diff mbox series

[v2,12/13] ufs: core: remove link_startup_again logic

Message ID 20240920-topic-ufs-enhancements-v2-12-65ae61e73eaa@linaro.org
State New
Headers show
Series ufs: enhancements to support Qualcomm UFS controllers | expand

Commit Message

Neil Armstrong Sept. 20, 2024, 8 a.m. UTC 
The link_startup_again logic was added in Linux to handle device
that were set in LinkDown state, which should not be the case since U-boot
doesn't set LinkDown state are init, and Linux sets the device active
in ufshcd_init() for the first link startup.

ufshcd_set_ufs_dev_active(hba) is called at ufshcd_init() right before
scheduling an ufshcd_async_scan that will call ufshcd_device_init() then ufshcd_link_startup().

The comment in probe says:
    /*
     * We are assuming that device wasn't put in sleep/power-down
     * state exclusively during the boot stage before kernel.
     * This assumption helps avoid doing link startup twice during
     * ufshcd_probe_hba().
     */
we can assume the same from U-Boot.

While it worked to far, it breaks link startup for Qualcomm Controllers v5,
let's just remove the logic.

Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/ufs/ufs.c | 8 --------
 1 file changed, 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
index d2df5c26f76..e34e4586224 100644
--- a/drivers/ufs/ufs.c
+++ b/drivers/ufs/ufs.c
@@ -462,9 +462,7 @@  static int ufshcd_link_startup(struct ufs_hba *hba)
 {
 	int ret;
 	int retries = DME_LINKSTARTUP_RETRIES;
-	bool link_startup_again = true;
 
-link_startup:
 	do {
 		ufshcd_ops_link_startup_notify(hba, PRE_CHANGE);
 
@@ -490,12 +488,6 @@  link_startup:
 		/* failed to get the link up... retire */
 		goto out;
 
-	if (link_startup_again) {
-		link_startup_again = false;
-		retries = DME_LINKSTARTUP_RETRIES;
-		goto link_startup;
-	}
-
 	/* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */
 	ufshcd_init_pwr_info(hba);