems, minItems). Sometimes the old encoding of all properties into a matrix leaked into the schema, and didn't matter for validation. Now the inner constraints are just silently ignored as json-schema array keywords are ignored on scalar values. Generally, keep the inner constraints and drop the outer "items". With gicv3 "mbi-alias" property, it is more appropriately a uint32 or uint64 as it is an address and size depends on "#address-cells". Signed-off-by: Rob Herring (Arm) <robh@kernel.org> --- Documentation/devicetree/bindings/cache/l2c2x0.yaml | 5 ++--- .../devicetree/bindings/dma/dma-common.yaml | 7 +++---- .../bindings/interrupt-controller/arm,gic-v3.yaml | 12 +++++------- .../devicetree/bindings/media/i2c/thine,thp7312.yaml | 3 +-- .../bindings/memory-controllers/exynos-srom.yaml | 5 ++--- .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 5 ++--- .../devicetree/bindings/soc/qcom/qcom,smp2p.yaml | 3 +-- 7 files changed, 16 insertions(+), 24 deletions(-)