diff mbox series

[PULL,21/27] hw/net/can/xlnx-versal-canfd: Fix byte ordering

Message ID 20240913151411.2167922-22-peter.maydell@linaro.org
State New
Headers show
Series [PULL,01/27] hw/s390/ccw-device: Convert to three-phase reset | expand

Commit Message

Peter Maydell Sept. 13, 2024, 3:14 p.m. UTC 
From: Doug Brown <doug@schmorgal.com>

The endianness of the CAN data was backwards in each group of 4 bytes.
For example, the following data:

00 11 22 33 44 55 66 77

was showing up like this:

33 22 11 00 77 66 55 44

Fix both the TX and RX code to put the data in the correct order.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-6-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/can/xlnx-versal-canfd.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/hw/net/can/xlnx-versal-canfd.c b/hw/net/can/xlnx-versal-canfd.c
index 9fba5b9dfc5..bcfffee1cc2 100644
--- a/hw/net/can/xlnx-versal-canfd.c
+++ b/hw/net/can/xlnx-versal-canfd.c
@@ -951,7 +951,7 @@  static void regs2frame(XlnxVersalCANFDState *s, qemu_can_frame *frame,
     }
 
     for (j = 0; j < frame->can_dlc; j++) {
-        val = 8 * i;
+        val = 8 * (3 - i);
 
         frame->data[j] = extract32(s->regs[reg_num + 2 + (j / 4)], val, 8);
         i++;
@@ -1093,19 +1093,19 @@  static void store_rx_sequential(XlnxVersalCANFDState *s,
             case 0:
                 rx_reg_num = i / 4;
 
-                data_reg_val = FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES3,
+                data_reg_val = FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES0,
                                           frame->data[i]);
                 break;
             case 1:
-                data_reg_val |= FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES2,
-                                           frame->data[i]);
-                break;
-            case 2:
                 data_reg_val |= FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES1,
                                            frame->data[i]);
                 break;
+            case 2:
+                data_reg_val |= FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES2,
+                                           frame->data[i]);
+                break;
             case 3:
-                data_reg_val |= FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES0,
+                data_reg_val |= FIELD_DP32(0, RB_DW0_REGISTER, DATA_BYTES3,
                                            frame->data[i]);
                 /*
                  * Last Bytes data which means we have all 4 bytes ready to