diff mbox series

[v1,4/5] i2c: designware: Use sda_hold_time variable name everywhere

Message ID 20240925124916.976173-5-andriy.shevchenko@linux.intel.com
State New
Headers show
Series i2c: designware: Cleanups (part 4) | expand

Commit Message

Andy Shevchenko Sept. 25, 2024, 12:44 p.m. UTC 
Currently the PCI glue driver uses sda_hold variable name, while
the rest of the driver use sda_hold_time. This makes things harder
to grep. Use sda_hold_time variable name everywhere.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 433cb285d3b2..38265c3dc454 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -51,7 +51,7 @@  struct dw_scl_sda_cfg {
 	u16 fs_hcnt;
 	u16 ss_lcnt;
 	u16 fs_lcnt;
-	u32 sda_hold;
+	u32 sda_hold_time;
 };
 
 struct dw_pci_controller {
@@ -76,7 +76,7 @@  static struct dw_scl_sda_cfg byt_config = {
 	.fs_hcnt = 0x55,
 	.ss_lcnt = 0x200,
 	.fs_lcnt = 0x99,
-	.sda_hold = 0x6,
+	.sda_hold_time = 0x6,
 };
 
 /* Haswell HCNT/LCNT/SDA hold time */
@@ -85,14 +85,14 @@  static struct dw_scl_sda_cfg hsw_config = {
 	.fs_hcnt = 0x48,
 	.ss_lcnt = 0x01fb,
 	.fs_lcnt = 0xa0,
-	.sda_hold = 0x9,
+	.sda_hold_time = 0x9,
 };
 
 /* NAVI-AMD HCNT/LCNT/SDA hold time */
 static struct dw_scl_sda_cfg navi_amd_config = {
 	.ss_hcnt = 0x1ae,
 	.ss_lcnt = 0x23a,
-	.sda_hold = 0x9,
+	.sda_hold_time = 0x9,
 };
 
 static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -264,7 +264,7 @@  static int i2c_dw_pci_probe(struct pci_dev *pdev,
 		dev->fs_hcnt = cfg->fs_hcnt;
 		dev->ss_lcnt = cfg->ss_lcnt;
 		dev->fs_lcnt = cfg->fs_lcnt;
-		dev->sda_hold_time = cfg->sda_hold;
+		dev->sda_hold_time = cfg->sda_hold_time;
 	}
 
 	adap = &dev->adapter;