@@ -784,9 +784,6 @@ efi_status_t efi_get_memory_map(efi_uintn_t *memory_map_size,
uint32_t *descriptor_version);
/* Adds a range into the EFI memory map */
efi_status_t efi_add_memory_map(u64 start, u64 size, int memory_type);
-/* Adds a conventional range into the EFI memory map */
-efi_status_t efi_add_conventional_memory_map(u64 ram_start, u64 ram_end,
- u64 ram_top);
/* Called by board init to initialize the EFI drivers */
efi_status_t efi_driver_init(void);
@@ -1172,9 +1169,14 @@ efi_status_t efi_console_get_u16_string
efi_status_t efi_disk_get_device_name(const efi_handle_t handle, char *buf, int size);
/**
- * efi_add_known_memory() - add memory banks to EFI memory map
+ * efi_add_known_memory() - add memory types to the EFI memory map
*
- * This weak function may be overridden for specific architectures.
+ * This function is to be used to adding different memory types other
+ * than EFI_CONVENTIONAL_MEMORY to the EFI memory map. The conventional
+ * memory is handled by the LMB module, and gets added to the memory
+ * map through the LMB module.
+ *
+ * This function may be overridden for specific architectures.
*/
void efi_add_known_memory(void);
@@ -784,82 +784,17 @@ efi_status_t efi_get_memory_map_alloc(efi_uintn_t *map_size,
}
/**
- * efi_add_conventional_memory_map() - add a RAM memory area to the map
+ * efi_add_known_memory() - add memory types to the EFI memory map
*
- * @ram_start: start address of a RAM memory area
- * @ram_end: end address of a RAM memory area
- * @ram_top: max address to be used as conventional memory
- * Return: status code
- */
-efi_status_t efi_add_conventional_memory_map(u64 ram_start, u64 ram_end,
- u64 ram_top)
-{
- u64 pages;
-
- /* Remove partial pages */
- ram_end &= ~EFI_PAGE_MASK;
- ram_start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
-
- if (ram_end <= ram_start) {
- /* Invalid mapping */
- return EFI_INVALID_PARAMETER;
- }
-
- pages = (ram_end - ram_start) >> EFI_PAGE_SHIFT;
-
- efi_add_memory_map_pg(ram_start, pages,
- EFI_CONVENTIONAL_MEMORY, false);
-
- /*
- * Boards may indicate to the U-Boot memory core that they
- * can not support memory above ram_top. Let's honor this
- * in the efi_loader subsystem too by declaring any memory
- * above ram_top as "already occupied by firmware".
- */
- if (ram_top < ram_start) {
- /* ram_top is before this region, reserve all */
- efi_add_memory_map_pg(ram_start, pages,
- EFI_BOOT_SERVICES_DATA, true);
- } else if (ram_top < ram_end) {
- /* ram_top is inside this region, reserve parts */
- pages = (ram_end - ram_top) >> EFI_PAGE_SHIFT;
-
- efi_add_memory_map_pg(ram_top, pages,
- EFI_BOOT_SERVICES_DATA, true);
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- * efi_add_known_memory() - add memory banks to map
+ * This function is to be used to adding different memory types other
+ * than EFI_CONVENTIONAL_MEMORY to the EFI memory map. The conventional
+ * memory is handled by the LMB module, and gets added to the memory
+ * map through the LMB module.
*
* This function may be overridden for specific architectures.
*/
__weak void efi_add_known_memory(void)
{
- u64 ram_top = gd->ram_top & ~EFI_PAGE_MASK;
- int i;
-
- /*
- * ram_top is just outside mapped memory. So use an offset of one for
- * mapping the sandbox address.
- */
- ram_top = (uintptr_t)map_sysmem(ram_top - 1, 0) + 1;
-
- /* Fix for 32bit targets with ram_top at 4G */
- if (!ram_top)
- ram_top = 0x100000000ULL;
-
- /* Add RAM */
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- u64 ram_end, ram_start;
-
- ram_start = (uintptr_t)map_sysmem(gd->bd->bi_dram[i].start, 0);
- ram_end = ram_start + gd->bd->bi_dram[i].size;
-
- efi_add_conventional_memory_map(ram_start, ram_end, ram_top);
- }
}
/**