diff mbox series

[wireless-next,1/2] wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()

Message ID 20240903110205.4127706-2-lizetao1@huawei.com
State New
Headers show
Series wifi: Convert using devm_clk_get_optional_enabled() | expand

Commit Message

Li Zetao Sept. 3, 2024, 11:02 a.m. UTC 
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path, drop
the clk_disable_unprepare label, and the original error process can change
to dispose_irq.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/net/wireless/microchip/wilc1000/sdio.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

Comments

Kalle Valo Sept. 9, 2024, 12:30 p.m. UTC | #1 
Li Zetao <lizetao1@huawei.com> wrote:

> Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
> clk_prepare_enable(), which can make the clk consistent with the device
> life cycle and reduce the risk of unreleased clk resources. Since the
> device framework has automatically released the clk resource, there is
> no need to execute clk_disable_unprepare(clk) on the error path, drop
> the clk_disable_unprepare label, and the original error process can change
> to dispose_irq.
> 
> Signed-off-by: Li Zetao <lizetao1@huawei.com>

2 patches applied to wireless-next.git, thanks.

554475248177 wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
ff63a5c72782 wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
diff mbox series

Patch

diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 0043f7a0fdf9..a09ea24074e2 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -174,19 +174,18 @@  static int wilc_sdio_probe(struct sdio_func *func,
 	wilc->bus_data = sdio_priv;
 	wilc->dev = &func->dev;
 
-	wilc->rtc_clk = devm_clk_get_optional(&func->card->dev, "rtc");
+	wilc->rtc_clk = devm_clk_get_optional_enabled(&func->card->dev, "rtc");
 	if (IS_ERR(wilc->rtc_clk)) {
 		ret = PTR_ERR(wilc->rtc_clk);
 		goto dispose_irq;
 	}
-	clk_prepare_enable(wilc->rtc_clk);
 
 	wilc_sdio_init(wilc, false);
 
 	ret = wilc_load_mac_from_nv(wilc);
 	if (ret) {
 		pr_err("Can not retrieve MAC address from chip\n");
-		goto clk_disable_unprepare;
+		goto dispose_irq;
 	}
 
 	wilc_sdio_deinit(wilc);
@@ -195,14 +194,12 @@  static int wilc_sdio_probe(struct sdio_func *func,
 				   NL80211_IFTYPE_STATION, false);
 	if (IS_ERR(vif)) {
 		ret = PTR_ERR(vif);
-		goto clk_disable_unprepare;
+		goto dispose_irq;
 	}
 
 	dev_info(&func->dev, "Driver Initializing success\n");
 	return 0;
 
-clk_disable_unprepare:
-	clk_disable_unprepare(wilc->rtc_clk);
 dispose_irq:
 	irq_dispose_mapping(wilc->dev_irq_num);
 	wilc_netdev_cleanup(wilc);
@@ -217,7 +214,6 @@  static void wilc_sdio_remove(struct sdio_func *func)
 	struct wilc *wilc = sdio_get_drvdata(func);
 	struct wilc_sdio *sdio_priv = wilc->bus_data;
 
-	clk_disable_unprepare(wilc->rtc_clk);
 	wilc_netdev_cleanup(wilc);
 	kfree(sdio_priv->cmd53_buf);
 	kfree(sdio_priv);