diff mbox

[v2,5/5] arm64: dts: exynos: TM2 - remove unused UART3 and set clocks directly on CMU

Message ID 1479373081-11586-6-git-send-email-m.szyprowski@samsung.com
State New
Headers show

Commit Message

Marek Szyprowski Nov. 17, 2016, 8:58 a.m. UTC 
UART3 device is not really needed for enabling audio block on TM2.
Enabling it made it working by enabling some common parent clocks,
what is now handled by improved exynos5433 clocks driver. Thus the UART3
device node can be safely disabled. The assigned-clocks entries are
however still needed, so move them under the respective CMU node.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index a0ccc9d3a716..48da2095e381 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -165,6 +165,11 @@ 
 	};
 };
 
+&cmu_aud {
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
 &cmu_fsys {
 	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
@@ -988,12 +993,6 @@ 
 	status = "okay";
 };
 
-&serial_3 {
-	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
-	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-	status = "okay";
-};
-
 &spi_1 {
 	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";