diff mbox

[02/20] Documentation: dt-bindings: rename meson-usb2-phy to meson8b-usb2-phy

Message ID 1479475723-4857-3-git-send-email-kishon@ti.com
State New
Headers show

Commit Message

Kishon Vijay Abraham I Nov. 18, 2016, 1:28 p.m. UTC 
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>


The corresponding driver only supports the USB PHY on Meson8b and GXBB
SoCs. Newer SoC versions are using a different USB PHY implementation,
which will mean that a new driver is required. Thus make sure that our
naming is specific enough so it does not conflict with upcoming drivers.

Acked-by: Rob Herring <robh@kernel.org>

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 .../devicetree/bindings/phy/meson-usb2-phy.txt     |   27 --------------------
 .../devicetree/bindings/phy/meson8b-usb2-phy.txt   |   27 ++++++++++++++++++++
 2 files changed, 27 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt

-- 
1.7.9.5
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
deleted file mode 100644
index bc616c1..0000000
--- a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
+++ /dev/null
@@ -1,27 +0,0 @@ 
-* Amlogic USB2 PHY
-
-Required properties:
-- compatible:	Depending on the platform this should be one of:
-	"amlogic,meson8b-usb2-phy"
-	"amlogic,meson-gxbb-usb2-phy"
-- reg:		The base address and length of the registers
-- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
-- clocks:	phandle and clock identifier for the phy clocks
-- clock-names:	"usb_general" and "usb"
-
-Optional properties:
-- resets:	reference to the reset controller
-- phy-supply:	see phy-bindings.txt in this directory
-
-
-Example:
-
-usb0_phy: usb-phy@c0000000 {
-	compatible = "amlogic,meson-gxbb-usb2-phy";
-	#phy-cells = <0>;
-	reg = <0x0 0xc0000000 0x0 0x20>;
-	resets = <&reset RESET_USB_OTG>;
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-	phy-supply = <&usb_vbus>;
-};
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
new file mode 100644
index 0000000..5fa73b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -0,0 +1,27 @@ 
+* Amlogic Meson8b and GXBB USB2 PHY
+
+Required properties:
+- compatible:	Depending on the platform this should be one of:
+	"amlogic,meson8b-usb2-phy"
+	"amlogic,meson-gxbb-usb2-phy"
+- reg:		The base address and length of the registers
+- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
+- clocks:	phandle and clock identifier for the phy clocks
+- clock-names:	"usb_general" and "usb"
+
+Optional properties:
+- resets:	reference to the reset controller
+- phy-supply:	see phy-bindings.txt in this directory
+
+
+Example:
+
+usb0_phy: usb-phy@c0000000 {
+	compatible = "amlogic,meson-gxbb-usb2-phy";
+	#phy-cells = <0>;
+	reg = <0x0 0xc0000000 0x0 0x20>;
+	resets = <&reset RESET_USB_OTG>;
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	phy-supply = <&usb_vbus>;
+};