diff mbox series

[v2,1/2] wifi: ath11k: move update channel list from update reg worker to reg notifier

Message ID 20240906033200.472-2-quic_kangyang@quicinc.com
State New
Headers show
Series wifi: ath11k: fix data out of sync for channel list for reg update | expand

Commit Message

Kang Yang Sept. 6, 2024, 3:31 a.m. UTC 
From: Wen Gong <quic_wgong@quicinc.com>

Currently ath11k call regulatory_set_wiphy_regd() in ath11k_regd_update()
to notify the reg domain change to cfg80211 and update channel list by
reg_work, then ath11k immediately update channel list to firmware by
ath11k_reg_update_chan_list(). 

callstack:
ath11k_regd_update
->regulatory_set_wiphy_regd
           -> schedule_work(&reg_work)
-> ath11k_reg_update_chan_list

They are running in two threads, it leads the channel list data out of
sync caused by muti-threads without synchronization. At this time,
ath11k may update wrong channel list to firmware because the reg_work
still running or even hasn't started yet.

The correct flow is after reg_work update the channel list according to
new reg domain, ath11k call ath11k_reg_update_chan_list() and update the
new channel list to firmware.

reg_call_notifier()(finally it will call ath11k_reg_notifier()) will be
called to by reg_work to notify ath11k when it finishes the channel
list update. So at this time, call ath11k_reg_update_chan_list() in
reg_call_notifier() with initiator type NL80211_REGDOM_SET_BY_DRIVER.
Then ath11k_reg_update_chan_list() will use the correct channel list.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Fixes: f45cb6b29cd3 ("wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/reg.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

Comments

Jeff Johnson Sept. 17, 2024, 2:51 p.m. UTC | #1 
On 9/5/2024 8:31 PM, Kang Yang wrote:
> From: Wen Gong <quic_wgong@quicinc.com>
> 
> Currently ath11k call regulatory_set_wiphy_regd() in ath11k_regd_update()
> to notify the reg domain change to cfg80211 and update channel list by
> reg_work, then ath11k immediately update channel list to firmware by
> ath11k_reg_update_chan_list(). 
> 
> callstack:
> ath11k_regd_update
> ->regulatory_set_wiphy_regd
>            -> schedule_work(&reg_work)
> -> ath11k_reg_update_chan_list
> 
> They are running in two threads, it leads the channel list data out of
> sync caused by muti-threads without synchronization. At this time,
> ath11k may update wrong channel list to firmware because the reg_work
> still running or even hasn't started yet.
> 
> The correct flow is after reg_work update the channel list according to
> new reg domain, ath11k call ath11k_reg_update_chan_list() and update the
> new channel list to firmware.
> 
> reg_call_notifier()(finally it will call ath11k_reg_notifier()) will be
> called to by reg_work to notify ath11k when it finishes the channel
> list update. So at this time, call ath11k_reg_update_chan_list() in
> reg_call_notifier() with initiator type NL80211_REGDOM_SET_BY_DRIVER.
> Then ath11k_reg_update_chan_list() will use the correct channel list.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
> 
> Fixes: f45cb6b29cd3 ("wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()")
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index b0f289784dd3..cb2cf9b63d18 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -55,6 +55,19 @@  ath11k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 	ath11k_dbg(ar->ab, ATH11K_DBG_REG,
 		   "Regulatory Notification received for %s\n", wiphy_name(wiphy));
 
+	if (request->initiator == NL80211_REGDOM_SET_BY_DRIVER) {
+		ath11k_dbg(ar->ab, ATH11K_DBG_REG,
+			   "driver initiated regd update\n");
+		if (ar->state != ATH11K_STATE_ON)
+			return;
+
+		ret = ath11k_reg_update_chan_list(ar, true);
+		if (ret)
+			ath11k_warn(ar->ab, "failed to update channel list: %d\n", ret);
+
+		return;
+	}
+
 	/* Currently supporting only General User Hints. Cell base user
 	 * hints to be handled later.
 	 * Hints from other sources like Core, Beacons are not expected for
@@ -293,12 +306,6 @@  int ath11k_regd_update(struct ath11k *ar)
 	if (ret)
 		goto err;
 
-	if (ar->state == ATH11K_STATE_ON) {
-		ret = ath11k_reg_update_chan_list(ar, true);
-		if (ret)
-			goto err;
-	}
-
 	return 0;
 err:
 	ath11k_warn(ab, "failed to perform regd update : %d\n", ret);
@@ -977,6 +984,7 @@  void ath11k_regd_update_work(struct work_struct *work)
 void ath11k_reg_init(struct ath11k *ar)
 {
 	ar->hw->wiphy->regulatory_flags = REGULATORY_WIPHY_SELF_MANAGED;
+	ar->hw->wiphy->flags |= WIPHY_FLAG_NOTIFY_REGDOM_BY_DRIVER;
 	ar->hw->wiphy->reg_notifier = ath11k_reg_notifier;
 }