new file mode 100644
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV08X40 CMOS Sensor
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |-
+ The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports.
+ - Automatic black level calibration (ABLC)
+ - Programmable controls for frame rate, mirror and flip, binning, cropping
+ and windowing
+ - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW
+ - 4-lane MIPI D-PHY TX @ 1 Gbps per lane
+ - 2-lane MPIP D-PHY TX @ 2 Gbps per lane
+ - Dynamic defect pixel cancellation
+ - Standard SCCB command interface
+
+properties:
+ compatible:
+ const: ovti,ov08x40
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ avdd-supply:
+ description: Analogue circuit voltage supply.
+
+ dovdd-supply:
+ description: I/O circuit voltage supply.
+
+ dvdd-supply:
+ description: Digital circuit voltage supply.
+
+ reset-gpios:
+ description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov08x40: camera@36 {
+ compatible = "ovti,ov08x40";
+ reg = <0x36>;
+
+ reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_rgb_defaultt>;
+
+ clocks = <&ov08x40_clk>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ avdd-supply = <&vreg_l7b_2p8>;
+ dvdd-supply = <&vreg_l7b_1p8>;
+ dovdd-supply = <&vreg_l3m_1p8>;
+
+ port {
+ ov08x40_ep: endpoint {
+ remote-endpoint = <&csiphy4_ep>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <400000000>;
+ };
+ };
+ };
+ };
+...
Add bindings for the already upstream OV08X40 to enable usage of this sensor on dts based systems. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- .../bindings/media/i2c/ovti,ov08x40.yaml | 130 +++++++++++++++++++++ 1 file changed, 130 insertions(+)